EFI OpenCore 0.8.2

This release is currently up-to-date with OpenCore 0.8.2 spec.

Added new ResetNvram driver and fixed the config.plist accordingly

EFI OpenCore 0.8.0

This release is currently up-to-date with OpenCore 0.8.0 spec.

Added OpenCanopy support by default, as well as boot chime audio file in UEFI space

EFI OpenCore 0.7.9

This release is currently up-to-date with OpenCore 0.7.9 spec. No big changes so far except updating kexts/drivers to their respective latest versions.

EFI OpenCore 0.7.6

This release is currently up-to-date with OpenCore's 0.7.6 spec, and adds support for PS-2 keyboards since the connector is present. I chose not to include PS2 mice since I found them very imprecise

EFI OpenCore 0.7.4

Big jump from 0.7.1, this release is currently up-to-date with OpenCore's 0.7.4 spec

EFI OpenCore 0.7.1

This release is currently up-to-date with OpenCore's 0.7.1 spec

These fixes are included with this release:

New feautures:

• Added custom kernel support in ESP (from OpenCore 0.7.1)
• Updated kexts

N.B. I've tested TpmInfo.efi and this firmware supports Discrete TPM 1.2 so if you're going to use Windows 11 on this machine you might need to find some workaround or buy a hardware TPM to support TPM 2.0

EFI OpenCore 0.7.0

This release is currently up-to-date with OpenCore's 0.7.0 spec

These fixes are included with this release:

New feautures:

• Added support for USB tethering (HoRNDIS) thanks @jwise
• Added LauncherOption in order to see the boot entry name as OpenCore
• Added OpenCanopy support with Acidanthera/GoldenGate theme
• Added BootChime support
• Added FileVault 2 support with FirmwareVolume set to True

Corrected feautures:

• Enabled ThirdPartyDrives quirk for those who would like to use SATA drives (NVMe do not need this)
• Enabled 5 seconds Timeout in boot picker
• Removed unnecessary device-id for HD 4600

EFI OpenCore 0.6.8

This release is currently up-to-date with OpenCore's 0.6.8 spec

These fixes are included with this release:

• Added connector-type properties, (2 DP and 1 VGA port)
• Corrected XHC port current values to match those from an iMac15,1
• Re-added AppleHPET device since it is present on iMac15,1
• Added LPCB device in deviceproperties spoofing device id from Q85 to the one present in the iMac15,1 which is Z87
• (minor change) Removed OpenCanopy since the user can add it later if required
• (minor change) Reverted UIScale back to 01 for 1080p FHD displays