Skip to content

gix-path improperly resolves configuration path reported by Git

Moderate
Byron published GHSA-m8rp-vv92-46c7 Sep 6, 2024

Package

cargo gix-path (Rust)

Affected versions

< 0.10.11

Patched versions

>= 0.10.11

Description

Summary

gix-path runs git to find the path of a configuration file associated with the git installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution.

Details

In gix_path::env, the underlying implementation of the installation_config and installation_config_prefix functions calls git config -l --show-origin to find the path of a file to treat as belonging to the git installation.

Affected versions of gix-path do not pass -z/--null to cause git to report literal paths (650a1b5). Instead, to cover the occasional case that git outputs a quoted path, they attempt to parse the path by stripping the quotation marks:

https://github.com/Byron/gitoxide/blob/1cfe577d461293879e91538dbc4bbfe01722e1e8/gix-path/src/env/git/mod.rs#L138-L142

The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original.

This is not limited to paths with unusual characters such as quotation marks or newlines. Unless git is explicitly configured with core.quotePath set to false, it also happens when the path contains most non-ASCII characters, including accented or non-English letters. For example, é is transformed to \303\251, with literal backslashes. (This is an octal representation of the bytes in its UTF-8 encoding. This behavior is not limited to systems that encode paths with UTF-8 on disk.)

Rarely, the configuration file gix-path wrongly attempts to open can be created by an attacker who has a limited user account on the system. The attacker would often need to request an account username tailored to carrying out the attack.

PoC

Quick demonstration on Unix

On a Unix-like system in which Git supports no higher scope than system for configuration variables (i.e., not on macOS with Apple Git), in a locale that supports UTF-8, with gitoxide installed, run:

mkdir myrepo
cd myrepo
git init
printf '[real]\n\trealvar = realval\n' > 'é'
printf '[fake]\n\tfakevar = fakeval\n' > '\303\251'
GIT_CONFIG_SYSTEM='é' gix config

If the above conditions are satisfied and the gix command was built against an affected version of gix-path, then the last command's output looks something like this:

# From '\303\251' (GitInstallation)
[fake]
        fakevar = fakeval

# From 'é' (System)
[real]
        realvar = realval

# From '/home/ubuntu/.gitconfig' (User)
[init]
        defaultBranch = main

# From './.git/config' (Local)
[core]
        repositoryformatversion = 0
        filemode = true
        bare = false
        logallrefupdates = true

Demonstration across user accounts on Windows

On a test system running Windows on which Git for Windows is not installed system-wide—resembling a scenario in which users who wish to use Git are expected to install it themselves for their accounts—create two accounts, with these usernames:

  • Renée, the target of the attack. This user may be a limited user or an administrator. Its user profile directory is assumed to be C:\Users\Renée.
  • Ren, the user who carries out the attack. This user should be a limited user, since an administrator would not need to exploit this vulnerability to inject configuration. Its user profile directory is assumed to be C:\Users\Ren.

As Ren, run these commands in PowerShell:

$d = "$HOME\303\251e\AppData\Local\Programs\Git\etc"
mkdir $d
git config --file $d\gitconfig core.sshCommand calc.exe
icacls $HOME\303 /grant 'Renée:(RX)' /T

(The gitconfig file can instead be written manually, in which case Ren need not have git.)

As Renée:

  1. Install Git for Windows in the default location for non-systemwide installations, which for that user account is inside C:\Users\Renée\AppData\Local\Programs. For a non-administrative installation, Git for Windows will pick this location automatically. Allow the installer to place the directory containing git in the user's PATH, as it does by default.

    (The scenario can be modified for any location the attacker can predict. So, for example, Renée can install Git for Windows with scoop, and Ren could carry out the attack with correspondingly modified path components in place of AppData\Local\Programs\Git.)

  2. Install gitoxide using any common technique, such as by installing Rust and then running cargo install gitoxide.

  3. Open a PowerShell window and run a gix command that attempts to run the SSH client for transport. For example:

    gix clone ssh://localhost/myrepo.git

    At least one, and usually two, instances of the Windows calculator will pop up. This happens because calc.exe was configured in the fake configuration file the user Ren was able to cause to be used, by placing it at the location gix-path wrongly resolved the path of Renée's own configuration file to.

The gitconfig file written by the attacker can be adjusted with an arbitrary choice of payload, or to set other configuration variables.

Impact

On a single-user system, it is not possible to exploit this, unless GIT_CONFIG_SYSTEM and GIT_CONFIG_GLOBAL have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected.

Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. It is especially unlikely with Apple Git on macOS, due to its very high scoped configuration in /Library or /Applications that would be detected instead, as in CVE-2024-45305.

The likelihood of exploitation may be higher on Windows, where attacks such as those shown in the Windows proof-of-concept above can be performed due to the status of \ as a directory separator, and where there is no restriction on usernames containing accented or non-English letters (though the latter is also permitted on some other systems). Even then, complex user interaction is required. In most cases, a system administrator would have to approve an innocuous-seeming username, and then the targeted user (who could be the same or a different user) would have to use an application that uses gix-path.

In general, exploitation is more likely to succeed if at least one of the following applies:

  • Users are expected to install git themselves, and are likely to do so in predictable locations.
  • Locations where git is installed, whether due to usernames in their paths or otherwise, contain characters that git quotes by default in paths, such as non-English letters and accented letters.
  • A custom system-scope configuration file is specified with the GIT_CONFIG_SYSTEM environment variable, and its path is in an unusual location or has strangely named components.
  • A system-scope configuration file is absent, empty, or suppressed by means other than GIT_CONFIG_NOSYSTEM. Currently, gix-path can treat a global-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where git is installed system-wide in an ordinary way.

However, exploitation is expected to be very difficult even under any combination of those factors.

Although the effect here is similar to CVE-2022-24765 once exploited, a greater degree of user interaction would usually be required, and the attack complexity here is much higher because the necessary conditions are uncommon and challenging to predict.

Severity

Moderate

CVSS overall score

This score calculates overall vulnerability severity from 0 to 10 and is based on the Common Vulnerability Scoring System (CVSS).
/ 10

CVSS v3 base metrics

Attack vector
Local
Attack complexity
High
Privileges required
Low
User interaction
Required
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
None

CVSS v3 base metrics

Attack vector: More severe the more the remote (logically and physically) an attacker can be in order to exploit the vulnerability.
Attack complexity: More severe for the least complex attacks.
Privileges required: More severe if no privileges are required.
User interaction: More severe when no user interaction is required.
Scope: More severe when a scope change occurs, e.g. one vulnerable component impacts resources in components beyond its security scope.
Confidentiality: More severe when loss of data confidentiality is highest, measuring the level of data access available to an unauthorized user.
Integrity: More severe when loss of data integrity is the highest, measuring the consequence of data modification possible by an unauthorized user.
Availability: More severe when the loss of impacted component availability is highest.
CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:N

CVE ID

CVE-2024-45405

Credits