-
Notifications
You must be signed in to change notification settings - Fork 1.4k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[Seastone] fix QSFP no change event issue for Seastone #13776
base: master
Are you sure you want to change the base?
Conversation
Why I did it Fix issue sonic-net#13581, QSFP remove/insert change events not deteted for seastone How I did it Change to use polling mode to retrieve SFP insert/remove change event, due to no SFP abs intr signal from CPLD. How to verify it After the fix, run 'show interfaces transceiver presence' and 'show interfaces transceiver eeprom' can show the correct SFP info. Signed-off-by: Eric Zhu <erzhu@celestica.com>
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
Tested on Seastone, works for optics, but not for DAC, maybe a new PR for DAC.
from .helper import APIHelper | ||
from sonic_py_common.logger import Logger | ||
except ImportError as e: | ||
raise ImportError(repr(e) + " - required module not found") | ||
|
||
|
||
QSFP_MODPRS_IRQ = '/sys/devices/platform/dx010_cpld/qsfp_modprs_irq' | ||
GPIO_SUS6 = "/sys/devices/platform/slx-ich.0/sci_int_gpio_sus6" | ||
QSFP_EVENT_POLLING_MODE = True |
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
We always use polling mode for seastones?
It's not true. It works for DAC. The downside is that it's not that fast to sync the status into DB. admin@sonic:~$ show interfaces transceiver presence
Port Presence
----------- -----------
Ethernet0 Present
Ethernet4 Not present
Ethernet8 Present
Ethernet12 Present
Ethernet16 Present
Ethernet20 Not present
Ethernet24 Not present
Ethernet28 Not present
Ethernet32 Not present
Ethernet36 Not present
Ethernet40 Present
Ethernet44 Not present
Ethernet48 Not present
Ethernet52 Not present
Ethernet56 Not present
Ethernet60 Not present
Ethernet64 Present
Ethernet68 Not present
Ethernet72 Not present
Ethernet76 Not present
Ethernet80 Not present
Ethernet84 Not present
Ethernet88 Not present
Ethernet92 Not present
Ethernet96 Not present
Ethernet100 Not present
Ethernet104 Not present
Ethernet108 Not present
Ethernet112 Not present
Ethernet116 Not present
Ethernet120 Not present
Ethernet124 Not present
admin@sonic:~$
admin@sonic:~$ show interface status
Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC
----------- --------------- ------- ----- ----- ------- ------ ------ ------- --------------- ----------
Ethernet0 65,66,67,68 100G 9100 N/A Eth1/1 routed up up QSFP28 or later N/A
Ethernet4 69,70,71,72 100G 9100 N/A Eth2/1 routed down up N/A N/A
Ethernet8 73,74,75,76 100G 9100 N/A Eth3/1 routed up up QSFP28 or later N/A
Ethernet12 77,78,79,80 100G 9100 N/A Eth4/1 routed up up QSFP28 or later N/A
Ethernet16 33,34,35,36 100G 9100 N/A Eth5/1 routed up up QSFP28 or later N/A
Ethernet20 37,38,39,40 100G 9100 N/A Eth6/1 routed down up N/A N/A
Ethernet24 41,42,43,44 100G 9100 N/A Eth7/1 routed down up N/A N/A
Ethernet28 45,46,47,48 100G 9100 N/A Eth8/1 routed down up N/A N/A
Ethernet32 49,50,51,52 100G 9100 N/A Eth9/1 routed down up N/A N/A
Ethernet36 53,54,55,56 100G 9100 N/A Eth10/1 routed down up N/A N/A
Ethernet40 57,58,59,60 100G 9100 N/A Eth11/1 routed up up QSFP28 or later N/A
Ethernet44 61,62,63,64 100G 9100 N/A Eth12/1 routed down up N/A N/A
Ethernet48 81,82,83,84 100G 9100 N/A Eth13/1 routed down up N/A N/A
Ethernet52 85,86,87,88 100G 9100 N/A Eth14/1 routed down up N/A N/A
Ethernet56 89,90,91,92 100G 9100 N/A Eth15/1 routed down up N/A N/A
Ethernet60 93,94,95,96 100G 9100 N/A Eth16/1 routed down up N/A N/A
Ethernet64 97,98,99,100 100G 9100 N/A Eth17/1 routed up up QSFP28 or later N/A
Ethernet68 101,102,103,104 100G 9100 N/A Eth18/1 routed down up N/A N/A
Ethernet72 105,106,107,108 100G 9100 N/A Eth19/1 routed down up N/A N/A
Ethernet76 109,110,111,112 100G 9100 N/A Eth20/1 routed down up N/A N/A
Ethernet80 1,2,3,4 100G 9100 N/A Eth21/1 routed down up N/A N/A
Ethernet84 5,6,7,8 100G 9100 N/A Eth22/1 routed down up N/A N/A
Ethernet88 9,10,11,12 100G 9100 N/A Eth23/1 routed down up N/A N/A
Ethernet92 13,14,15,16 100G 9100 N/A Eth24/1 routed down up N/A N/A
Ethernet96 17,18,19,20 100G 9100 N/A Eth25/1 routed down up N/A N/A
Ethernet100 21,22,23,24 100G 9100 N/A Eth26/1 routed down up N/A N/A
Ethernet104 25,26,27,28 100G 9100 N/A Eth27/1 routed down up N/A N/A
Ethernet108 29,30,31,32 100G 9100 N/A Eth28/1 routed down up N/A N/A
Ethernet112 113,114,115,116 100G 9100 N/A Eth29/1 routed down up N/A N/A
Ethernet116 117,118,119,120 100G 9100 N/A Eth30/1 routed down up N/A N/A
Ethernet120 121,122,123,124 100G 9100 N/A Eth31/1 routed down up N/A N/A
Ethernet124 125,126,127,128 100G 9100 N/A Eth32/1 routed down up N/A N/A
admin@sonic:~$ show interfaces transceiver eeprom
Ethernet0: SFP EEPROM detected
Application Advertisement: N/A
Connector: No separable connector
Encoding: 64B/66B
Extended Identifier: Power Class 1 Module (1.5W max.), No CLEI code present in Page 02h, No CDR in TX, No CDR in RX
Extended RateSelect Compliance: Unknown
Identifier: QSFP28 or later
Length Cable Assembly(m): 2.0
Nominal Bit Rate(100Mbs): 255
Specification compliance:
10/40G Ethernet Compliance Code: Extended
Extended Specification Compliance: 100GBASE-CR4, 25GBASE-CR CA-25G-L or 50GBASE-CR2 with RS
Fibre Channel Link Length: Unknown
Fibre Channel Speed: Unknown
Fibre Channel Transmission Media: Unknown
Fibre Channel Transmitter Technology: Unknown
Gigabit Ethernet Compliant Codes: Unknown
SAS/SATA Compliance Codes: Unknown
SONET Compliance Codes: Unknown
Vendor Date Code(YYYY-MM-DD Lot): 2019-09-14
Vendor Name: Amphenol
Vendor OUI: 78-a7-14
Vendor PN: NDAAFT-F312
Vendor Rev: D
Vendor SN: APF1937312431U
Ethernet4: SFP EEPROM Not detected
Ethernet8: SFP EEPROM detected
Application Advertisement: N/A
Connector: No separable connector
Encoding: Unspecified
Extended Identifier: Power Class 1 Module (1.5W max.), No CLEI code present in Page 02h, No CDR in TX, No CDR in RX
Extended RateSelect Compliance: Unknown
Identifier: QSFP28 or later
Length Cable Assembly(m): 2.0
Nominal Bit Rate(100Mbs): 255
Specification compliance:
10/40G Ethernet Compliance Code: Unknown
Extended Specification Compliance: 25GBASE-CR CA-25G-N or 50GBASE-CR2 with no FEC
Fibre Channel Link Length: Unknown
Fibre Channel Speed: Unknown
Fibre Channel Transmission Media: Twin Axial Pair (TW)
Fibre Channel Transmitter Technology: Unknown
Gigabit Ethernet Compliant Codes: Unknown
SAS/SATA Compliance Codes: Unknown
SONET Compliance Codes: Unknown
Vendor Date Code(YYYY-MM-DD Lot): 2019-09-04
Vendor Name: LUXSHARE-ICT
Vendor OUI: 3c-18-a0
Vendor PN: L0BQF105-SD-R
Vendor Rev: A
Vendor SN: 0BQF1059940007
Ethernet12: SFP EEPROM detected
Application Advertisement: N/A
Connector: No separable connector
Encoding: Unspecified
Extended Identifier: Power Class 1 Module (1.5W max.), No CLEI code present in Page 02h, No CDR in TX, No CDR in RX
Extended RateSelect Compliance: Unknown
Identifier: QSFP28 or later
Length Cable Assembly(m): 2.0
Nominal Bit Rate(100Mbs): 255
Specification compliance:
10/40G Ethernet Compliance Code: Unknown
Extended Specification Compliance: 25GBASE-CR CA-25G-N or 50GBASE-CR2 with no FEC
Fibre Channel Link Length: Unknown
Fibre Channel Speed: Unknown
Fibre Channel Transmission Media: Twin Axial Pair (TW)
Fibre Channel Transmitter Technology: Unknown
Gigabit Ethernet Compliant Codes: Unknown
SAS/SATA Compliance Codes: Unknown
SONET Compliance Codes: Unknown
Vendor Date Code(YYYY-MM-DD Lot): 2019-09-04
Vendor Name: LUXSHARE-ICT
Vendor OUI: 3c-18-a0
Vendor PN: L0BQF105-SD-R
Vendor Rev: A
Vendor SN: 0BQF1059940007
Ethernet16: SFP EEPROM detected
Application Advertisement: N/A
Connector: No separable connector
Encoding: 64B/66B
Extended Identifier: Power Class 1 Module (1.5W max.), No CLEI code present in Page 02h, No CDR in TX, No CDR in RX
Extended RateSelect Compliance: Unknown
Identifier: QSFP28 or later
Length Cable Assembly(m): 2.0
Nominal Bit Rate(100Mbs): 255
Specification compliance:
10/40G Ethernet Compliance Code: Extended
Extended Specification Compliance: 100GBASE-CR4, 25GBASE-CR CA-25G-L or 50GBASE-CR2 with RS
Fibre Channel Link Length: Unknown
Fibre Channel Speed: Unknown
Fibre Channel Transmission Media: Unknown
Fibre Channel Transmitter Technology: Unknown
Gigabit Ethernet Compliant Codes: Unknown
SAS/SATA Compliance Codes: Unknown
SONET Compliance Codes: Unknown
Vendor Date Code(YYYY-MM-DD Lot): 2019-09-14
Vendor Name: Amphenol
Vendor OUI: 78-a7-14
Vendor PN: NDAAFT-F312
Vendor Rev: D
Vendor SN: APF1937312431U
Ethernet20: SFP EEPROM Not detected
Ethernet24: SFP EEPROM Not detected
Ethernet28: SFP EEPROM Not detected
Ethernet32: SFP EEPROM Not detected
Ethernet36: SFP EEPROM Not detected
Ethernet40: SFP EEPROM detected
Application Advertisement: N/A
Connector: No separable connector
Encoding: PAM4
Extended Identifier: Power Class 1 Module (1.5W max.), No CLEI code present in Page 02h, No CDR in TX, No CDR in RX
Extended RateSelect Compliance: Unknown
Identifier: QSFP28 or later
Length Cable Assembly(m): 2.0
Nominal Bit Rate(100Mbs): 255
Specification compliance:
10/40G Ethernet Compliance Code: Extended
Extended Specification Compliance: 50GBASE-CR, 100GBASE-CR2, or 200GBASE-CR4
Fibre Channel Link Length: Unknown
Fibre Channel Speed: Unknown
Fibre Channel Transmission Media: Unknown
Fibre Channel Transmitter Technology: Unknown
Gigabit Ethernet Compliant Codes: Unknown
SAS/SATA Compliance Codes: Unknown
SONET Compliance Codes: Unknown
Vendor Date Code(YYYY-MM-DD Lot): 2020-12-01
Vendor Name: Molex
Vendor OUI: 00-09-3a
Vendor PN: 2058986020
Vendor Rev: 1
Vendor SN: 2033622834
Ethernet44: SFP EEPROM Not detected
Ethernet48: SFP EEPROM Not detected
Ethernet52: SFP EEPROM Not detected
Ethernet56: SFP EEPROM Not detected
Ethernet60: SFP EEPROM Not detected
Ethernet64: SFP EEPROM detected
Application Advertisement: N/A
Connector: No separable connector
Encoding: PAM4
Extended Identifier: Power Class 1 Module (1.5W max.), No CLEI code present in Page 02h, No CDR in TX, No CDR in RX
Extended RateSelect Compliance: Unknown
Identifier: QSFP28 or later
Length Cable Assembly(m): 2.0
Nominal Bit Rate(100Mbs): 255
Specification compliance:
10/40G Ethernet Compliance Code: Extended
Extended Specification Compliance: 50GBASE-CR, 100GBASE-CR2, or 200GBASE-CR4
Fibre Channel Link Length: Unknown
Fibre Channel Speed: Unknown
Fibre Channel Transmission Media: Unknown
Fibre Channel Transmitter Technology: Unknown
Gigabit Ethernet Compliant Codes: Unknown
SAS/SATA Compliance Codes: Unknown
SONET Compliance Codes: Unknown
Vendor Date Code(YYYY-MM-DD Lot): 2020-12-01
Vendor Name: Molex
Vendor OUI: 00-09-3a
Vendor PN: 2058986020
Vendor Rev: 1
Vendor SN: 2033622834
Ethernet68: SFP EEPROM Not detected
Ethernet72: SFP EEPROM Not detected
Ethernet76: SFP EEPROM Not detected
Ethernet80: SFP EEPROM Not detected
Ethernet84: SFP EEPROM Not detected
Ethernet88: SFP EEPROM Not detected
Ethernet92: SFP EEPROM Not detected
Ethernet96: SFP EEPROM Not detected
Ethernet100: SFP EEPROM Not detected
Ethernet104: SFP EEPROM Not detected
Ethernet108: SFP EEPROM Not detected
Ethernet112: SFP EEPROM Not detected
Ethernet116: SFP EEPROM Not detected
Ethernet120: SFP EEPROM Not detected
Ethernet124: SFP EEPROM Not detected |
I have made a PR that helps with speeding up the detection 10x and therefore sync #18041 |
Why I did it
Fix issue #13581, QSFP remove/insert change events not deteted for seastone
How I did it
Change to use polling mode to retrieve SFP insert/remove change event,
due to no SFP abs intr signal from CPLD.
How to verify it
After the fix, run 'show interfaces transceiver presence' and 'show interfaces transceiver eeprom'
can show the correct SFP info.
Which release branch to backport (provide reason below if selected)
Description for the changelog
Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)