-
Notifications
You must be signed in to change notification settings - Fork 0
/
printer.cfg
75 lines (68 loc) · 2.68 KB
/
printer.cfg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
#[display_status]
#[pause_resume]
[include mainsail.cfg]
[gcode_macro _CLIENT_VARIABLE]
gcode:
variable_use_custom_pos : True ; use custom park coordinates for x,y [True/False]
variable_custom_park_x : 60 ; value must be within your defined min and max of X
variable_custom_park_y : 20 ; custom y position; value must be within your defined min and max of Y
variable_custom_park_dz : 15.0 ; custom dz value; the value in mm to lift the nozzle when move to park position
variable_speed_move : 100.0 ; move speed in mm/s
variable_user_cancel_macro: "M84"
#---------------------------------------------------------------------
### hardware configuration
[include /home/pi/printer_data/config/my_config/MCU/*]
### my macro
[include /home/pi/printer_data/config/my_config/MACRO/*]
[include /home/pi/printer_data/config/my_config/IDEX/*]
### configuration for LCD 12864
#[include /home/pi/printer_data/config/my_config/LCD/*]
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bltouch]
#*# z_offset = 0.710 # 0.610 , 0.560
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 75.475
#*# pid_ki = 0.695
#*# pid_kd = 2049.135
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 27.560
#*# pid_ki = 2.663
#*# pid_kd = 71.312
#*#
#*# [extruder1]
#*# control = pid
#*# pid_kp = 32.218
#*# pid_ki = 3.304
#*# pid_kd = 78.531
#*#
#*# [input_shaper]
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 0.342708, 0.316667, 0.336979, 0.387500, 0.393750, 0.392708, 0.374479, 0.388542, 0.380208, 0.309896
#*# 0.326042, 0.354688, 0.425521, 0.407813, 0.448958, 0.461458, 0.445833, 0.442188, 0.386979, 0.361458
#*# 0.327083, 0.385938, 0.456771, 0.445833, 0.484896, 0.446875, 0.475000, 0.476563, 0.450521, 0.393229
#*# 0.393750, 0.422396, 0.455208, 0.488021, 0.473438, 0.497396, 0.509896, 0.505729, 0.455208, 0.429688
#*# 0.313542, 0.382292, 0.409375, 0.463542, 0.495313, 0.502083, 0.510938, 0.538021, 0.516667, 0.469792
#*# 0.373438, 0.373958, 0.473438, 0.522396, 0.494792, 0.540625, 0.543229, 0.534896, 0.495313, 0.451563
#*# 0.321875, 0.394792, 0.449479, 0.456771, 0.488542, 0.515104, 0.516146, 0.520833, 0.484896, 0.452604
#*# 0.351563, 0.400521, 0.432292, 0.463021, 0.544271, 0.522396, 0.533333, 0.531771, 0.467708, 0.401563
#*# 0.338542, 0.398958, 0.414583, 0.484896, 0.514063, 0.551042, 0.527083, 0.527604, 0.470313, 0.348438
#*# 0.363542, 0.387500, 0.451563, 0.481250, 0.531250, 0.526042, 0.573438, 0.550000, 0.465104, 0.368750
#*# x_count = 10
#*# y_count = 10
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = -20.0
#*# max_x = 244.9
#*# min_y = 10.0
#*# max_y = 280.0