---
title: AGB Disassembly Guide
slug: eHkw-agb-disassembly-guide
description: "Learn how to disassemble your AGB model Game Boy Advance with this comprehensive guide. Discover the essential tools you'll need, including J1 and Y1 screwdrivers, plastic spudger tool, and tweezers. Follow our step-by-step instructions to safely remove
createdAt: Mon Feb 07 2022 05:47:05 GMT+0000 (Coordinated Universal Time)
updatedAt: Tue Dec 05 2023 19:55:42 GMT+0000 (Coordinated Universal Time)
---
https://www.youtube.com/watch?v=a20iz4WjBVA
In this guide we'll show you how to disassemble your AGB model Game Boy Advance.
:::hint{type="info"} Hand Held Legend earns commissions for Amazon purchases made through links in this post. :::
-
J1 (Japanese Industrial Standard) screwdriver
-
Y1 Tri-point screwdriver
-
Plastic spudger tool
-
Tweezers
-
J0 screwdriver
Turn the Game Boy over so the battery cover is facing up. Remove the battery cover and any batteries.
Use your Y1 screwdriver to remove the 6 screws marked in red. Remove the black screw in the battery compartment **marked in blue **using the J1 screwdriver.
Separate the rear shell from the front half of the console.
Remove the 4 J0 screws holding the cartridge shield in place. The shield lifts away easily.
Using your tweezers, poke into the gap shown in the diagram to release the battery tab. It may fall out or require pulling from the inside of the battery compartment.
Use a plastic spudger tool or your fingernail to release the plastic bale holding the LCD ribbon cable in place. At this point we are only unlatching the cable, leave it plugged in for now.
Remove the 3 J1 screws marked below holding the main board in place.
Take this opportunity to remove the shoulder buttons as well as the side grips. They will lift out without any resistance.
Lift the main board from the front of the console. Removing the main board from bottom to top will allow easier removal of the LCD ribbon cable.
You now have access to remove the silicone membranes, buttons, and power LED diffuser.
Gently twist the front plastic housing. This will help free up the LCD from the front housing. At this point, the LCD should easily lift up and away.
To remove the plastic screen lens, press firmly from the inside of the console. If you would like to re-use the plastic lens, utilize a microfiber cloth to apply pressure.
To reassemble your console, simply follow these instructions in reverse.
