README.md

Shield:

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Donations / Spenden

If somebody wants to support me for upcoming projects :)

• PayPal:
• Amazon Giftcard: https://www.amazon.de/Amazon-Gutschein-per-E-Mail-Amazon/dp/B0054PDOV8 - stefan.riese@me.com

WLED All-in-one ESP32 Controller

This board is designed to connect addressable LEDs/Neopixel strips and handle them with the WLED firmware. Other firmware can be used as well.

Features

• ESP32-WROOM-32E
• 5,5mm / 2,1mm barrel jack connector for input voltage
• 2 output lines for LED data and LED clock or relais
• level shifter for both outputs (3.3V -> 5V )
• resistor for data line
• support for LED strips with clock signal
• connector to flash firmware with CP2104 (3.3V, TX, RX, GND, IO0, GND)
• ❗ Maximum 5A ❗
• connector for digital input (3.3V, GND, IO4) (IR remote control for example)
• connector for addon shields (GND, IO32, IO15, IO14, 3.3V, GND, SENSOR_VP)

BOM

• 1 x WLED All-in-one ESP32 Controller presoldered from https://jlcpcb.com/

Comment	Designator	Footprint	LCSC
2.7K	R4	R_0603_1608Metric	C13167
100nF	C5,C6,C7	C_0603_1608Metric	C14663
47µF	C3	C_0805_2012Metric	C16780
10µF	C2,C4	C_0603_1608Metric	C19702
330	R5	R_0603_1608Metric	C23138
1000µF	C1	CP_Elec_10x10	C249474
10K	R1,R2,R3	R_0603_1608Metric	C25804
AMS1117-3.3	U1	SOT-89-3	C347256
TXS0102DCU	U3	VSSOP-8_2.3x2mm_P0.5mm	C53434
ESP32-WROOM-32	U2	ESP32-WROOM-32	C701342
LED	D1	LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder	C84256
Barrel_Jack	J2	BarrelJack_Horizontal
Screw_Terminal_01x04	J3	TerminalBlock_bornier-4_P5.08mm
Conn_01x03_Female	J4	PinHeader_1x03_P2.54mm_Vertical
Conn_01x07_Female	J1	PinHeader_1x07_P2.54mm_Vertical
Conn_01x07_Female	J5	PinHeader_1x07_P2.54mm_Vertical

• 2 x 2-pin screw terminal (https://www.amazon.de/gp/product/B08JB6SSCJ)
• 1 x Barrel Jack Adapter DS-210 (5,5mm / 2,1mm) (https://www.ebay.de/itm/182379482999)

Wiring diagram

• https://github.com/Hasenpups/WLED_All-in-one_ESP32_Controller/blob/main/WLED_All-in-one_ESP32_Controller.pdf

Software

• WLED: https://github.com/Aircoookie/WLED
• Sound reactive WLED: https://github.com/atuline/WLED

How to flash software

• Connect IO0 to GND
• Connect USB-UART bridge to 3.3V, TX, RX and GND
  • https://de.aliexpress.com/item/1005002689033373.html
  • https://www.makershop.de/module/kommunikation-module/micro-usb-uart-ttl/
• Open https://install.wled.me/
• Click "Install"
• Select COM port of USB-UART bridge
• Wait until finished

WLED configuration

• OUT1 - IO16
• OUT2 - IO17
• IR receiver - IO18
• Digital microphone (SCK - IO14, WS - IO15, SD - IO32)
• Analog microphone (ADC - SENSOR_VP)
• Button input - IO26

Addon shields

The following addon shields are available

Microphone input

• connector for digital and analog microphones
• INMP401
• MAX4466
• MAX9814

Prototype area

Cube builder

• 6 JST-PH connectors to add LED matrix panels to build a cube

Case

https://www.printables.com/model/373138-wled-all-in-one-esp32-controller-housing