From 361b333d92ca89e886494bd964cab0350cbf1d83 Mon Sep 17 00:00:00 2001 From: imreddyTeja Date: Mon, 16 Sep 2024 17:41:59 -0700 Subject: [PATCH] Remove trailing whitespace --- .../Vegetation/canopy_parameterizations.jl | 114 +++++++++--------- 1 file changed, 57 insertions(+), 57 deletions(-) diff --git a/src/standalone/Vegetation/canopy_parameterizations.jl b/src/standalone/Vegetation/canopy_parameterizations.jl index 51389c28b5..9926496089 100644 --- a/src/standalone/Vegetation/canopy_parameterizations.jl +++ b/src/standalone/Vegetation/canopy_parameterizations.jl @@ -45,8 +45,8 @@ end θs::FT, ) -Returns the leaf angle distribution value for CLM G function as a function of the -solar zenith angle and the leaf orientation index. See section 3.1 of +Returns the leaf angle distribution value for CLM G function as a function of the +solar zenith angle and the leaf orientation index. See section 3.1 of https://www2.cesm.ucar.edu/models/cesm2/land/CLM50_Tech_Note.pdf """ function compute_G(G::CLMGFunction{FT}, θs::FT) where {FT} @@ -72,8 +72,8 @@ end ) Computes the PAR and NIR absorbances, reflectances, and tranmittances -for a canopy in the case of the -Beer-Lambert model. The absorbances are a function of the radiative transfer +for a canopy in the case of the +Beer-Lambert model. The absorbances are a function of the radiative transfer model, as well as the magnitude of incident PAR and NIR radiation in W/m^2, the leaf area index, the extinction coefficient, and the soil albedo in the PAR and NIR bands. Returns a @@ -130,11 +130,11 @@ end ) Computes the PAR and NIR absorbances, reflectances, and tranmittances -for a canopy in the case of the -Beer-Lambert model. The absorbances are a function of the radiative transfer -model, as well as the magnitude of incident PAR and NIR radiation in W/m^2, +for a canopy in the case of the +Beer-Lambert model. The absorbances are a function of the radiative transfer +model, as well as the magnitude of incident PAR and NIR radiation in W/m^2, the leaf area index, the extinction coefficient, and the -soil albedo in the PAR and NIR bands. +soil albedo in the PAR and NIR bands. This model also depends on the diffuse fraction and the zenith angle. Returns a @@ -191,14 +191,14 @@ end α_soil::FT ) -Computes the absorbed, reflected, and transmitted photon flux density -in terms of mol photons per m^2 per +Computes the absorbed, reflected, and transmitted photon flux density +in terms of mol photons per m^2 per second for a radiation band. -This applies the Beer-Lambert law, which is a function of incident +This applies the Beer-Lambert law, which is a function of incident radiation (`SW_IN`; moles of photons/m^2/), leaf reflectance (`α_leaf`), the extinction coefficient (`K`), leaf area index (`LAI`), -and the albedo of the soil (`α_soil`). +and the albedo of the soil (`α_soil`). Returns a tuple of reflected, absorbed, and transmitted radiation in mol photons/m^2/s. @@ -230,13 +230,13 @@ end α_soil::FT, ) -Computes the absorbed, transmitted, and reflected photon flux density -in terms of mol photons per m^2 per second for a radiation band. +Computes the absorbed, transmitted, and reflected photon flux density +in terms of mol photons per m^2 per second for a radiation band. This applies the two-stream radiative transfer solution which takes into account -the impacts of scattering within the canopy. The function takes in all -parameters from the parameter struct of a TwoStreamModel, along with the -incident radiation, LAI, extinction coefficient K, soil albedo from the +the impacts of scattering within the canopy. The function takes in all +parameters from the parameter struct of a TwoStreamModel, along with the +incident radiation, LAI, extinction coefficient K, soil albedo from the canopy soil_driver, solar zenith angle, and τ. Returns a tuple of reflected, absorbed, and transmitted radiation in @@ -276,7 +276,7 @@ function plant_absorbed_pfd( c²θ̄ = pi * G / 4 β = 0.5 * (ω + diff * c²θ̄) / ω - # Compute coefficients for two-stream solution + # Compute coefficients for two-stream solution b = 1 - ω + ω * β c = ω * β d = ω * β₀ * μ̄ * K @@ -312,7 +312,7 @@ function plant_absorbed_pfd( p₁ * s₂ * (d - c - h₁ / σ * (u₁ + μ̄ * K)) ) - # h coefficients for direct downward flux + # h coefficients for direct downward flux h₄ = -f * p₃ - c * d h₅ = -1 / d₂ * @@ -351,7 +351,7 @@ function plant_absorbed_pfd( # Compute cumulative LAI at this layer L = i * Lₗ - # Compute the direct fluxes into/out of the layer + # Compute the direct fluxes into/out of the layer I_dir_up = h₁ * exp(-K * L * Ω) / σ + h₂ * exp(-h * L * Ω) + @@ -368,7 +368,7 @@ function plant_absorbed_pfd( I_dif_up = h₇ * exp(-h * L * Ω) + h₈ * exp(h * L * Ω) I_dif_dn = h₉ * exp(-h * L * Ω) + h₁₀ * exp(h * L * Ω) - # Energy balance giving radiation absorbed in the layer + # Energy balance giving radiation absorbed in the layer if i == 0 I_dir_abs = 0 I_dif_abs = 0 @@ -385,7 +385,7 @@ function plant_absorbed_pfd( # Add radiation absorbed in the layer to total absorbed radiation F_abs += (1 - frac_diff) * I_dir_abs + (frac_diff) * I_dif_abs - # Save input/output values to compute energy balance of next layer + # Save input/output values to compute energy balance of next layer I_dir_up_prev = I_dir_up I_dir_dn_prev = I_dir_dn I_dif_up_prev = I_dif_up @@ -411,7 +411,7 @@ end Computes the fraction of diffuse radiation (`diff_frac`) as a function of the solar zenith angle (`θs`), the total surface incident shortwave radiation (`SW_IN`), the air temperature (`T`), air pressure (`P`), specific humidity (`q`), and the day of the year -(`td`). +(`td`). See Appendix A of Braghiere, "Evaluation of turbulent fluxes of CO2, sensible heat, and latent heat as a function of aerosol optical depth over the course of deforestation @@ -419,10 +419,10 @@ in the Brazilian Amazon" 2013. Note that cos(θs) is equal to zero when θs = π/2, and this is a coefficient of k₀, which we divide by in this expression. This can amplify small errors -when θs is near π/2. +when θs is near π/2. -This formula is empirical and can yied negative numbers depending on the -input, which, when dividing by something very near zero, +This formula is empirical and can yied negative numbers depending on the +input, which, when dividing by something very near zero, can become large negative numbers. Because of that, we cap the returned value to lie within [0,1]. @@ -481,7 +481,7 @@ end intercellular_co2(ca::FT, Γstar::FT, medlyn_factor::FT) where{FT} Computes the intercellular CO2 concentration (mol/mol) given the -atmospheric concentration (`ca`, mol/mol), the CO2 compensation (`Γstar`, +atmospheric concentration (`ca`, mol/mol), the CO2 compensation (`Γstar`, mol/mol), and the Medlyn factor (unitless). """ function intercellular_co2(ca::FT, Γstar::FT, medlyn_term::FT) where {FT} @@ -539,8 +539,8 @@ end Computes the Rubisco limiting rate of photosynthesis for C3 plants (`Ac`), in units of moles CO2/m^2/s, -as a function of the maximum rate of carboxylation of Rubisco (`Vcmax`), -the leaf internal carbon dioxide partial pressure (`ci`), +as a function of the maximum rate of carboxylation of Rubisco (`Vcmax`), +the leaf internal carbon dioxide partial pressure (`ci`), the CO2 compensation point (`Γstar`), and Michaelis-Menten parameters for CO2 and O2, respectively, (`Kc`) and (`Ko`). @@ -618,12 +618,12 @@ end max_electron_transport(Vcmax::FT) where {FT} Computes the maximum potential rate of electron transport (`Jmax`), -in units of mol/m^2/s, +in units of mol/m^2/s, as a function of Vcmax at 25 °C (`Vcmax25`), a constant (`ΔHJmax`), a standard temperature (`To`), the unversal gas constant (`R`), and the temperature (`T`). -See Table 11.5 of G. Bonan's textbook, +See Table 11.5 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ function max_electron_transport( @@ -649,7 +649,7 @@ in units of mol/m^2/s, as a function of the maximum potential rate of electron transport (`Jmax`), absorbed photosynthetically active radiation (`APAR`), an empirical "curvature parameter" (`θj`; Bonan Eqn 11.21) -and the quantum yield of photosystem II (`ϕ`). +and the quantum yield of photosystem II (`ϕ`). See Ch 11, G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ @@ -726,9 +726,9 @@ end β::FT) where {FT} Computes the total net carbon assimilation (`An`), -in units of mol CO2/m^2/s, as a function of +in units of mol CO2/m^2/s, as a function of the Rubisco limiting factor (`Ac`), the electron transport limiting rate (`Aj`), -dark respiration (`Rd`), and the moisture stress factor (`β`). +dark respiration (`Rd`), and the moisture stress factor (`β`). See Table 11.5 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ @@ -744,10 +744,10 @@ end Computes the moisture stress factor (`β`), which is unitless, as a function of -a constant (`sc`, 1/Pa), a reference pressure (`pc`, Pa), and -the leaf water pressure (`pl`, Pa) . +a constant (`sc`, 1/Pa), a reference pressure (`pc`, Pa), and +the leaf water pressure (`pl`, Pa) . -See Eqn 12.57 of G. Bonan's textbook, +See Eqn 12.57 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ function moisture_stress(pl::FT, sc::FT, pc::FT) where {FT} @@ -770,7 +770,7 @@ and the moisture stress factor (`β`), an empirical factor `f` is equal to 0.015 a constant (`ΔHRd`), a standard temperature (`To`), the unversal gas constant (`R`), and the temperature (`T`). -See Table 11.5 of G. Bonan's textbook, +See Table 11.5 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ function dark_respiration( @@ -792,7 +792,7 @@ end LAI::FT, Ω::FT) where {FT} -Computes the total canopy photosynthesis (`GPP`) as a function of +Computes the total canopy photosynthesis (`GPP`) as a function of the total net carbon assimilation (`An`), the extinction coefficient (`K`), leaf area index (`LAI`) and the clumping index (`Ω`). """ @@ -810,7 +810,7 @@ and (1) converts it to m/s, (2) upscales to the entire canopy, by assuming the leaves in the canopy are in parallel and hence multiplying by LAI. -TODO: Check what CLM does, and check if we can use the same function +TODO: Check what CLM does, and check if we can use the same function for GPP from An, and make more general. """ function upscale_leaf_conductance( @@ -828,10 +828,10 @@ end arrhenius_function(T::FT, To::FT, R::FT, ΔH::FT) Computes the Arrhenius function at temperature `T` given -the reference temperature `To=298.15K`, the universal +the reference temperature `To=298.15K`, the universal gas constant `R`, and the energy activation `ΔH`. -See Table 11.5 of G. Bonan's textbook, +See Table 11.5 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ function arrhenius_function(T::FT, To::FT, R::FT, ΔH::FT) where {FT} @@ -851,7 +851,7 @@ as a function of its value at 25 °C (`Kc25`), a constant (`ΔHkc`), a standard temperature (`To`), the unversal gas constant (`R`), and the temperature (`T`). -See Table 11.5 of G. Bonan's textbook, +See Table 11.5 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ function MM_Kc(Kc25::FT, ΔHkc::FT, T::FT, To::FT, R::FT) where {FT} @@ -872,7 +872,7 @@ as a function of its value at 25 °C (`Ko25`), a constant (`ΔHko`), a standard temperature (`To`), the universal gas constant (`R`), and the temperature (`T`). -See Table 11.5 of G. Bonan's textbook, +See Table 11.5 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ function MM_Ko(Ko25::FT, ΔHko::FT, T::FT, To::FT, R::FT) where {FT} @@ -888,11 +888,11 @@ end ep5::FT) where {FT} Computes the maximum rate of carboxylation of Rubisco (`Vcmax`), -in units of mol/m^2/s, +in units of mol/m^2/s, as a function of temperature (`T`), Vcmax at the reference temperature 25 °C (`Vcmax25`), the universal gas constant (`R`), and the reference temperature (`To`). -See Table 11.5 of G. Bonan's textbook, +See Table 11.5 of G. Bonan's textbook, Climate Change and Terrestrial Ecosystem Modeling (2019). """ function compute_Vcmax( @@ -936,13 +936,13 @@ end An::FT, ca::FT) where {FT} -Computes the stomatal conductance according to Medlyn, as a function of -the minimum stomatal conductance (`g0`), +Computes the stomatal conductance according to Medlyn, as a function of +the minimum stomatal conductance (`g0`), the relative diffusivity of water vapor with respect to CO2 (`Drel`), the Medlyn term (unitless), the biochemical demand for CO2 (`An`), and the atmospheric concentration of CO2 (`ca`). -This returns the conductance in units of mol/m^2/s. It must be converted to +This returns the conductance in units of mol/m^2/s. It must be converted to m/s using the molar density of water prior to use in SurfaceFluxes.jl. """ function medlyn_conductance( @@ -958,11 +958,11 @@ end """ penman_monteith( - Δ::FT, # Rate of change of saturation vapor pressure with air temperature. (Pa K−1) + Δ::FT, # Rate of change of saturation vapor pressure with air temperature. (Pa K−1) Rn::FT, # Net irradiance (W m−2) G::FT, # Ground heat flux (W m−2) ρa::FT, # Dry air density (kg m−3) - cp::FT, # Specific heat capacity of air (J kg−1 K−1) + cp::FT, # Specific heat capacity of air (J kg−1 K−1) VPD::FT, # vapor pressure deficit (Pa) ga::FT, # atmospheric conductance (m s−1) γ::FT, # Psychrometric constant (γ ≈ 66 Pa K−1) @@ -970,7 +970,7 @@ end Lv::FT, # Volumetric latent heat of vaporization (J m-3) ) where {FT} -Computes the evapotranspiration in m/s using the Penman-Monteith equation. +Computes the evapotranspiration in m/s using the Penman-Monteith equation. """ function penman_monteith( Δ::FT, @@ -995,11 +995,11 @@ end LAI::FT, # Leaf area index SAI::FT, RAI::FT, - ηsl::FT, # live stem wood coefficient (kg C m-3) + ηsl::FT, # live stem wood coefficient (kg C m-3) h::FT, # canopy height (m) σl::FT # Specific leaf density (kg C m-2 [leaf]) μr::FT, # Ratio root nitrogen to top leaf nitrogen (-), typical value 1.0 - μs::FT, # Ratio stem nitrogen to top leaf nitrogen (-), typical value 0.1 + μs::FT, # Ratio stem nitrogen to top leaf nitrogen (-), typical value 0.1 ) where {FT} Computes the nitrogen content of leafs (Nl), roots (Nr) and stems (Ns). @@ -1010,11 +1010,11 @@ function nitrogen_content( LAI::FT, # Leaf area index SAI::FT, RAI::FT, - ηsl::FT, # live stem wood coefficient (kg C m-3) + ηsl::FT, # live stem wood coefficient (kg C m-3) h::FT, # canopy height (m) σl::FT, # Specific leaf density (kg C m-2 [leaf]) μr::FT, # Ratio root nitrogen to top leaf nitrogen (-), typical value 1.0 - μs::FT, # Ratio stem nitrogen to top leaf nitrogen (-), typical value 0.1 + μs::FT, # Ratio stem nitrogen to top leaf nitrogen (-), typical value 0.1 ) where {FT} Sc = ηsl * h * LAI * ClimaLand.heaviside(SAI) Rc = σl * RAI @@ -1035,7 +1035,7 @@ end ) where {FT} Computes plant maintenance respiration as a function of dark respiration (Rd), -the nitrogen content of leafs (Nl), roots (Nr) and stems (Ns), +the nitrogen content of leafs (Nl), roots (Nr) and stems (Ns), and the soil moisture factor (β). """ function plant_respiration_maintenance(