Skip to content

Latest commit

 

History

History
146 lines (97 loc) · 3.49 KB

README.md

File metadata and controls

146 lines (97 loc) · 3.49 KB
Raw

Configuration

Configuration of the device is done using the console

MQTT

Using the console

Test mqtt

mosquitto_sub -h "mqtt.beemos.org" -t "test/esp"

mosquitto_pub -h 'mqtt.beemos.org' -m "123412341234 " -t "test/esp"

Testing bidirectional communication

MQTT log publish topic: lpatiny/Beemos/hive1 MQTT publish topic: lpatiny/Beemos/hive1/a MQTT subscribe topic: lpatiny/Beemos/hive1/q

mosquitto_sub -h "mqtt.beemos.org" -t "lpatiny/Beemos/hive1/a/+"

mosquitto_pub -h 'mqtt.beemos.org' -m "h" -t "lpatiny/Beemos/hive1/q"

Topic

lpatiny/Beemos/hive1

Device information

uq allows to setup the device information. This is a numeric number between 66*256+65 and 66*256+90 (16961 to 16986).

Logging

  • index - 4 bytes
  • epoch - 4 bytes
  • 26 parameters * 2
  • event - 2 bytes
  • eventParameters - 2 bytes

1024 * 1024 bytes for log 16384 logs entries

Install platform IO cli

export PATH=$PATH:~/.platformio/penv/bin

printf("Restarting now.\n");
fflush(stdout);
esp_restart();

IDF_PATH=~/.platformio/packages/framework-espidf/

You may have to add pyserial: sudo pip3 install pyserial

Read device info: python3 $IDF_PATH/components/esptool_py/esptool/esptool.py --port /dev/cu.usbserial-A5XK3RJT flash_id

Read partition table

python3 $IDF_PATH/components/esptool_py/esptool/esptool.py --port /dev/cu.usbserial-A5XK3RJT read_flash 0x8000 0xc00 ptable.img

We can now check the content of the ptable.img file python3 $IDF_PATH/components/partition_table/gen_esp32part.py ptable.img

Here is an example of the result:

# Espressif ESP32 Partition Table
# Name, Type, SubType, Offset, Size, Flags
nvs,data,nvs,0x9000,20K,
otadata,data,ota,0xe000,8K,
app0,app,ota_0,0x10000,1280K,
app1,app,ota_1,0x150000,1280K,
spiffs,data,spiffs,0x290000,1472K,

FS

Create a folder at the first level called data.

To upload the data

pio run --target uploadfs

Alternative web server

https://github.com/me-no-dev/ESPAsyncWebServer#using-platformio

OTA

pio run -t upload --upload-port square.local pio run -t uploadfs --upload-port square.local

Test webserver

npm i --global loadtest
loadtest -n 1000 -c 4 http://square.patiny.com/command/A

Setup

BZ: Layout model CA: 0 (RGB), 1 (BRG) CB: bit 0: day, bit 1: night CC: Allows to turn on before or after sunset (in minutes) CD: Allows to turn off before or after sunrise (in minutes) CE: Minute event. <0 no action, minutes + intensity (0 to 15) _ 2000 CF: Minute event. <0 no action, minutes + intensity (0 to 15) _ 2000 CG: Minute event. <0 no action, minutes + intensity (0 to 15) _ 2000 CH: Minute event. <0 no action, minutes + intensity (0 to 15) _ 2000

CC-30: 30 minutes before sunset CD30: 30 minutes after sunrise

CE: 6022+20002 = 5320 at 10PM reduce the intensity to 2 CF: 607+200015 = 30420 at 7AM intensity to max (15)

CE5320,30420,-1,-1

Full power in the evening but reduce at 10PM and turn off at 12PM Turn on in the morning at 5AM but not too strong CB2,-30,30,30960,3320,0,2300

  • 30960: at 16h we set brightness to max (15)
  • 3320: at 22h we set brightness to 4
  • 0: at 0h we set brightness to 0
  • 2300: at 5h we set brightness to 4

Christmas

We don't use sunrise / sunset but fixed time

  • 30960: at 16h we set brightness to max (15)
  • 11080: at 18h we set brightness to 5
  • 3320: at 22h we set brightness to 1
  • 0: at 0h we set brightness to 0
  • 2300: at 5h we set brightness to 1
  • 10420: at 7h we set brightness to 5
  • 540: at 9h we set brightness to 0

CB3,0,0,30960,11080,3320,0,2300,10420,540