README

This README file contains information on the contents of the
fsl-di layer.

Please see the corresponding sections below for details.


Dependencies
============

This layer depends on:

  URI: git://git.openembedded.org/bitbake
  branch: master

  URI: git://git.openembedded.org/openembedded-core
  layers: meta
  branch: master

  URI: https://github.com/Freescale/meta-fsl-arm
  branch: fido

Patches
=======

Maintainer: Ivan Sergio Borgonovo <mail@webthatworks.it>
URI: https://github.com/Ivan-SB/meta-fsl-di.git

Table of Contents
=================

  I. Adding the fsl-di layer to your build
 II. Misc


I. Adding the fsl-di layer to your build
=================================================

Assuming the fsl-di layer exists at the top-level of your
yocto build tree, you can add it to the build system by adding the
location of the fsl-di layer to bblayers.conf, along with any
other layers needed. e.g.:

  BBLAYERS ?= " \
    /path/to/yocto/meta \
    /path/to/yocto/meta-yocto \
    /path/to/yocto/meta-openembedded/meta-oe \
    /path/to/yocto/meta-openembedded/meta-multimedia \
    /path/to/yocto/meta-fsl-arm \
    /path/to/yocto/meta-fsl-di \
    "


II. Misc
========
This layer provide kernel 4.1 support for
http://www.itrontft.com/NewWeb/tft/overview/overview.asp

This layer just support the 4.3" display board. It shouldn't be
hard to add support for the other displays.
As well some of the pin could be reconfigured to support other
configuration provided by the manufacturer.