| layout | title | nav_order | parent |
|---|---|---|---|
default |
A Note About Line Width |
1 |
Before We Begin |
{% comment %}
This page has moved! Please visit the new location.
{% endcomment %}
Any line widths in this guide are expressed as a percentage of nozzle diameter.
This allows the guide to remain agnostic to nozzles.
SuperSlicer natively allows percentages to be entered this way.
However:
- Prusa Slicer bases percentages on layer heights instead.
- Cura does not allow percentages at all.
- Other slicers may or may not support this.
For example, enter 0.48mm instead of 120% if you are using a 0.4mm nozzle.