Skip to content

Latest commit

 

History

History
231 lines (189 loc) · 9.77 KB

changelog.md

File metadata and controls

231 lines (189 loc) · 9.77 KB
Raw

Changelog

v2.4.2

  • Set first layer speeds to 50 rther then 50% as requested by @HansAndreManfredson
  • Changed M84 to M18 as suggested by @TheMasterOfTech
  • Went with fixed value (150 degrees) in start gcode to preven ooze on warmup

v2.4.1

  • Add missing M5C images

v2.4.0

  • Added AnkerMake M5C printer
  • Changed default PLA Color to yellow so it does not conflict with the selected object color (Green)
  • Merged PLA and PLA+ profiles as they were redundant

v2.3.3

  • Added New Profile for TPU (by @natescherer)
  • switched primary branch from "master" to "main"

v2.3.2

  • Improved PETG settings (by @Xelinor)
  • Added Lukagra's filament change gcode (better than just M600)
  • Slightly modified extrusion widths
  • Removed extruder default color so chosen filament color is used in the preview thumbnail
  • Removed duplicate filaments in the config bundle version

v2.3.1

  • fixed pattern match so fast profiles are available
  • Added config bundle to allow import to AnkerMake Alpha Slicer
  • Removed build workflow is it was not working
  • fixed minor issue with brim settings behavior

v2.3.0

  • Removed classic mode printer and tuned profiles to match performance
  • Added ooze reduction temps to start g-code (inspired by the Technical Ace's profiles)
  • Removed any settings that matched PrusaSlicer's default or have been deprecated to simplify configuration
  • Removed overhang speed reduction in fast mode.
  • Set organic supports as the default. support method
  • Tuning adjustments:
    • Enabled external_perimeters_first on fast mode for a SIGNIFICANT increase in surface quality
    • Modified gcode_resolution for finer slicing details
    • Modified the following to improve speeds
      • max_print_speed
      • solid_infill_speed
      • travel_acceleration
    • Modified the following to get smoother perimeters:
      • perimeter_acceleration
      • small_perimeter_speed
    • Modified skirt_distance to bring it slightly closer to print
    • first_layer_height now matches other layer heights
    • slight adjustments to better tune filaments
    • cleaned up windows install script

v2.2.0

  • Time estimates are much more accurate than previous versions
  • Added scripted install (thank you, @spuder)
  • Renamed old printer setup to "CLASSIC" and removed FAST from printer options more details are available in the readme.md
  • Allow higher quality profiles to be used in "FAST MODE."
  • Removed many unneeded settings that made no real difference
  • Tuned bridges (may still need some optimization)
  • Modified accelerations where they did not match firmware or provide better print quality.
  • Tuned printing speeds
  • Made default profiles have 3 perimeters
  • Fixed PETG temp bug

v2.1.1

  • No changes to settings, fixing a version mismatch to avoid confusion.
  • removed version number from published zip file.

v2.1.0

  • This version enables a fast mode consistently. See the readme.md for more details.
  • New community edition M5 icon for the configuration wizard
  • Optimized bottom and top surface patterns for regular profiles. (monotonic lines)
  • Tuned some speed settings and moved to percentages where possible.
  • Increased default fill density by 5% and reduced default perimeter to 2.
  • Increased infill overlap to close up some holes on surfaces
  • Minor adjuments to volumetric configurations to improve print quality and speeds
  • Implemented minimum print layer time on regular speed prints to increase quality.

v2.0.0-beta-1

1.10

  • Cura Profile Changes
    • Apply transparency to the bed plate to be able to work underneath
    • Add M420 S1 to start gcode for bed leveling (via contribution from @imadcat)
    • Fixed start gcode typo (via contribution from @JaredTamana)
  • Prusa Slicer Profile Changes
    • Apply transparency to bed plate to be able to work underneath
    • Add M420 S1 to start gcode for bed leveling (via contribution from @imadcat)
    • Fixed start gcode typo (via contribution from @JaredTamana)
    • Update file name format and remove commas to prevent export name issues on Mac
  • Other changes
    • Renamed primary branch to Main

1.9

  • Cura Profile Changes
    • Reset xy_offset_layer_0 to default to fix issue when using a brim
    • Added max acceleration speed logic
  • Prusa Slicer Profile Changes
    • Add a 0.6 nozzle profile
  • Other changes
    • Fix typo in Cura readme.md

1.8 - 12/7/2022

  • Cura Profile Changes
    • none
  • Prusa Slicer Profile Changes
    • Disabled "Thick bridges" to improve the quality on shorter bridges
  • Other changes
    • Migration from Google doc to GitHub repo for Prusa Slicer documentation and simplified install instructions and fixed nested directories in zip
    • Added required licenses
    • Added Repo Base Readme to point to both profile instructions
    • moved the changelog to its dedicated file
    • merged Prusa Slicer and Cura changelogs into one for ease of tracking

1.7 - 12/4/2022

  • Cura Profile Changes
    • Significant quality updates based on feedback from @Tenson_UK
      • For the normal profile, set the first layer height to match the rest of the print. (0.2)
      • Set "Initial Layer Horizontal Expansion" and "Hole Horizontal Expansion" to improve quality
      • Set "Top/Bottom Thickness" to improve quality
      • Changed infill logic to increase infill speeds.
        • NOTE: Part strength is slightly weaker, so adjust as needed.
      • Changed print temperature logic for more consistency
      • Changed "Top/Bottom Flow" and "Initial Layer Flow" to improve print quality
      • Set "Combing Mode" to "Within Infill" to reduce the number of retractions.
      • Complete rework of support settings that provides easy removal and good part support.
        • NOTE: Tree supports have no optimization at this time.
      • Adjusted the following experimental settings to improve print quality.
        • "Overhanging Wall Angle"
        • "Overhanging Wall Speed
        • "Small Hole Max Size"
        • "Small Feature Initial Layer Speed"
    • Regrouping/ordering of overrides to match base setting order
  • Prusa Slicer Profile Changes
    • none

1.6 - 12/4/2022

  • Cura Profile Changes
    • set retraciton speed to 60 to match AnkerMake defaults
  • Prusa Slicer Profile Changes
    • none

1.5 - 12/1/2022

  • Cura Profile Changes
    • add back in "extruder_nr": { "default_value": 0 }, to pass unit test and fix bug.
    • fix typos in readme.md
  • Prusa Slicer Profile Changes
    • none

1.4 - 12/1/2022

  • Cura Profile Changes
    • Complete refactor based on feedback from the Cura team to simplify the profile
      • Updated to follow new linting rules and suggestions
      • Significant reduction of base configuration overrides
      • Tested to ensure high-speed printing is functioning
      • Updated printing temperature logic to work correctly.
      • Added slight extrusion to start gcode to compensate for over-retraction after prime
    • Clarified instructions to locate folders
    • Migrated instructions From Google Docs to GitHub
    • Reversed the order of the changelog to show the newest first
  • Prusa Slicer Profile Changes
    • none

1.3 - 11/16/2022

  • Cura Profile Changes
    • Added “machine_head_with_fans_polygon” for one-at-a-time printing
    • Renamed image and platform object to match with GitHub submission. (Ultimaker/Cura#13628)
    • Slight modification to the file structure
    • Updated directions.
  • Prusa Slicer Profile Changes
    • none

1.2 - 10/22/2022

  • Cura Profile Changes
    • Fixed retraction amount defaults.
    • Adjusted acceleration to AnkerMake recommended settings.
    • Completely rebuilt settings from Anker profiles, so the values are consistent.
    • Update start and end gcode to Anker defaults
    • Added custom bed png image
    • Added more detailed settings provided by others
  • Prusa Slicer Profile Changes
    • Set default filament to PLA+
    • Enabled detect bridging perimeters
    • Increase skirt count from 1-3
    • Disabled filament override for max volumetric speed.
    • Change fan to be disabled from 1 to 2 layers
    • Turned off enabled auto cooling to prevent speed reduction
    • Adjusted first_layer_temperature for all filaments to match Anker slicer
    • Adjusted bed temperatures for ABS
    • Fix PLA+ inheriting values from PLA

1.1 - Bug Fixes

1.0 - Initial Release