SSD1306.py

import spidev 
import RPi.GPIO as GPIO
import time

# Constants
SSD1306_SETCONTRAST = 0x81
SSD1306_DISPLAYALLON_RESUME = 0xA4
SSD1306_DISPLAYALLON = 0xA5
SSD1306_NORMALDISPLAY = 0xA6
SSD1306_INVERTDISPLAY = 0xA7
SSD1306_DISPLAYOFF = 0xAE
SSD1306_DISPLAYON = 0xAF
SSD1306_SETDISPLAYOFFSET = 0xD3
SSD1306_SETCOMPINS = 0xDA
SSD1306_SETVCOMDETECT = 0xDB
SSD1306_SETDISPLAYCLOCKDIV = 0xD5
SSD1306_SETPRECHARGE = 0xD9
SSD1306_SETMULTIPLEX = 0xA8
SSD1306_SETLOWCOLUMN = 0x00
SSD1306_SETHIGHCOLUMN = 0x10
SSD1306_SETSTARTLINE = 0x40
SSD1306_MEMORYMODE = 0x20
SSD1306_COLUMNADDR = 0x21
SSD1306_PAGEADDR = 0x22
SSD1306_COMSCANINC = 0xC0
SSD1306_COMSCANDEC = 0xC8
SSD1306_SEGREMAP = 0xA0
SSD1306_CHARGEPUMP = 0x8D
SSD1306_EXTERNALVCC = 0x1
SSD1306_SWITCHCAPVCC = 0x2

# Scrolling constants
SSD1306_ACTIVATE_SCROLL = 0x2F
SSD1306_DEACTIVATE_SCROLL = 0x2E
SSD1306_SET_VERTICAL_SCROLL_AREA = 0xA3
SSD1306_RIGHT_HORIZONTAL_SCROLL = 0x26
SSD1306_LEFT_HORIZONTAL_SCROLL = 0x27
SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL = 0x29
SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL = 0x2A

class SSD1306(object):
	"""class for SSD1306  128*64 0.96inch OLED displays."""
	
	def __init__(self,rst,dc,spi):
		self.width = 128
		self.height = 64
		self._pages = 8
		self._buffer = [0]*(self.width*self._pages)
		#Initialize DC RST pin
		self._dc = dc
		self._rst = rst
		GPIO.setmode(GPIO.BCM)
		GPIO.setwarnings(False)
		GPIO.setup(self._dc,GPIO.OUT)
		GPIO.setup(self._rst,GPIO.OUT)
		#Initialize SPI
		self._spi = spi
	def command(self,cmd):
		"""Send command byte to display"""
		GPIO.output(self._dc,GPIO.LOW)
		self._spi.writebytes([cmd])
	def data(self,val):
		"""Send byte of data to display"""
		GPIO.output(self._dc,GPIO.HIGHT)
		self._spi.writebytes([val])
	def begin(self,vccstate=SSD1306_SWITCHCAPVCC):
		"""Initialize dispaly"""
		self._vccstate = vccstate
		self.reset()
		self.command(SSD1306_DISPLAYOFF)                    # 0xAE
		self.command(SSD1306_SETDISPLAYCLOCKDIV)            # 0xD5
		self.command(0x80)                     # the suggested ra    tio 0x80
		
		self.command(SSD1306_SETMULTIPLEX)                  # 0xA8
		self.command(0x3F)
		self.command(SSD1306_SETDISPLAYOFFSET)              # 0xD3
		self.command(0x0)                                   # no offset
		self.command(SSD1306_SETSTARTLINE | 0x0)            # line #0
		self.command(SSD1306_CHARGEPUMP)                    # 0x8D
		if self._vccstate == SSD1306_EXTERNALVCC:
			self.command(0x10)
		else:
			self.command(0x14)
		self.command(SSD1306_MEMORYMODE)                    # 0x20
		self.command(0x00)                            # 0x0 act like ks0108        
		#[bb]self.command(SSD1306_SEGREMAP | 0x1)
		#[bb]self.command(SSD1306_COMSCANDEC)
		self.command(SSD1306_SEGREMAP)
		self.command(SSD1306_COMSCANINC)
		self.command(SSD1306_SETCOMPINS)                    # 0xDA
		self.command(0x12)
		self.command(SSD1306_SETCONTRAST)                   # 0x81
		if self._vccstate == SSD1306_EXTERNALVCC:
			self.command(0x9F)
		else:
			self.command(0xCF)
		self.command(SSD1306_SETPRECHARGE)                  # 0xd9
		if self._vccstate == SSD1306_EXTERNALVCC:
			self.command(0x22)
		else:
			self.command(0xF1)
		self.command(SSD1306_SETVCOMDETECT)                 # 0xDB
		self.command(0x40)
		self.command(SSD1306_DISPLAYALLON_RESUME)           # 0xA4
		self.command(SSD1306_NORMALDISPLAY)                 # 0xA6
		self.command(SSD1306_DISPLAYON)
	def reset(self):
		"""Reset the display"""
		GPIO.output(self._rst,GPIO.HIGH)
		time.sleep(0.001)
		GPIO.output(self._rst,GPIO.LOW)
		time.sleep(0.010)
		GPIO.output(self._rst,GPIO.HIGH)
	def display(self):
		"""Write display buffer to physical display"""
		self.command(SSD1306_COLUMNADDR)
		self.command(0)                  #Cloumn start address
		self.command(self.width-1)     #Cloumn end address
		self.command(SSD1306_PAGEADDR)
		self.command(0)					 #Page start address
		self.command(self._pages-1)		 #Page end address
		#Write buffer data
		GPIO.output(self._dc,GPIO.HIGH)
		self._spi.writebytes(self._buffer)
	def image(self, image):
		"""Set buffer to value of Python Imaging Library image."""
		if image.mode != '1':
			raise ValueError('Image must be in mode 1.')
		imwidth, imheight = image.size
		if imwidth != self.width or imheight != self.height:
			raise ValueError('Image must be same dimensions as display \
				({0}x{1}).' .format(self.width, self.height))

		pix = image.load()
		# Iterate through the memory pages
		index = 0
		for page in range(self._pages):
			# Iterate through all x axis columns.
			for x in range(self.width):
			# Set the bits for the column of pixels at the current position.
				bits = 0
				# Don't use range here as it's a bit slow
				for bit in [0, 1, 2, 3, 4, 5, 6, 7]:
					bits = bits << 1
					bits |= 0 if pix[(x, page*8+7-bit)] == 0 else 1
				# Update buffer byte and increment to next byte.
				self._buffer[index] = bits
				index += 1
	def clear(self):
		"""Clear contents of image buffer"""
		self._buffer = [0]*(self.width*self._pages)
	def set_contrast(self, contrast):
		"""Sets the contrast of the display.
		Contrast should be a value between 0 and 255."""
		if contrast < 0 or contrast > 255:
			raise ValueError('Contrast must be a value from 0 to 255).')
		self.command(SSD1306_SETCONTRAST)
		self.command(contrast)

	def dim(self, dim):
          """Adjusts contrast to dim the display if dim is True, 
          otherwise sets the contrast to normal brightness if dim is False."""
          # Assume dim display.
          contrast = 0
          # Adjust contrast based on VCC if not dimming.
          if not dim:
            if self._vccstate == SSD1306_EXTERNALVCC:
                contrast = 0x9F
            else:
                contrast = 0xCF