Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Unable to erase ATtiny402 #53

Closed
Frogieder opened this issue Nov 26, 2021 · 5 comments
Closed

Unable to erase ATtiny402 #53

Frogieder opened this issue Nov 26, 2021 · 5 comments

Comments

@Frogieder
Copy link

Frogieder commented Nov 26, 2021 •
edited
Loading

I tried to communicate with the ATtiny402 over UPDI, yet I couldn't. My chips are brand new, I bought them from a very reliable seller. The error message I got after I managed to get the programmer working seemed similar to the message I am supposed to get with a locked chip. I tried to unlock it by erasing it using -e flag or by using -F -t flags, yet none of them worked. I was stuck with the same error message. I am sure that my connections are right, I added a 10uF capacitor on my Arduino Uno to prevent it from resetting (which indeed works), I have copied the .conf file, and all the code I'm using is the most recent one I can get to. I am running everything on a Linux machine. There doesn't seem to be anything about this particular problem in other issues, not open nor closed, as far as I can tell. I'd really appreciate if you could look into this.
The outputs (both verbose and short) of my commands look like this:

$ avrdude -c jtag2updi -P /dev/ttyACM0 -p t402 -F -t

    avrdude: jtagmkII_initialize(): Cannot locate "flash" and "boot" memories in description
    avrdude: AVR device initialized and ready to accept instructions

    Reading |                                                    | 0% 0.00savrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE
    avrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE
    avrdude: jtagmkII_read_byte(): bad response to read memory command: RSP_ILLEGAL_MCU_STATE
    avr_read(): error reading address 0x0000
        read operation not supported for memory "signature"
    avrdude: error reading signature data for part "ATtiny402", rc=-2
    avrdude: error reading signature data, rc=-2
    avrdude: jtagmkII_program_disable(): bad response to leave progmode command: RSP_ILLEGAL_MCU_STATE

    avrdude done.  Thank you.`

$ avrdude -c jtag2updi -P /dev/ttyACM0 -p t402 -F -t -v -v -v -v

avrdude: Version 6.3-20171130
        Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
        Copyright (c) 2007-2014 Joerg Wunsch

        System wide configuration file is "/etc/avrdude.conf"
        User configuration file is "/home/martin/.avrduderc"
        User configuration file does not exist or is not a regular file, skipping

        Using Port                    : /dev/ttyACM0
        Using Programmer              : jtag2updi
avrdude: jtagmkII_open_pdi()
avrdude: jtagmkII_getsync()
avrdude: jtagmkII_getsync(): Sending sign-on command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Send: . [1b] . [00] . [00] . [01] . [00] . [00] . [00] . [0e] . [01] . [f3] . [97] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [1d] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [86] . [01] . [01] . [00] . [06] . [01] . [01] . [00] . [06] . [01] . [00] . [00] . [00] . [00] . [00] . [00] J [4a] T [54] A [41] G [47] I [49] C [43] E [45]   [20] m [6d] k [6b] I [49] I [49] . [00] 
avrdude: Recv: < [3c] 
avrdude: Recv: . [7f] 

avrdude: jtagmkII_recv(): Got message seqno 0 (command_sequence == 0)
avrdude: Recv: . [86] . [01] . [01] . [00] . [06] . [01] . [01] . [00] . [06] . [01] . [00] . [00] . [00] . [00] . [00] . [00] J [4a] T [54] A [41] G [47] I [49] C [43] E [45]   [20] m [6d] k [6b] I [49] I [49] . [00] 

Raw message:
0x86 0x01 0x01 0x00 0x06 0x01 0x01 0x00 0x06 0x01 0x00 0x00 0x00 0x00 0x00 0x00
0x4a 0x54 0x41 0x47 0x49 0x43 0x45 0x20 0x6d 0x6b 0x49 0x49 0x00 
Sign-on succeeded

JTAG ICE mkII sign-on message:
Communications protocol version: 1
M_MCU:
boot-loader FW version:        1
firmware version:              6.00
hardware version:              1
S_MCU:
boot-loader FW version:        1
firmware version:              6.00
hardware version:              1
Serial number:                   00:00:00:00:00:00
Device ID:                       JTAGICE mkII
avrdude: jtagmkII_getsync(): Using a 298-byte device descriptor
avrdude: jtagmkII_setparm()
avrdude: jtagmkII_setparm(): Sending set parameter command (parm 0x03, 1 bytes): 
avrdude: jtagmkII_send(): sending 3 bytes
avrdude: Send: . [1b] . [01] . [00] . [03] . [00] . [00] . [00] . [0e] . [02] . [03] . [06] $ [24] 1 [31] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [80] 
avrdude: Recv: . [cd] 
avrdude: Recv: . [83] 

avrdude: jtagmkII_recv(): Got message seqno 1 (command_sequence == 1)
avrdude: Recv: . [80] 

Raw message:
0x80 
OK

avrdude: jtagmkII_getsync(): Sending get sync command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Send: . [1b] . [02] . [00] . [01] . [00] . [00] . [00] . [0e] . [0f] . [e2] u [75] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [02] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [80] 
avrdude: Recv: . [1d] 
avrdude: Recv: . [09] 

avrdude: jtagmkII_recv(): Got message seqno 2 (command_sequence == 2)
avrdude: Recv: . [80] 

Raw message:
0x80 
OK

        AVR Part                      : ATtiny402
        Chip Erase delay              : 0 us
        PAGEL                         : P00
        BS2                           : P00
        RESET disposition             : dedicated
        RETRY pulse                   : SCK
        serial program mode           : yes
        parallel program mode         : yes
        Timeout                       : 0
        StabDelay                     : 0
        CmdexeDelay                   : 0
        SyncLoops                     : 0
        ByteDelay                     : 0
        PollIndex                     : 0
        PollValue                     : 0x00
        Memory Detail                 :

                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        prodsig        0     0     0    0 no         61   61      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuses          0     0     0    0 no          9    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse0          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse1          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse2          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse4          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse5          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse6          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse7          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        fuse8          0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        lock           0     0     0    0 no          1    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        data           0     0     0    0 no          0    0      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        usersig        0     0     0    0 no         32   32      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        flash          0     0     0    0 no       4096   64      0     0     0 0x00 0x00
                                Block Poll               Page                       Polled
        Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
        ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
        eeprom         0     0     0    0 no        128   32      0     0     0 0x00 0x00

        Programmer Type : JTAGMKII_PDI
        Description     : JTAGv2 to UPDI bridge
avrdude: jtagmkII_getparm()
avrdude: jtagmkII_getparm(): Sending get parameter command (parm 0x01): 
avrdude: jtagmkII_send(): sending 2 bytes
avrdude: Send: . [1b] . [03] . [00] . [02] . [00] . [00] . [00] . [0e] . [03] . [01] . [d3] . [99] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [03] 
avrdude: Recv: . [00] 
avrdude: Recv: . [03] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [81] . [01] . [01] 
avrdude: Recv: . [ed] 
avrdude: Recv: . [cd] 

avrdude: jtagmkII_recv(): Got message seqno 3 (command_sequence == 3)
avrdude: Recv: . [81] . [01] . [01] 

Raw message:
0x81 0x01 0x01 
parameter values:
0x01  0x01  

avrdude: jtagmkII_getparm()
avrdude: jtagmkII_getparm(): Sending get parameter command (parm 0x02): 
avrdude: jtagmkII_send(): sending 2 bytes
avrdude: Send: . [1b] . [04] . [00] . [02] . [00] . [00] . [00] . [0e] . [03] . [02] . [aa] B [42] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [04] 
avrdude: Recv: . [00] 
avrdude: Recv: . [05] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [81] . [00] . [06] . [00] . [06] 
avrdude: Recv: . [ca] 
avrdude: Recv: . [db] 

avrdude: jtagmkII_recv(): Got message seqno 4 (command_sequence == 4)
avrdude: Recv: . [81] . [00] . [06] . [00] . [06] 

Raw message:
0x81 0x00 0x06 0x00 0x06 
parameter values:
0x00  0x06  0x00  0x06  

        M_MCU hardware version: 1
        M_MCU firmware version: 6.00
        S_MCU hardware version: 1
        S_MCU firmware version: 6.00
        Serial number:          00:00:00:00:00:00
avrdude: jtagmkII_getparm()
avrdude: jtagmkII_getparm(): Sending get parameter command (parm 0x06): 
avrdude: jtagmkII_send(): sending 2 bytes
avrdude: Send: . [1b] . [05] . [00] . [02] . [00] . [00] . [00] . [0e] . [03] . [06] s [73] I [49] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [05] 
avrdude: Recv: . [00] 
avrdude: Recv: . [03] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [81] . [88] . [13] 
avrdude: Recv: x [78] 
avrdude: Recv: M [4d] 

avrdude: jtagmkII_recv(): Got message seqno 5 (command_sequence == 5)
avrdude: Recv: . [81] . [88] . [13] 

Raw message:
0x81 0x88 0x13 
parameter values:
0x88  0x13  

        Vtarget         : 5.0 V

avrdude: jtagmkII_initialize(): trying to set baudrate to 115200
avrdude: jtagmkII_setparm()
avrdude: jtagmkII_setparm(): Sending set parameter command (parm 0x05, 1 bytes): 
avrdude: jtagmkII_send(): sending 3 bytes
avrdude: Send: . [1b] . [06] . [00] . [03] . [00] . [00] . [00] . [0e] . [02] . [05] . [07] . [88] . [b0] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [06] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [80] 
avrdude: Recv: . [c3] 
avrdude: Recv: . [1f] 

avrdude: jtagmkII_recv(): Got message seqno 6 (command_sequence == 6)
avrdude: Recv: . [80] 

Raw message:
0x80 
OK

avrdude: jtagmkII_set_devdescr(): Sending set device descriptor command: 
avrdude: jtagmkII_send(): sending 299 bytes
avrdude: Send: . [1b] . [07] . [00] + [2b] . [01] . [00] . [00] . [0e] . [0c] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] @ [40] . [00]   [20] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [10] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] @ [40] . [00] . [00] . [00] . [00] . [00] . [00] . [01] . [02] . [00] . [00] . [00] . [00] . [00] . [00] . [00] . [00] ? [3f] W [57] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [07] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [80] 
avrdude: Recv: | [7c] 
avrdude: Recv: . [9e] 

avrdude: jtagmkII_recv(): Got message seqno 7 (command_sequence == 7)
avrdude: Recv: . [80] 

Raw message:
0x80 
OK

avrdude: jtagmkII_initialize(): Cannot locate "flash" and "boot" memories in description
avrdude: jtagmkII_reset(): Sending reset command: 
avrdude: jtagmkII_send(): sending 2 bytes
avrdude: Send: . [1b] . [08] . [00] . [02] . [00] . [00] . [00] . [0e] . [0b] . [01] . [de] . [fe] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [08] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [80] 
avrdude: Recv: . [ce] 
avrdude: Recv: / [2f] 

avrdude: jtagmkII_recv(): Got message seqno 8 (command_sequence == 8)
avrdude: Recv: . [80] 

Raw message:
0x80 
OK

avrdude: AVR device initialized and ready to accept instructions

Reading |                                                    | 0% 0.00savrdude: jtagmkII_read_byte(.., signature, 0x0, ...)
avrdude: jtagmkII_program_enable(): Sending enter progmode command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Send: . [1b] . [09] . [00] . [01] . [00] . [00] . [00] . [0e] . [14] . [dc] | [7c] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [09] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [a5] 
avrdude: Recv: . [de] 
avrdude: Recv: . [d8] 

avrdude: jtagmkII_recv(): Got message seqno 9 (command_sequence == 9)
avrdude: Recv: . [a5] 

Raw message:
0xa5 
Illegal MCU state

avrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE
avrdude: jtagmkII_program_enable(): Sending enter progmode command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Send: . [1b] . [0a] . [00] . [01] . [00] . [00] . [00] . [0e] . [14] . [0c] . [f6] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [0a] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [a5] 
avrdude: Recv: . [0e] 
avrdude: Recv: R [52] 

avrdude: jtagmkII_recv(): Got message seqno 10 (command_sequence == 10)
avrdude: Recv: . [a5] 

Raw message:
0xa5 
Illegal MCU state

avrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE
avrdude: jtagmkII_read_byte(): Sending read memory command: 
avrdude: jtagmkII_send(): sending 10 bytes
avrdude: Send: . [1b] . [0b] . [00] . [0a] . [00] . [00] . [00] . [0e] . [05] . [b4] . [01] . [00] . [00] . [00] . [00] . [11] . [00] . [00] . [1a] . [d4] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [0b] 
avrdude: Recv: . [00] 
avrdude: Recv: . [02] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [a5] . [01] 
avrdude: Recv: 6 [36] 
avrdude: Recv: . [1d] 

avrdude: jtagmkII_recv(): Got message seqno 11 (command_sequence == 11)
avrdude: Recv: . [a5] . [01] 

Raw message:
0xa5 0x01 
Illegal MCU state: Running

avrdude: jtagmkII_read_byte(): bad response to read memory command: RSP_ILLEGAL_MCU_STATE
avr_read(): error reading address 0x0000
    read operation not supported for memory "signature"
avrdude: error reading signature data for part "ATtiny402", rc=-2
avrdude: error reading signature data, rc=-2
avrdude: jtagmkII_program_disable(): Sending leave progmode command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Send: . [1b] . [0c] . [00] . [01] . [00] . [00] . [00] . [0e] . [15] 4 [34] . [fa] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [0c] 
avrdude: Recv: . [00] 
avrdude: Recv: . [02] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [a5] . [00] 
avrdude: Recv: ] [5d] 
avrdude: Recv: . [e5] 

avrdude: jtagmkII_recv(): Got message seqno 12 (command_sequence == 12)
avrdude: Recv: . [a5] . [00] 

Raw message:
0xa5 0x00 
Illegal MCU state: Stopped

avrdude: jtagmkII_program_disable(): bad response to leave progmode command: RSP_ILLEGAL_MCU_STATE
avrdude: jtagmkII_close()
avrdude: jtagmkII_close(): Sending GO command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Send: . [1b] . [0d] . [00] . [01] . [00] . [00] . [00] . [0e] . [08] . [ef] . [b0] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [0d] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [80] 
avrdude: Recv: . [af] 
avrdude: Recv: . [b8] 

avrdude: jtagmkII_recv(): Got message seqno 13 (command_sequence == 13)
avrdude: Recv: . [80] 

Raw message:
0x80 
OK

avrdude: jtagmkII_close(): Sending sign-off command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Send: . [1b] . [0e] . [00] . [01] . [00] . [00] . [00] . [0e] . [00] w [77] . [b6] 
avrdude: jtagmkII_recv():
avrdude: Recv: . [1b] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [00] 
avrdude: Recv: . [01] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [00] 
avrdude: Recv: . [0e] 
avrdude: Recv: . [80] 
avrdude: Recv: . [7f] 
avrdude: Recv: 2 [32] 

avrdude: jtagmkII_recv(): Got message seqno 14 (command_sequence == 14)
avrdude: Recv: . [80] 

Raw message:
0x80 
OK


avrdude done.  Thank you.
`
@voneiden
Copy link

#45 appears to have same symptom?

@Frogieder
Copy link
Author

Frogieder commented Nov 26, 2021 •
edited
Loading

Duplicate of #45

Yes, that issue really seems to reference the same problem

@voneiden
Copy link

Would #43 help? Worth trying?

@Frogieder
Copy link
Author

Unfortunately not, as I said, I tried both options -e and -t -F yet both of them gave me the same error

@Frogieder
Copy link
Author

Frogieder commented Nov 26, 2021 •
edited
Loading

Alright, a big update: I managed to get into the terminal mode. I hadn't uncommented a line in sys.h that I was supposed to. The same problem as in the issue you linked - I just didn't read anything. There is another error when I type in erase but there may be something I missed, so I'm going to do some research on my own again before I report a problem

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@voneiden @Frogieder