diff --git a/keyboards/sawnsprojects/amber80/readme.md b/keyboards/sawnsprojects/amber80/readme.md
new file mode 100644
index 000000000000..bc5dd417fcd8
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/readme.md
@@ -0,0 +1,25 @@
+# Amber80 solder
+
+A TKL keyboard sold in several variants.
+
+1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case.
+
+ **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
+
+* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
+* Hardware Supported: Amber80
+* Hardware Availability: Comming Soon
+
+Make examples for this keyboard (after setting up your build environment):
+
+ make sawnsprojects/amber80/solder:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/amber80/solder/config.h b/keyboards/sawnsprojects/amber80/solder/config.h
new file mode 100644
index 000000000000..90c9bc522c1c
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/config.h
@@ -0,0 +1,72 @@
+/* Copyright 2022 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5350
+#define PRODUCT_ID 0xA801
+#define DEVICE_VER 0x0001
+#define MANUFACTURER SawnsProjects X Yuutsu X Zlane
+#define PRODUCT Amber80 Solder
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 9
+
+/* Indicator */
+#define LED_CAPS_LOCK_PIN F5
+#define LED_SCROLL_LOCK_PIN B0
+#define LED_PIN_ON_STATE 0
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B1, B2, B3, B7, D0, D1, F1, F0, D7, B4, D5, D3 }
+#define MATRIX_COL_PINS { F4, F6, F7, C7, C6, B6, B5, D6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* RGB */
+#define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 22
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== or choose animations ==*/
+ #define RGBLIGHT_EFFECT_BREATHING
+ #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ #define RGBLIGHT_EFFECT_SNAKE
+ #define RGBLIGHT_EFFECT_KNIGHT
+ #define RGBLIGHT_EFFECT_CHRISTMAS
+ #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+ #define RGBLIGHT_EFFECT_RGB_TEST
+ #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
diff --git a/keyboards/sawnsprojects/amber80/solder/info.json b/keyboards/sawnsprojects/amber80/solder/info.json
new file mode 100644
index 000000000000..49ca20594c6a
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/info.json
@@ -0,0 +1,101 @@
+{
+ "keyboard_name": "Amber80 SOLDER",
+ "url": "",
+ "maintainer": "SawnsProjects",
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ { "label": "K00 (B1,F4)", "x": 0, "y": 0 },
+ { "label": "K10 (B2,F4)", "x": 1.25, "y": 0 },
+ { "label": "K01 (B1,F6)", "x": 2.25, "y": 0 },
+ { "label": "K11 (B2,F6)", "x": 3.25, "y": 0 },
+ { "label": "K02 (B1,F7)", "x": 4.25, "y": 0 },
+ { "label": "K12 (B2,F7)", "x": 5.5, "y": 0 },
+ { "label": "K03 (B1,C7)", "x": 6.5, "y": 0 },
+ { "label": "K13 (B2,C7)", "x": 7.5, "y": 0 },
+ { "label": "K04 (B1,C6)", "x": 8.5, "y": 0 },
+ { "label": "K14 (B2,C6)", "x": 9.75, "y": 0 },
+ { "label": "K05 (B1,B6)", "x": 10.75, "y": 0 },
+ { "label": "K15 (B2,B6)", "x": 11.75, "y": 0 },
+ { "label": "K06 (B1,B5)", "x": 12.75, "y": 0 },
+ { "label": "K16 (B2,B5)", "x": 14, "y": 0 },
+ { "label": "K17 (B2,D6)", "x": 15.25, "y": 0 },
+ { "label": "K08 (B1,D4)", "x": 16.25, "y": 0 },
+ { "label": "K18 (B2,D4)", "x": 17.25, "y": 0 },
+ { "label": "K20 (B3,F4)", "x": 0, "y": 1.25 },
+ { "label": "K30 (B7,F4)", "x": 1, "y": 1.25 },
+ { "label": "K21 (B3,F6)", "x": 2, "y": 1.25 },
+ { "label": "K31 (B7,F6)", "x": 3, "y": 1.25 },
+ { "label": "K22 (B3,F7)", "x": 4, "y": 1.25 },
+ { "label": "K32 (B7,F7)", "x": 5, "y": 1.25 },
+ { "label": "K23 (B3,C7)", "x": 6, "y": 1.25 },
+ { "label": "K33 (B7,C7)", "x": 7, "y": 1.25 },
+ { "label": "K24 (B3,C6)", "x": 8, "y": 1.25 },
+ { "label": "K34 (B7,C6)", "x": 9, "y": 1.25 },
+ { "label": "K25 (B3,B6)", "x": 10, "y": 1.25 },
+ { "label": "K35 (B7,B6)", "x": 11, "y": 1.25 },
+ { "label": "K26 (B3,B5)", "x": 12, "y": 1.25 },
+ { "label": "K36 (B7,B5)", "x": 13, "y": 1.25 },
+ { "label": "K27 (B3,D6)", "x": 14, "y": 1.25 },
+ { "label": "K37 (B7,D6)", "x": 15.25, "y": 1.25 },
+ { "label": "K28 (B3,D4)", "x": 16.25, "y": 1.25 },
+ { "label": "K38 (B7,D4)", "x": 17.25, "y": 1.25 },
+ { "label": "K40 (D0,F4)", "x": 0, "y": 2.25, "w": 1.5 },
+ { "label": "K50 (D1,F4)", "x": 1.5, "y": 2.25 },
+ { "label": "K41 (D0,F6)", "x": 2.5, "y": 2.25 },
+ { "label": "K51 (D1,F6)", "x": 3.5, "y": 2.25 },
+ { "label": "K42 (D0,F7)", "x": 4.5, "y": 2.25 },
+ { "label": "K52 (D1,F7)", "x": 5.5, "y": 2.25 },
+ { "label": "K43 (D0,C7)", "x": 6.5, "y": 2.25 },
+ { "label": "K53 (D1,C7)", "x": 7.5, "y": 2.25 },
+ { "label": "K44 (D0,C6)", "x": 8.5, "y": 2.25 },
+ { "label": "K54 (D1,C6)", "x": 9.5, "y": 2.25 },
+ { "label": "K45 (D0,B6)", "x": 10.5, "y": 2.25 },
+ { "label": "K55 (D1,B6)", "x": 11.5, "y": 2.25 },
+ { "label": "K46 (D0,B5)", "x": 12.5, "y": 2.25 },
+ { "label": "K56 (D1,B5)", "x": 13.5, "y": 2.25, "w": 1.5 },
+ { "label": "K57 (D1,D6)", "x": 15.25, "y": 2.25 },
+ { "label": "K48 (D0,D4)", "x": 16.25, "y": 2.25 },
+ { "label": "K58 (D1,D4)", "x": 17.25, "y": 2.25 },
+ { "label": "K60 (F1,F4)", "x": 0, "y": 3.25, "w": 1.75 },
+ { "label": "K70 (F0,F4)", "x": 1.75, "y": 3.25 },
+ { "label": "K61 (F1,F6)", "x": 2.75, "y": 3.25 },
+ { "label": "K71 (F0,F6)", "x": 3.75, "y": 3.25 },
+ { "label": "K62 (F1,F7)", "x": 4.75, "y": 3.25 },
+ { "label": "K72 (F0,F7)", "x": 5.75, "y": 3.25 },
+ { "label": "K63 (F1,C7)", "x": 6.75, "y": 3.25 },
+ { "label": "K73 (F0,C7)", "x": 7.75, "y": 3.25 },
+ { "label": "K64 (F1,C6)", "x": 8.75, "y": 3.25 },
+ { "label": "K74 (F0,C6)", "x": 9.75, "y": 3.25 },
+ { "label": "K65 (F1,B6)", "x": 10.75, "y": 3.25 },
+ { "label": "K75 (F0,B6)", "x": 11.75, "y": 3.25 },
+ { "label": "K76 (F0,B5)", "x": 12.75, "y": 3.25, "w": 2.25 },
+ { "label": "K80 (D7,F4)", "x": 0, "y": 4.25, "w": 1.25 },
+ { "label": "K90 (B4,F4)", "x": 1.25, "y": 4.25 },
+ { "label": "K81 (D7,F6)", "x": 2.25, "y": 4.25 },
+ { "label": "K91 (B4,F6)", "x": 3.25, "y": 4.25 },
+ { "label": "K82 (D7,F7)", "x": 4.25, "y": 4.25 },
+ { "label": "K92 (B4,F7)", "x": 5.25, "y": 4.25 },
+ { "label": "K83 (D7,C7)", "x": 6.25, "y": 4.25 },
+ { "label": "K93 (B4,C7)", "x": 7.25, "y": 4.25 },
+ { "label": "K84 (D7,C6)", "x": 8.25, "y": 4.25 },
+ { "label": "K94 (B4,C6)", "x": 9.25, "y": 4.25 },
+ { "label": "K85 (D7,B6)", "x": 10.25, "y": 4.25 },
+ { "label": "K95 (B4,B6)", "x": 11.25, "y": 4.25 },
+ { "label": "K86 (D7,B5)", "x": 12.25, "y": 4.25, "w": 1.75 },
+ { "label": "K96 (B4,B5)", "x": 14, "y": 4.25 },
+ { "label": "K88 (D7,D4)", "x": 16.25, "y": 4.25 },
+ { "label": "KA0 (D5,F4)", "x": 0, "y": 5.25, "w": 1.5 },
+ { "label": "KB0 (D3,F4)", "x": 1.5, "y": 5.25 },
+ { "label": "KA1 (D5,F6)", "x": 2.5, "y": 5.25, "w": 1.5 },
+ { "label": "KB3 (D3,C7)", "x": 4, "y": 5.25, "w": 7 },
+ { "label": "KA6 (D5,B5)", "x": 11, "y": 5.25, "w": 1.5 },
+ { "label": "KB6 (D3,B5)", "x": 12.5, "y": 5.25 },
+ { "label": "KA7 (D5,D6)", "x": 13.5, "y": 5.25, "w": 1.5 },
+ { "label": "KB7 (D3,D6)", "x": 15.25, "y": 5.25 },
+ { "label": "KA8 (D5,D4)", "x": 16.25, "y": 5.25 },
+ { "label": "KB8 (D3,D4)", "x": 17.25, "y": 5.25 }
+ ]
+ }
+ }
+}
diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c
new file mode 100644
index 000000000000..ffc9beb77258
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c
@@ -0,0 +1,30 @@
+/* Copyright 2022 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,
+
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ )
+};
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md
new file mode 100644
index 000000000000..60f00eb4ba78
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for Amber80 Solder
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c
new file mode 100644
index 000000000000..b8e80843748b
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c
@@ -0,0 +1,54 @@
+/* Copyright 2022 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,
+
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ [1] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [2] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ )
+};
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md
new file mode 100644
index 000000000000..3313fcc41a41
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md
@@ -0,0 +1 @@
+# The VIA keymap for Amber80 Solder
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk
new file mode 100644
index 000000000000..43061db1dd46
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk
@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/amber80/solder/readme.md b/keyboards/sawnsprojects/amber80/solder/readme.md
new file mode 100644
index 000000000000..a429328702d4
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/readme.md
@@ -0,0 +1,24 @@
+# Amber80 solder
+
+![Amber80](https://i.imgur.com/ygUgpqZh.jpg)
+
+A TKL keyboard sold in several variants.
+
+* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
+* Hardware Supported: Amber80
+* Hardware Availability: Comming Soon
+
+Make example for this keyboard (after setting up your build environment):
+
+ make sawnsprojects/amber80/solder:default
+
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/sawnsprojects/amber80/solder/rules.mk b/keyboards/sawnsprojects/amber80/solder/rules.mk
new file mode 100644
index 000000000000..4613b7d460e8
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/rules.mk
@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/amber80/solder/solder.c b/keyboards/sawnsprojects/amber80/solder/solder.c
new file mode 100644
index 000000000000..b7dbe1e5588b
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/solder.c
@@ -0,0 +1,17 @@
+/* Copyright 2022 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "solder.h"
diff --git a/keyboards/sawnsprojects/amber80/solder/solder.h b/keyboards/sawnsprojects/amber80/solder/solder.h
new file mode 100644
index 000000000000..9f76795162f0
--- /dev/null
+++ b/keyboards/sawnsprojects/amber80/solder/solder.h
@@ -0,0 +1,44 @@
+/* Copyright 2022 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_all( \
+ K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K17, K08, K18, \
+ K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, K38, \
+ K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K57, K48, K58, \
+ K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \
+ K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K96, K88, \
+ KA0, KB0, KA1, KB3, KA6, KB6, KA7, KB7, KA8, KB8 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, XXX, K08 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
+ { K40, K41, K42, K43, K44, K45, K46, XXX, K48 }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
+ { K60, K61, K62, K63, K64, K65, XXX, XXX, XXX }, \
+ { K70, K71, K72, K73, K74, K75, K76, XXX, XXX }, \
+ { K80, K81, K82, K83, K84, K85, K86, XXX, K88 }, \
+ { K90, K91, K92, K93, K94, K95, K96, XXX, XXX }, \
+ { KA0, KA1, XXX, XXX, XXX, XXX, KA6, KA7, KA8 }, \
+ { KB0, XXX, XXX, KB3, XXX, XXX, KB6, KB7, KB8 }, \
+}
+
diff --git a/keyboards/sawnsprojects/vcl65/readme.md b/keyboards/sawnsprojects/vcl65/readme.md
new file mode 100644
index 000000000000..025c41badf94
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/readme.md
@@ -0,0 +1,25 @@
+# VCL65 solder
+
+A 65% keyboard sold in several variants.
+
+1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "VCL65" with Lotus 65 lite keyboard case. Compatible with some 65% traymount case, VCL65 and Lotus65.
+
+ **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
+
+* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) & [Hoaq](https://github.com/itsmehoaq)
+* Hardware Supported: Lotus65 lite, VCL65, 65% traymount case
+* Hardware Availability: Private Discord GB
+
+Make examples for this keyboard (after setting up your build environment):
+
+ make sawnsprojects/vcl65/solder:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/config.h b/keyboards/sawnsprojects/vcl65/solder/config.h
new file mode 100644
index 000000000000..bf1a7cdde6e1
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/config.h
@@ -0,0 +1,66 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5350
+#define PRODUCT_ID 0x1727
+#define DEVICE_VER 0x0001
+#define MANUFACTURER VCL x SawnsProjects
+#define PRODUCT VCL65
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F6, F7, F0, F4, B1 }
+#define MATRIX_COL_PINS { B2, B5, F5, C7, B4, C6, D7, D6, D4, D5, D3, D2, B6, D1, D0 }
+#define UNUSED_PINS
+
+/* indicator */
+// #define LED_CAPS_LOCK_PIN F0
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+/* Caps Lock */
+#define LED_CAPS_LOCK_PIN F1
+#define LED_PIN_ON_STATE 0
+/* rotary */
+
+#define RGB_DI_PIN B7
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 20
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+/*== all animations enable ==*/
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#endif
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/info.json b/keyboards/sawnsprojects/vcl65/solder/info.json
new file mode 100644
index 000000000000..bae3093b4f8a
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/info.json
@@ -0,0 +1,81 @@
+{
+ "keyboard_name": "VCL65 Solder",
+ "url": "",
+ "maintainer": "MaiTheSan",
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ { "label": "K00 (F6,B2)", "x": 0, "y": 0 },
+ { "label": "K01 (F6,B5)", "x": 1, "y": 0 },
+ { "label": "K02 (F6,F5)", "x": 2, "y": 0 },
+ { "label": "K03 (F6,C7)", "x": 3, "y": 0 },
+ { "label": "K04 (F6,B4)", "x": 4, "y": 0 },
+ { "label": "K05 (F6,C6)", "x": 5, "y": 0 },
+ { "label": "K06 (F6,D7)", "x": 6, "y": 0 },
+ { "label": "K07 (F6,D6)", "x": 7, "y": 0 },
+ { "label": "K08 (F6,D4)", "x": 8, "y": 0 },
+ { "label": "K09 (F6,D5)", "x": 9, "y": 0 },
+ { "label": "K0A (F6,D3)", "x": 10, "y": 0 },
+ { "label": "K0B (F6,D2)", "x": 11, "y": 0 },
+ { "label": "K0C (F6,B6)", "x": 12, "y": 0 },
+ { "label": "K0D (F6,D1)", "x": 13, "y": 0 },
+ { "label": "K2C (F4,B6)", "x": 14, "y": 0 },
+ { "label": "K0E (F6,D0)", "x": 15, "y": 0 },
+ { "label": "K10 (F7,B2)", "x": 0, "y": 1, "w": 1.5 },
+ { "label": "K11 (F7,B5)", "x": 1.5, "y": 1 },
+ { "label": "K12 (F7,F5)", "x": 2.5, "y": 1 },
+ { "label": "K13 (F7,C7)", "x": 3.5, "y": 1 },
+ { "label": "K14 (F7,B4)", "x": 4.5, "y": 1 },
+ { "label": "K15 (F7,C6)", "x": 5.5, "y": 1 },
+ { "label": "K16 (F7,D7)", "x": 6.5, "y": 1 },
+ { "label": "K17 (F7,D6)", "x": 7.5, "y": 1 },
+ { "label": "K18 (F7,D4)", "x": 8.5, "y": 1 },
+ { "label": "K19 (F7,D5)", "x": 9.5, "y": 1 },
+ { "label": "K1A (F7,D3)", "x": 10.5, "y": 1 },
+ { "label": "K1B (F7,D2)", "x": 11.5, "y": 1 },
+ { "label": "K1C (F7,B6)", "x": 12.5, "y": 1 },
+ { "label": "K1D (F7,D1)", "x": 13.5, "y": 1, "w": 1.5 },
+ { "label": "K1E (F7,D0)", "x": 15, "y": 1 },
+ { "label": "K20 (F4,B2)", "x": 0, "y": 2, "w": 1.75 },
+ { "label": "K21 (F4,B5)", "x": 1.75, "y": 2 },
+ { "label": "K22 (F4,F5)", "x": 2.75, "y": 2 },
+ { "label": "K23 (F4,C7)", "x": 3.75, "y": 2 },
+ { "label": "K24 (F4,B4)", "x": 4.75, "y": 2 },
+ { "label": "K25 (F4,C6)", "x": 5.75, "y": 2 },
+ { "label": "K26 (F4,D7)", "x": 6.75, "y": 2 },
+ { "label": "K27 (F4,D6)", "x": 7.75, "y": 2 },
+ { "label": "K28 (F4,D4)", "x": 8.75, "y": 2 },
+ { "label": "K29 (F4,D5)", "x": 9.75, "y": 2 },
+ { "label": "K2A (F4,D3)", "x": 10.75, "y": 2 },
+ { "label": "K2B (F4,D2)", "x": 11.75, "y": 2 },
+ { "label": "K2D (F4,D1)", "x": 12.75, "y": 2, "w": 2.25 },
+ { "label": "K2E (F4,D0)", "x": 15, "y": 2 },
+ { "label": "K30 (B0,B2)", "x": 0, "y": 3, "w": 1.25 },
+ { "label": "K31 (B0,B5)", "x": 1.25, "y": 3 },
+ { "label": "K32 (B0,F5)", "x": 2.25, "y": 3 },
+ { "label": "K33 (B0,C7)", "x": 3.25, "y": 3 },
+ { "label": "K34 (B0,B4)", "x": 4.25, "y": 3 },
+ { "label": "K35 (B0,C6)", "x": 5.25, "y": 3 },
+ { "label": "K36 (B0,D7)", "x": 6.25, "y": 3 },
+ { "label": "K37 (B0,D6)", "x": 7.25, "y": 3 },
+ { "label": "K38 (B0,D4)", "x": 8.25, "y": 3 },
+ { "label": "K39 (B0,D5)", "x": 9.25, "y": 3 },
+ { "label": "K3A (B0,D3)", "x": 10.25, "y": 3 },
+ { "label": "K3B (B0,D2)", "x": 11.25, "y": 3 },
+ { "label": "K3C (B0,B6)", "x": 12.25, "y": 3, "w": 1.75 },
+ { "label": "K3D (B0,D1)", "x": 14, "y": 3 },
+ { "label": "K3E (B0,D0)", "x": 15, "y": 3 },
+ { "label": "K40 (B1,B2)", "x": 0, "y": 4, "w": 1.25 },
+ { "label": "K41 (B1,B5)", "x": 1.25, "y": 4, "w": 1.25 },
+ { "label": "K42 (B1,F5)", "x": 2.5, "y": 4, "w": 1.25 },
+ { "label": "K46 (B1,D7)", "x": 3.75, "y": 4, "w": 6.25 },
+ { "label": "K49 (B1,D5)", "x": 10, "y": 4 },
+ { "label": "K4A (B1,D3)", "x": 11, "y": 4 },
+ { "label": "K4B (B1,D2)", "x": 12, "y": 4 },
+ { "label": "K4C (B1,B6)", "x": 13, "y": 4 },
+ { "label": "K4D (B1,D1)", "x": 14, "y": 4 },
+ { "label": "K4E (B1,D0)", "x": 15, "y": 4 }
+ ]
+ }
+ }
+}
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/keymap.c
new file mode 100644
index 000000000000..f0d21c96bcf9
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/keymap.c
@@ -0,0 +1,38 @@
+/* Copyright 2022 Hoaq
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [1] = LAYOUT_all(
+ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_INS,
+ RESET, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, KC_MUTE,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS
+ ),
+
+};
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/readme.md
new file mode 100644
index 000000000000..d4a1e6fc318c
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for VCL65 solder
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/keymap.c b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/keymap.c
new file mode 100644
index 000000000000..86209da7dc6c
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/keymap.c
@@ -0,0 +1,50 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [1] = LAYOUT_all(
+ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [2] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+};
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/readme.md b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/readme.md
new file mode 100644
index 000000000000..dd1d8879df98
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/readme.md
@@ -0,0 +1 @@
+# The custom keymap for VCL65 solder by SawnsProjects
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/rules.mk b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/rules.mk
new file mode 100644
index 000000000000..036bd6d1c3ec
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/sawns/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/keymap.c
new file mode 100644
index 000000000000..708fc51d3d63
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/keymap.c
@@ -0,0 +1,51 @@
+/* Copyright 2022 Hoaq
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [1] = LAYOUT_all(
+ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_INS,
+ RESET, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, KC_MUTE,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS
+ ),
+ [2] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+};
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/readme.md
new file mode 100644
index 000000000000..31baf7fc7142
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/readme.md
@@ -0,0 +1 @@
+# The VIA keymap for VCL65 solder
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/rules.mk
new file mode 100644
index 000000000000..036bd6d1c3ec
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/readme.md b/keyboards/sawnsprojects/vcl65/solder/readme.md
new file mode 100644
index 000000000000..06b44ab73084
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/readme.md
@@ -0,0 +1,23 @@
+# VCL65 solder
+
+![VCL65 solder](https://i.imgur.com/ofSfOTfh.jpg)
+
+A 65% keyboard PCB made and sold under the name "VCL65 Solder" by SawnsProjects with Hoaq in Private Discord GB.
+
+* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) & [Hoaq](https://github.com/itsmehoaq)
+* Hardware Supported: Lotus65 lite, VCL65, 65% traymount case
+* Hardware Availability: Private Discord GB
+
+Make example for this keyboard (after setting up your build environment):
+
+ make sawnsprojects/vcl65/solder:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/sawnsprojects/vcl65/solder/rules.mk b/keyboards/sawnsprojects/vcl65/solder/rules.mk
new file mode 100644
index 000000000000..538e0d1bda1d
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/rules.mk
@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/solder.c b/keyboards/sawnsprojects/vcl65/solder/solder.c
new file mode 100644
index 000000000000..2fb9b24f8c2d
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/solder.c
@@ -0,0 +1,17 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "solder.h"
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/vcl65/solder/solder.h b/keyboards/sawnsprojects/vcl65/solder/solder.h
new file mode 100644
index 000000000000..8c150a1b96d2
--- /dev/null
+++ b/keyboards/sawnsprojects/vcl65/solder/solder.h
@@ -0,0 +1,36 @@
+/* Copyright 2021 SawnsProjects
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, K49, K4A, K4B, K4C, K4D, K4E }, \
+}
+