[Edgecore][device][platform] Added support to as9736-64d platform #12904
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
- Why I did it
Need to support new platform as9736-64d
- How I did it
Add device files for new platform as9736-64d
- How to verify it
1. sonic-cli cmd: show platform {fan, temperature, firmware status, syseeprom, psustatus}
2. sfputil show {presence, eeprom, lpmode}
3. Use sonic-mgmt(/tests/platform_tests/api/{test_chassis.py, test_component.py, test_fan_drawer.py, test_psu.py, test_thermal.py, test_sfp.py})
Signed-off-by: michael_shih <michael_shih@edge-core.com>
|
This pull request introduces 12 alerts when merging 8a3823f into b774ebf - view on LGTM.com new alerts:
Heads-up: LGTM.com's PR analysis will be disabled on the 5th of December, and LGTM.com will be shut down ⏻ completely on the 16th of December 2022. Please enable GitHub code scanning, which uses the same CodeQL engine ⚙️ that powers LGTM.com. For more information, please check out our post on the GitHub blog. |
Signed-off-by: michael_shih <michael_shih@edge-core.com>
-Reason: FPGA driver can't write more than one byte to eeprom. Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
|
This pull request introduces 2 alerts when merging cb06ad5 into b774ebf - view on LGTM.com new alerts:
Heads-up: LGTM.com's PR analysis will be disabled on the 5th of December, and LGTM.com will be shut down ⏻ completely on the 16th of December 2022. Please enable GitHub code scanning, which uses the same CodeQL engine ⚙️ that powers LGTM.com. For more information, please check out our post on the GitHub blog. |
Signed-off-by: michael_shih <michael_shih@edge-core.com>
…ton_as9736_64d_psu.c). Signed-off-by: michael_shih <michael_shih@edge-core.com>
|
This pull request introduces 4 alerts when merging bd7b980 into f10f79b - view on LGTM.com new alerts:
Heads-up: LGTM.com's PR analysis will be disabled on the 5th of December, and LGTM.com will be shut down ⏻ completely on the 16th of December 2022. Please enable GitHub code scanning, which uses the same CodeQL engine ⚙️ that powers LGTM.com. For more information, please check out our post on the GitHub blog. |
Signed-off-by: michael_shih <michael_shih@edge-core.com>
8 tasks
…er_good= failed. Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
…sh_optoe_dev_class()) name from sfp.py(refresh_optoe_dev_class()) Signed-off-by: michael_shih <michael_shih@edge-core.com>
…al removal xcvr Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
…eshold value Signed-off-by: michael_shih <michael_shih@edge-core.com>
…sfs size create. Detail: When 400G xcvr plugin, fpga need to get support-pagable info from xcvr: If get info failed, do not create 256 bytes. Because this will let xcvr cannot get page1~page0xff's data. Enhance method is create 32,896 bytes( (1+256)*128 ) when get info failed. Signed-off-by: michael_shih <michael_shih@edge-core.com>
…AS9736-64D. Detail: Sync with #PR:11805 about part of as9736-64d Signed-off-by: michael_shih <michael_shih@edge-core.com>
… renaming sensors label. Signed-off-by: michael_shih <michael_shih@edge-core.com>
…ommand:[show platform ssdhealth --vendor]. Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
… port33~port64. Signed-off-by: michael_shih <michael_shih@edge-core.com>
…json(DPB config) Signed-off-by: michael_shih <michael_shih@edge-core.com>
…how evironment" & "sensors" Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
…ver by FPGA [Why to modify]: Read/write xcvr eeprom via fpga will msleep(1) when fpga finish i2c-trigger read/write. Sometimes it’s very fast to be finished, and do not need to wait as long as 1 ms. Need to enhance this part. [How to do]: 1. Referring to optoe.c, a write_timeout=25 is defined, because when we encounter a slower xcvr, need to retry within 25ms to ensure successful writing or reading of eeprom; on the other hand, xcvr can end faster. 2. Created 66 per port mutex to lock write/read eeprom, because HW confirm FPGA supports muti-access port for eeprom, instead of using one mutex-lock to access. Signed-off-by: michael_shih <michael_shih@edge-core.com>
Detail: refresh_optoe_dev_class() is called by event.py via xcvrd that detected xcvr new insert, and do the port eeprom-init. So, it did not need to run during the command of: sfputil, show interface, psuutil...etc. Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@edge-core.com>
… plan. What implement: XCVR rule: 1. fan driver modify that can set fan duty-cycle to 75% 2. When xcvr temperature > 70 ==> Increase fan duty-cycle from 50% to 75% 3. When xcvr temperature all < 60 ==> Decrease fan duty-cycle from 75% to 50% 3. Add syslog and console log for which criteria hit fan speed increase or decrease. Signed-off-by: michael_shih <michael_shih@edge-core.com>
…ge will increase slowly. [Why to fixed]: The root cause is get_name 64 times by every 10sec to get 64 port's interface, this will cause cpu usage keep increase slowly. Signed-off-by: michael_shih <michael_shih@edge-core.com>
7 tasks
…sync buffer to disk first. [Why to modify]: After doing cpu shutown and power-cycle, we'll find syslog loss shutdown message. So need to do sync buffer to disk command first. Signed-off-by: michael_shih <michael_shih@edge-core.com>
…sync buffer to disk first(1). Signed-off-by: michael_shih <michael_shih@edge-core.com>
Signed-off-by: michael_shih <michael_shih@accton.com>
8 tasks
… message. Signed-off-by: michael_shih <michael_shih@accton.com>
MuLinForest
pushed a commit
to MuLinForest/sonic-buildimage
that referenced
this pull request
Aug 6, 2024
…4d_syncd_failed [Sync PR sonic-net#15103] Provide proper configurations as its hardware design for AS9736-64D-100G based on PR:sonic-net#12904 and sonic-net#13762.
…ges by fan and psu monitor service. Signed-off-by: michael_shih <michael_shih@accton.com>
Closed
11 tasks
|
Collect all this PR's commits into one commit at new PR-20735, and close this PR. |
11 tasks
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: michael_shih michael_shih@edge-core.com
Why I did it
Need to support new platform as9736-64d
How I did it
Add device files for new platform as9736-64d
ex: sonic_platform
How to verify it
show platform {fan, temperature, firmware status, syseeprom, psustatus}show {presence, eeprom, lpmode}Test file path: /tests/platform_tests/api/Test items: test_chassis.py, test_component.py, test_fan_drawer.py, test_psu.py, test_thermal.py, test_sfp.pyWhich release branch to backport (provide reason below if selected)
Description for the changelog
Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)