Redmibook Pro 15 2023 Ryzen BIOS Reset, easy unbrick

[AntonIXO]

Using this tool, I changed the speed of my notebook's RAM from the vendor-defined 6400MB/s to 7000MB/s. After making this adjustment, the notebook's keyboard lit up for a few seconds and then rebooted. I initially believed that I would need to reflash the BIOS using a programmer. However, I discovered a simple solution on the 4pda forum. Here's how it goes:

1. Disconnect the charger.
2. Press and hold the power button until the right-side LED begins to flash red.
3. Immediately release the button and press it again.
4. Continue pressing the button until the flashing stops. At this point, you can release the button.
5. Start the notebook as usual with a single touch.

After following these steps, the BIOS was reset, and the notebook started up normally. This method worked for me, and it might be effective for other Redmi notebooks as well.