Update Nokia PMON submodule

[mlok-nokia]

Why I did it

Update Nokia sonic-platform submodule which contains commits below
Update for the procedures for insertion/hot swap of Switch Fabric Module(SFM) by using "config chassis modules shutdown/startup" commands (#6)

This PR associates with PRs below to support "config chassis module shutdown/startup <module_name>" command Fabric module in Nokia-IXR7250E platform
PR sonic-net/sonic-utilities#3283
PR sonic-net/sonic-platform-daemons#475

Work item tracking

• Microsoft ADO (number only):

How I did it

Modify the set_admin_status() in module.py to shutdown/startup a Fabric Module.

How to verify it

The below test was carried out on FABRIC-CARD3 module on the supervisor card.
1. Shutdown
sudo config chassis modules shutdown FABRIC-CARD3

2. Check the status to see if the FABRIC-CARD3 was down.
$ show chassis modules status
        Name             Description    Physical-Slot    Oper-Status    Admin-Status       Serial
------------  ----------------------  ---------------  -------------  --------------  -----------
...
FABRIC-CARD3             Unavailable                4          Empty            down          N/A

sudo tail -f /var/log/syslog | grep "pmon#chassisd:"
May  1 00:07:54.192037 ixre-cpm-chassis15 WARNING pmon#chassisd: Module FABRIC-CARD3 went off-line!
 ...

 
3. Start up the module
sudo config chassis modules startup FABRIC-CARD3


4. Check the status
$ show chassis modules status
        Name             Description    Physical-Slot    Oper-Status    Admin-Status       Serial
------------  ----------------------  ---------------  -------------  --------------  -----------
...
FABRIC-CARD3                    SFM4                4         Online              up  01214400362

sudo tail -f /var/log/syslog | grep "pmon#chassisd:"
May  1 00:26:29.501687 ixre-cpm-chassis15 NOTICE pmon#chassisd: Module FABRIC-CARD3 recovered on-line!


5. To test if the operation is still valid when the system reboot. For example, first shut down, 
then after saving config and reboot, the module should keep shutdown status. 
$ sudo config save
Existing files will be overwritten, continue? [y/N]: y

Then check the status to see if the FABRIC-CARD3 was down.
$ show chassis modules status
        Name             Description    Physical-Slot    Oper-Status    Admin-Status       Serial
------------  ----------------------  ---------------  -------------  --------------  -----------
...
FABRIC-CARD3             Unavailable                4          Empty            down          N/A

Which release branch to backport (provide reason below if selected)

• 201811
• 201911
• 202006
• 202012
• 202106
• 202111
• 202205
• 202211
• 202305

Tested branch (Please provide the tested image version)

Description for the changelog

Link to config_db schema for YANG module changes

A picture of a cute animal (not mandatory but encouraged)

[mlok-nokia]

@judyjoseph Here is the PR to update the Nokia sonic-platform submodule to support "config chassis module shutdown/startup <module_name>" command for FABRIC module on Nokia-IXR7250 Supervisor card.

[JunhongMao]

The HLD for Shutdown and Startup of the Fabric Module is below:
sonic-net/SONiC#1694

[judyjoseph]

@JunhongMao @mlok-nokia please raise PR for master branch first for this change, we can cherry-pick to 202205 branch later.

[gechiang]

@mlok-nokia , is there a corresponding Master PR for this? I see that this PR is no longer needed as you already raised on directly in the MSFT repo 202205 branch (Azure/sonic-buildimage-msft#387).
But what is not clear is where is this same change for master branch? if not yet raised, can you please raise it in master first?
Thanks!

[gechiang]

@mlok-nokia , is there a corresponding Master PR for this? I see that this PR is no longer needed as you already raised on directly in the MSFT repo 202205 branch (sonic-net/sonic-buildimage-msft#387). But what is not clear is where is this same change for master branch? if not yet raised, can you please raise it in master first? Thanks!

According to @judyjoseph the master PR is this one: #18497

[judyjoseph]

@gechiang the change in this PR is already present in master via nokia platform submodule update done in PR : #18497.

Since we cannot take this PR in 202205 public branch, we have raised this new PR : Azure/sonic-buildimage-msft#387 in MSFT repo. Please merge

[judyjoseph]

we will be closing this PR

[mlok-nokia]

Close this PR. PR Azure/sonic-buildimage-msft#387 has been used for 202205 sonic-buildimage-msft