Skip to content

Latest commit

 

History

History
47 lines (35 loc) · 3.02 KB

README.md

File metadata and controls

47 lines (35 loc) · 3.02 KB

MinimOSD_MK2

MinimOSD made smaller with better pinout and USB. Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Firmware

After assembly, review the Firmware notes for loading software.

Configuration

There are four jumpers that are useful for configuration.

Two are sets of three pads labeled 12-5. The one closest to the IN pad sets the camera voltage. Shorting the two pads on the 12 side sends 12V to the camera, and the two closest to the 5 side sends 5V to the camera. The one nearest the OUT pad is the same for the VTX.

On the same side, there's an GND jumper which configures a common ground for the OSD itself and the video.

On the other side, there's one labeled +V which jumps the 5V input pins so you can have a single 5V input that is used for both outputs and operating the OSD itself.

BOM

Board

Top

Bottom