Module: Cava

The cava module for karlstav/cava

Config

Addressed by cava. Repeats and refers to the original Cava configuration. For any unclear option please check original cava documentation

option	typeof	default	description
cava_config	string		Path where cava configuration file is placed to
framerate	integer	60	Frames per second. Is used as a replacement for interval
autosens	integer	1	Will attempt to decrease sensitivity if the bars peak
sensitivity	integer	100	Manual sensitivity in %
bars	integer	12	The number of bars
lower_cutoff_freq	long integer	50	Lower cutoff frequencies for lowest bars the bandwidth of the visualizer
higher_cutoff_freq	long integer	10000	Higher cutoff frequencies for highest bars the bandwidth of the visualizer
sleep_timer	integer	5	Seconds with no input before cava main thread goes to sleep mode
method	string	pulse	Audio capturing method. Possible methods are: pipewire, pulse, alsa, fifo, sndio or shmem
source	string	auto	See cava configuration
sample_rate	long integer	44100	See cava configuration
sample_bits	integer	16	See cava configuration
stereo	bool	true	Visual channels
reverse	bool	false	Displays frequencies the other way around
bar_delimiter	integer	0	Each bar is separated by a delimiter. Use decimal value in ascii table(i.e. 59 = ";"). 0 means no delimiter
monstercat	bool	false	Disables or enables the so-called "Monstercat smoothing" with of without "waves"
waves	bool	false	Disables or enables the so-called "Monstercat smoothing" with of without "waves"
noise_reduction	double	0.77	Range between 0 - 1. The raw visualization is very noisy, this factor adjust the integral and gravity filters to keep the signal smooth. 1 - will be very slow and smooth, 0 - will be fast but noisy
input_delay	int	2	Sets the delay before fetching audio source thread start working. On author machine Waybar starts much faster then pipewire audio server, and without a little delay cava module fails due to pipewire is not ready
ascii_max_range	int	7	It's impossible to set it directly. The value is dictated by the number of icons in the array format-icons
data_format	string	asci	It's impossible to set it. Waybar sets it to = asci for internal needs
raw_target	string	/dev/stdout	It's impossible to set it. Waybar sets it to = /dev/stdout for internal needs

---

Configuration can be provided as:

1. The only cava configuration file which is provided through cava_config. The rest configuration can be skipped
2. Without cava configuration file. In such case cava should be configured through provided list of the configuration option
3. Mix. When provided both And cava configuration file And configuration options. In such case waybar applies configuration file first then overrides particular options by the provided list of configuration options

Actions

string	action
mode	Switch main cava thread and fetching audio source thread from/to pause/resume

Additional dependencies

iniparser
fftw3

Solving issues

• on start Waybar throws an exception "error while loading shared libraries: libcava.so: cannot open shared object file: No such file or diretory". It might happen when libcava for some reason hasn't been registered in the system. sudo ldconfig should help
• waybar is starting but cava module doesn't react on the music.
  • In such case for at first need to make sure usual cava application is working as well
  • If so, need to comment all configuration options. Uncomment cava_config and provide the path to the working cava config
  • You might set too huge or too small input_delay. Try to setup to 4 seconds, restart waybar and check again 4 seconds past. Usual even on weak machines it should be enough
  • You might accidentally switched action mode to pause mode

Rising issues

For clear understanding: this module is a cava API's consumer. So for any bugs related to cava engine you should contact to Cava upstream with the one Exception. Cava upstream doesn't provide cava as a shared library. For that this module author made a fork libcava. So the order is 1) cava upstream 2)libcava upstream. In case when cava releases new version and you're wanna get it in such case it should be rise and issue to libcava with title [Bump]x.x.x where x.x.x is cava release version.

Example:

"cava": {
//        "cava_config": "$XDG_CONFIG_HOME/cava/cava.conf",
        "framerate": 60,
        "autosens": 1,
        "sensitivity": 100,
        "bars": 14,
        "lower_cutoff_freq": 50,
        "higher_cutoff_freq": 10000,
        "method": "pulse",
        "source": "auto",
        "stereo": true,
        "reverse": false,
        "bar_delimiter": 0,
        "monstercat": false,
        "waves": false,
        "noise_reduction": 0.77,
        "input_delay": 2,
        "format-icons" : ["▁", "▂", "▃", "▄", "▅", "▆", "▇", "█" ],
        "actions": {
                   "on-click-right": "mode"
                   }
    },

232246280-71d3f5cb-db11-47a4-be38-ae383ebd5e6b.mp4