question about yolov3 tiny occlusion track?

[derekwong66]

Hi @AlexeyAB ,

Thanks for ur contribution. Can you explain more about how to train tiny-occlusion track cfg? which pre-trained weight we can use and crnn ?

thanks in advance.

[AlexeyAB]

@derekwong66 Hi,

• Use cfg-file: https://github.com/AlexeyAB/darknet/blob/master/cfg/yolov3-tiny_occlusion_track.cfg
• Use pre-trained file: yolov3-tiny.conv.15 that you can get from https://pjreddie.com/media/files/yolov3-tiny.weights by using command ./darknet partial cfg/yolov3-tiny.cfg yolov3-tiny.weights yolov3-tiny.conv.15 15

It is just an experimental detector (it isn't well tested yet)

1. that should have higher accuracy for detection on a video stream

2. should solve blinking issue, and 2 related problems: solve track_id migration from one object to another and solve false object counting on video, when detection disaper and apear again with new track_id (if you use yolo_console_dll.cpp (./uselib or yolo_console_dll.exe for counting objects)

3. and can solve occlusions issue (for two objects with different class_id, or object & background) for at least 20 frames time_steps=20 in the cfg-file.

---

(I have not tested yet it with random=1 in cfg-file)

You should train it on sequential frames from one or several videos:

• yolo_mark.exe data/occlusion cap_video occlusion.mp4 1 - it will grab each 1 frame from video (i.e. all frames) usually you should set max(1, camera_fps / detection_fps), preferably set lower value than higher, since it will be augmented by speed=3 in cfg-file (1x-3x times faster) during training (preferably to use the latest version of Yolo_mark https://github.com/AlexeyAB/Yolo_mark )

• yolo_mark.exe data/occlusion data/occlusion_train.txt data/occlusion.names - to mark bboxes, even if at some point the object is invisible (occlused/obscured by another type of object)

• darknet.exe detector train data/occlusion.data yolov3-tiny_occlusion_track.cfg yolov3-tiny.conv.15 -map - to train the detector & tracker

• darknet.exe detector demo data/occlusion.data yolov3-tiny_occlusion_track.cfg backup/yolov3-tiny_occlusion_track_10000.weights forward.avi - run detection

The only conditions - the frames from the video must go sequentially in the train.txt file.
And you should validate results on a separate Validation dataset, for example, divide your dataset into 2:

1. train.txt - first 80% of frames (80% from video1 + 80% from video 2, if you use frames from 2 videos)
2. valid.txt - last 20% of frames (20% from video1 + 20% from video 2, if you use frames from 2 videos)

---

Idea in simple words:

• Inside, this network works like a super resolution algorithm based on RNN/LSTM-layers (without image reconstruction), getting for itself a more detailed representation of objects from a variety of images (frames from video) - it can give higher accuracy: https://arxiv.org/abs/1704.02738 , https://arxiv.org/abs/1801.04590 , https://arxiv.org/abs/1805.02704

• A recurrent RNN/LSTM-layers allow network to memorize the state that if an object was detected on several frames, then it is highly likely that the object is present on several subsequent frames: https://arxiv.org/pdf/1607.05781.pdf

• The recurrent layers conv-RNN/conv-LSTM (with kernel_size=3) also allow network to predict and extrapolate the trajectory of motion of object.

---

Example of state of art super-resolution network: https://arxiv.org/abs/1704.02738

Example of object Detection and Tracking:

• https://github.com/abhineet123/Deep-Learning-for-Tracking-and-Detection/blob/master/video_detection/rnn/Context%20Matters%20Re%EF%AC%81ning%20Object%20Detection%20in%20Video%20with%20Recurrent%20Neural%20Networks%20bmvc16.pdf
• https://github.com/abhineet123/Deep-Learning-for-Tracking-and-Detection/blob/master/video_detection/rnn/Online%20Video%20Object%20Detection%20using%20Association%20LSTM%20iccv17.pdf

---

Your training process can looks like this:

[diennv]

Dear AlexeyAB,

I also have problem with track_id when using Yolov3 for counting objects on video.

I used yolov3.cfg for my own dataset.
I saw that yolov3-tiny_cocclusion_track.cfg haves some modification compared with yolov3-tiny.cfg.
In example, [crnn] layer is added...
I have a question. For yolov3.cfg, could i do same way to solve track_id issue ?

[AlexeyAB]

@diennv Hi,

For yolov3.cfg, could i do same way to solve track_id issue ?

Yes, you can.
Just it may require very much GPU-RAM for Yolov3 + CRNN, that can be trained only on highend GPUs.

Also later I will add conv-LSTM layer, that can work with higher accuracy.

[PythonImageDeveloper]

@AlexeyAB
Hi,
I have one 1080 GPU, Is this device enough for training the yolov3-tiny_cocclusion_track? yolo3-occlusion-track too?
Is the yolov3-tiny_cocclusion_track algorithm better than existing algorithms in OpenCV for training such as KFC, MOSSE,....?

[AlexeyAB]

@zeynali Hi,

GTX 1080 is enought for training yolov3-tiny_cocclusion_track.cfg
But if you want to create your custom yolo3-occlusion-track.cfg then you should use: Quadro RTX 8000 (48 GB GPU-RAM), Quadro GV100 (32 GB GPU-RAM), Nvidia TITAN V - CEO Edition (32 GB GPU-RAM), Tesla V100 32GB-Edition, DGX-2 with V100 32GB-edition

yolov3-tiny_cocclusion_track.cfg isn't well tested yet, and will be modified to use conv-LSTM instead of conv-RNN later. So I can't compare it with another algorithms.

[kamarulhairi]

Hi,

for the 3rd step which is to train the detector and tracker, where do i get the data/occlusion.data?

Thank You

[jacklin602]

Hi @AlexeyAB ,

Can you explain more about the rules of labeling bboxes for occlusion tracking?
If the object is totally invisible (occluded by another type of object or background), should i estimate and mark the object no matter how long it is occluded? If the object is partially occluded, should i only mark the visible area of the object or the estimated total extent of the object?

Thank you

[AlexeyAB]

@jacklin602 Hi,

If the object is totally invisible (occluded by another type of object or background), should i estimate and mark the object no matter how long it is occluded?

Yes, you should mark totally invisible objects in Training and Validation datasets.

---

If the object is partially occluded, should i only mark the visible area of the object or the estimated total extent of the object?

You can do as you want that it will be detected. Usually I mark the estimated total extent of the object.

Also in several days I will commit new version of yolov3-tiny_occlusion_track.cfg with convolutional-LSTM, that is works much better for occlusions.

[alexanderfrey]

@AlexeyAB Hi, I'm also very much interested into your LSTM implementation to compare it to Deep sort tracker.
Best
Alexander

[Tangotrax]

@AlexeyAB I'm also very much interested in your LSTM implementation

[AlexeyAB]

@alexanderfrey @Tangotrax @diennv @derekwong66 @PythonImageDeveloper @kamarulhairi

You can try to use LSTM-models with the latest version of Darknet: #3114 (comment)

For example, this model: https://github.com/AlexeyAB/darknet/files/3199631/yolo_v3_tiny_pan_lstm.cfg.txt

How to train: #3114 (comment)

[alexanderfrey]

@AlexeyAB Thanks, appreciate your work very much ! I am very excited to see how it performs. Any recommendations on how many sequences it should be trained with ?

[AlexeyAB]

@alexanderfrey There are no exact recommendations yet.
Just each sequence should have more than 200 frames.

[alexanderfrey]

@AlexeyAB
Hi Alexey,
thanks for your great work ! I trained a yolo_v3_tiny_pan_lstm like you explained in #3114 and the results look promising for the first 1000 iterations. I train on 15 video sequences with approx. 180 frames per sequences. (I know this should be higher)

Unfortunately the avg. loss becomes NAN after roughly 1200 iterations. I use the yolov3-tiny.conv.14 weights and I already set state_constrain=16 for each [conv_lstm] layer and sequential_subdivisions=8 and sgdr_cycle=10000. I train on 3 classes and adjusted the filters accordingly to 24(the ones before the yolo layers...) Anchors are default and I set batch and subdivision to 1. What else can I do to make the training run through ?

Thanks for any help

[AlexeyAB]

@alexanderfrey Hi,

Anchors are default and I set batch and subdivision to 1.

Did you set batch=1 subdivision=1 for training?
You must use

batch=16
subdivisions=4

you can increase batch, but you shouldn't decrease batch.

What GPU do you use?

---

If it doesn't help - then try to set

learning_rate=0.001
burn_in=1000
max_batches = 10000

policy=steps
steps=8000,9000
scales=.1,.1

If it doesn't help, then try to set learning_rate=0.0005 or learning_rate=0.0002

[alexanderfrey]

@AlexeyAB
Thank you very much for the answer. I started a new run this night with batch 64 and subdivision 64. So far its running. Should steps be 2 or 4 values ? In the default config file its 4 values....
Btw. is it possible to get the track_id of an object ?
Thanks !