Skip to content

Latest commit

 

History

History
48 lines (24 loc) · 1.48 KB

README.md

File metadata and controls

48 lines (24 loc) · 1.48 KB
Raw

PSoC6 port

This port is intended to run on Infineon PSoC™ 6 microcontrollers.

Pre-requisites

The following port is using Infineon ModusToolbox™ to resolve the specific PSoC™ board resources and building flags. Before working with micropython:

  1. Install ModusToolbox. Minimum version required is 3.0.

  2. Run the following script from MicroPython repository root to add the required tools to the system PATH, and install the udev rules:

    source tools/psoc6/dev-setup.sh && toolchain_setup

If the ModusToolbox™ has not been installed in the default path (~/ModusToolbox), add the path as positional argument of the toolchain_setup function:

source tools/psoc6/dev-setup.sh && toolchain_setup [mtb_path]

Building and running Linux version

As we are working on the ports-psoc6-main branch (for now), first checkout that branch after cloning this repo:

git checkout --track origin/ports-psoc6-main

Then initialize the ModusToolbox™ environment:

make mtb_init BOARD=<board-name>

Retrieve submodules:

make submodules

Build the firmware:

make

To build and program the device:

make program

Find more information about the available makefile targets:

make help

Run micropython

Use any serial terminal (putty, minicom..) and establish a session with your device with 115200 bauds and 8-N-1 configuration.