Creating and Running an Op Mode (OnBot Java)
This tutorial assumes that you have a sound understanding of the Java programming language. If you do not know Java, then you should consider using the FTC Blocks Programming Tool, which is a visual development tool. Information about the FTC Blocks Programming Tool can be found at the following link:
Or, you can learn the Java programming language by completing the Oracle Java Tutorial, which is available at the following address:
https://docs.oracle.com/javase/tutorial/
During a typical FIRST Tech Challenge match, a team’s robot must perform a variety of tasks to score points. For example, a team might want their robot to follow a white line on the competition floor and then score a game element into a goal autonomously during a match. Teams write programs called “op modes” (which stands for “operational modes”) to specify the behavior for their robot. These op modes run on the Robot Controller phone after being selected on the Driver Station phone.
Teams who are participating in the FIRST Tech Challenge have a variety of programming tools that they can use to create their own op modes. This document explains how to use the FTC OnBot Java Programming Tool to write an op mode for an FTC robot.
The FTC OnBot Java Programming Tool is a user-friendly programming tool that is served up by the Robot Controller phone. A user can create custom op modes for their robot using this tool and then save these op modes directly onto the Robot Controller. Users write their op modes using Java. The op modes are compiled very quickly on the Robot Controller and then loaded dynamically by the Robot Controller during run time.
The examples in this document use a Windows laptop computer to connect to the Robot Controller. This Windows laptop computer has a Javascript-enabled web browser installed that is used to access the FTC OnBot Java Programming Tool.
Note that the process used to create and edit an op mode is identical if you are using a Control Hub as your Robot Controller.
Note that if you prefer, you can use an alternate device, such as an Apple Mac laptop, Chromebook, or an iPad instead of a Windows computer to access the OnBot Java Programming Tool. The instructions included in this document, however, assume that you are using a Windows laptop.
Note that this section of the wiki assumes that you have already setup and configured your Android devices and robot hardware. It also assumes that you have successfully connected your laptop to the Progam & Manage server on the Robot Controller device.
If you connected your laptop successfully to the Program & Manage wireless network of the Robot Controller, then you are ready to create your first op mode. In this section, you will use the OnBot Java Programming Tool to create the program logic for your first op mode.
| Creating Your First Op Mode |
|---|
| 1. Launch the web browser on your laptop (FIRST recommends using Google Chrome) and find the web address that is displayed on the Program & Manage screen of the Robot Controller. Important Note: If your Robot Controller is an Android smartphone, then the address to access the Program & Manage server is "192.168.49.1:8080".
|
| 2. Verify that your web browser is connected to the programming mode server. If it is connected to the programming mode server successfully, the Robot Controller Console should be displayed.
|
| 3. Click on the word “OnBotJava” towards the top of the screen. This will switch the browser to OnBot Java Programming mode.
|
| 4. Take a look at the OnBot Java user interface. On the left hand side, there is the project browser pane. In the upper right hand corner, there is the source code editing pane. In the lower right hand corner, there is the message pane.
|
| 5. In the project browser pane, press the “+” symbol to create a new file. Pushing this button will launch the New File dialog box. This dialog box has several parameters that you can configure to customize your new file.
For this example, specify “MyFIRSTJavaOpMode” as the File Name in the New File dialog box. Using the Sample dropdown list control, select “BlankLinearOpMode” from the list of available sample op modes (see image above). By selecting “BlankLinearOpMode” the OnBot Java editor will automatically generate a basic LinearOpMode framework for you. Check the option labeled “TeleOp” to ensure that this new file will be configured as a tele-operated (i.e., driver controlled) op mode. Also, make sure you check the “Setup Code for Configured Hardware” option. If this option is enabled, the OnBot Java editor will look at the hardware configuration file for your Robot Controller and automatically generate the code that you will need to access the configured devices in your op mode. Press the “OK” button to create your new op mode. |
| 6. You should see your newly created op mode in the editing pane of the OnBot Java user interface.
|
Congratulations, you created your first op mode! The op mode currently does not do much, but you will eventually modify it to make it more useful.
Note that when you create an OnBot op mode, you create a .java file that is stored on the Robot Controller. You can access your saved op modes using the project browser on the left side of the screen. You can also organize your saved op modes by right mouse clicking on the project browser to display a list of options to create, edit or delete files and folders.
Also, note that the OnBot Java editor automatically saves your op mode as you are editing it, provided that you are connected to the Program & Manage server.
It can be helpful to think of an op mode as a list of tasks for the Robot Controller to perform. For a linear op mode, the Robot Controller will process this list of tasks sequentially. Users can also use control loops (such as a while loop) to have the Robot Controller repeat (or iterate) certain tasks within a linear op mode.
If you think about an op mode as a list of instructions for the robot, this set of instructions that you created will be executed by the robot whenever a team member selects the op mode called “MyFIRSTJavaOpMode” from the list of available op modes for this Robot Controller.
Let’s look at the structure of your newly created op mode. Here’s a copy of the op mode text (minus some comments, the package definition, and some import package statements):
@TeleOp
public class MyFIRSTJavaOpMode extends LinearOpMode {
private Gyroscope imu;
private DcMotor motorTest;
private DigitalChannel digitalTouch;
private DistanceSensor sensorColorRange;
private Servo servoTest;
@Override
public void runOpMode() {
imu = hardwareMap.get(Gyroscope.class, "imu");
motorTest = hardwareMap.get(DcMotor.class, "motorTest");
digitalTouch = hardwareMap.get(DigitalChannel.class, "digitalTouch");
sensorColorRange = hardwareMap.get(DistanceSensor.class, "sensorColorRange");
servoTest = hardwareMap.get(Servo.class, "servoTest");
telemetry.addData("Status", "Initialized");
telemetry.update();
// Wait for the game to start (driver presses PLAY)
waitForStart();
// run until the end of the match (driver presses STOP)
while (opModeIsActive()) {
telemetry.addData("Status", "Running");
telemetry.update();
}
}
}
At the start of the op mode there is an annotation that occurs before the class definition. This annotation states that this is a tele-operated (i.e., driver controlled) op mode:
@TeleOp
If you wanted to change this op mode to an autonomous op mode, you would replace the “@TeleOp” with an “@Autonomous” annotation instead.
You can see from the sample code that an op mode is defined as a Java class. In this example, the op mode name is called “MyFIRSTJavaOpMode” and it inherits characteristics from the LinearOpMode class.
public class MyFIRSTJavaOpMode extends LinearOpMode {
You can also see that the OnBot Java editor created five private member variables for this op mode. These variables will hold references to the five configured devices that the OnBot Java editor detected in the configuration file of your Robot Controller.
private Gyroscope imu;
private DcMotor motorTest;
private DigitalChannel digitalTouch;
private DistanceSensor sensorColorRange;
private Servo servoTest;
Next, there is an overridden method called runOpMode. Every op mode of type LinearOpMode must implement this method. This method gets called when a user selects and runs the op mode.
@Override
public void runOpMode() {
At the start of the runOpMode method, the op mode uses an object named hardwareMap to get references to the hardware devices that are listed in the Robot Controller’s configuration file:
imu = hardwareMap.get(Gyroscope.class, "imu");
motorTest = hardwareMap.get(DcMotor.class, "motorTest");
digitalTouch = hardwareMap.get(DigitalChannel.class, "digitalTouch");
sensorColorRange = hardwareMap.get(DistanceSensor.class, "sensorColorRange");
servoTest = hardwareMap.get(Servo.class, "servoTest");
The hardwareMap object is available to use in the runOpMode method. It is an object of type HardwareMap class.
Note that when you attempt to retrieve a reference to a specific device in your op mode, the name that you specify as the second argument of the HardwareMap.get method must match the name used to define the device in your configuration file. For example, if you created a configuration file that had a DC motor named “motorTest”, then you must use this same name (it is case sensitive) to retrieve this motor from the hardwareMap object. If the names do not match, the op mode will throw an exception indicating that it cannot find the device.
In the next few statements of the example, the op mode prompts the user to push the start button to continue. It uses another object that is available in the runOpMode method. This object is called telemetry and the op mode uses the addData method to add a message to be sent to the Driver Station. The op mode then calls the update method to send the message to the Driver Station. Then it calls the waitForStart method, to wait until the user pushes the start button on the driver station to begin the op mode run.
telemetry.addData("Status", "Initialized");
telemetry.update();
// Wait for the game to start (driver presses PLAY)
waitForStart();
Note that all linear op modes should have a waitForStart statement to ensure that the robot will not begin executing the op mode until the driver pushes the start button.
After a start command has been received, the op mode enters a while loop and keeps iterating in this loop until the op mode is no longer active (i.e., until the user pushes the stop button on the Driver Station):
// run until the end of the match (driver presses STOP)
while (opModeIsActive()) {
telemetry.addData("Status", "Running");
telemetry.update();
}
As the op mode iterates in the while loop, it will continue to send telemetry messages with the index of “Status” and the message of “Running” to be displayed on the Driver Station.
When you create or edit an op mode the OnBot Java editor will auto-save the .java file to the file system of the Robot Controller. However, before you can execute your changes on the Robot Controller, you must first build the op mode and convert it from a Java text file to a binary that can be loaded dynamically into the FTC Robot Controller app.
If you are satisfied with your op mode and are ready to build, press the Build button (which is the button with the wrench symbol, see image below) to start the build process. Note that the build process will build all of the .java files on your Robot Controller.
You should see messages appear in the message pane, which is located in the lower right hand side of the window. If your build was successful, you should see a “Build succeeded!” message in the message pane.
Once you have built the binary files with your updated op modes, they are ready to run on the Robot Controller. Before we run our example op mode, let’s see what happens if a problem occurs during the build process.
In the previous section, the build process went smoothly. Let’s modify your op mode slightly to cause an error in the build process.
In the editing pane of the OnBot Java window, look for the line that reads “private Servo servoTest;”. This should appear somewhere near the beginning of your op mode class definition. Change the word “Servo” to the word “Zervo”:
private Zervo servoTest;
Also, let’s modify the telemetry statement that informs the user that the op mode has been initialized, and let’s remove one of the two arguments so that the statement looks like this:
telemetry.addData("Status",);
Note that when you eliminate the second argument, a little “x” should appear next to the line with the modified addData statement. This “x” indicates that there is a syntax error in the statement.
After you have modified your op mode, you can press the build button and see what error messages appear.
When you first attempt to build the op mode, you should get an “illegal start of expression error”. This is because the addData method is missing its second argument. The OnBot Java system also directs you to the file that has the error, and the location within the file where the error occurs.
In this example, the problem file is called “org/firstinspires/ftc/teamcode/MyFIRSTJavaOpMode.java” and the error occurs at line 62, column 37. It is important to note that the build process builds all of the .java files on the Robot Controller. If there is an error in a different file (one that you are not currently editing) you will need to look at the file name to determine which file is causing the problem.
Let’s restore this statement back to its original, correct form:
telemetry.addData("Status", "Initialized");
After you have corrected the addData statement, push the build button again to see what happens. The OnBot Java system should complain that it cannot find the symbol “Zervo” in a source file called “org/firstinspires/ftc/teamcode/MyFIRSTJavaOpMode.java” at line 51, column 13.
You should restore the statement back to its original form and then push the build button and verify that the op mode gets built properly.
private Servo servoTest;
If you successfully rebuilt your op mode, you are ready to run the op mode. Verify that the Driver Station is still connected to the Robot Controller. Since you designated that your example op mode is a tele-operated op mode, it will be listed as a “TeleOp” op mode.
On the Driver Station, use the “TeleOp” dropdown list control to display the list of available op modes. Select your op mode (“MyFIRSTJavaOpMode”) from the list.
The op mode will execute the statements in the runOpMode method up to the waitForStart statement. It will then wait until you press the start button (which is represented by the triangular shaped symbol) to continue.
Once you press the start button, the op mode will continue to iterate and send the “Status: Running” message to the Driver Station. To stop the op mode, press the square-shaped stop button.
Congratulations! You ran your first java op mode!
Let’s modify your op mode to control the DC motor that you connected and configured for your REV Expansion Hub. Modify the code for the program loop so that it looks like the following:
// run until the end of the match (driver presses STOP)
double tgtPower = 0;
while (opModeIsActive()) {
tgtPower = -this.gamepad1.left_stick_y;
motorTest.setPower(tgtPower);
telemetry.addData("Target Power", tgtPower);
telemetry.addData("Motor Power", motorTest.getPower());
telemetry.addData("Status", "Running");
telemetry.update();
}
If you look at the code that was added, you will see that we defined a new variable called target power before we enter the while loop.
double tgtPower = 0;
At the start of the while loop we set the variable tgtPower equal to the negative value of the gamepad1’s left joystick:
tgtPower = -this.gamepad1.left_stick_y;
The object gamepad1 is available for you to access in the runOpMode method. It represents the state of gamepad #1 on your Driver Station. Note that for the F310 gamepads that are used during the competition, the Y value of a joystick ranges from -1, when a joystick is in its topmost position, to +1, when a joystick is in its bottommost position. In the example code above, you negate the left_stick_y value so that pushing the left joystick forward will result in a positive power being applied to the motor. Note that in this example, the notion of forwards and backwards for the motor is arbitrary. However, the concept of negating the joystick y value can be very useful in practice.
The next set of statements sets the power of motorTest to the value represented by the variable tgtPower. The values for target power and actual motor power are then added to the set of data that will be sent via the telemetry mechanism to the Driver Station.
tgtPower = -this.gamepad1.left_stick_y;
motorTest.setPower(tgtPower);
telemetry.addData("Target Power", tgtPower);
telemetry.addData("Motor Power", motorTest.getPower());
After you have modified your op mode to include these new statements, press the build button and verify that the op mode was built successfully.
Your op mode takes input from a gamepad and uses this input to control a DC motor. To run your op mode, you will need to connect a Logitech F310 gamepad to the Driver Station.
Before you connect your gamepad to the phone, verify that the switch on the bottom of the gamepad is set to the “X” position.
Connect the gamepad to the Driver Station using the Micro USB OTG adapter cable.
Your example op mode is looking for input from the gamepad designated as the user or driver #1. Press the Start button and the A button simultaneously on the Logictech F310 controller to designate your gamepad as user #1. Note that pushing the Start button and the B button simultaneously would designate the gamepad as user #2.
If you successfully designated the gamepad to be user #1, you should see a little gamepad icon above the text “User 1” in the upper right hand corner of the Driver Station Screen. Whenever there is activity on gamepad #1, the little icon should be highlighted in green. If the icon is missing or if it does not highlight in green when you use your gamepad, then there is a problem with the connection to the gamepad.
Select, initialize and run your “MyFIRSTJavaOpMode” op mode. It is important to note that whenever you rebuild an op mode, you must stop the current op mode run and then restart it before the changes that you just built take effect.
If you configured your gamepad properly, then the left joystick should control the motion of the motor. As you run your op mode, be careful and make sure you do not get anything caught in the turning motor. Note that the User #1 gamepad icon should highlight green each time you move the joystick. Also note that the target power and actual motor power values should be displayed in the telemetry area on the Driver Station.
-
TensorFlow 2023-2024