O.G. AUTO-RECON

Features

• The purpose of O.G. Auto-Recon is to automate the initial information gathering phase and then enumerate based off those results as much as possible.
• This tool is intended for CTF's and can be fairly noisy. (Not the most stealth conscious tool...)
• Command syntax can be easily modified in the Config settings. $variable names should remain unchanged.
• If Virtual Host Routing is detected, O.G. Auto-Recon will add the host names to your /etc/hosts file and continue to enumerate the newly discovered host names.
• DNS enumeration is nerfed to ignore .com .co .eu .uk domains etc... since this tool was designed for CTF's like for instance, "hack the box". It will try to find most .htb domains if dns server's are detected..
• This project use's various stand-alone & custom tools to enumerate a target based off nmap results.
• All Commands and output are logged to a Report folder in the users ~/.local/share/autorecon/report directory using the naming context, "report/IP-ADDRESS/" which will look something like, report/10.10.10.108/ with a directory tree structure similar to this report tree structure

INSTALLATION

• Virtual Environment is the preferred method of installation

mkdir -p ~/pyenv
python3 -m pip install virtualenv
virtualenv -p python3 ~/pyenv/autorecon

cd /opt
git clone https://github.com/Knowledge-Wisdom-Understanding/recon.git
cd recon
chmod +x setup.sh
./setup.sh
source ~/pyenv/autorecon/bin/activate
python3 -m pip install -r requirements.txt
python3 setup.py install

Usage

       _____________          ____    ________________
      /___/___      \        /  / |  /___/__          \      Mr.P-Millz   _____
      O.G./  /   _   \______/__/  |______|__|_____ *   \_________________/__/  |___
       __/__/   /_\   \ |  |  \   __\/  _ \|  |       __/ __ \_/ ___\/  _ \|       |
      |   |     ___    \|  |  /|  | (  |_| )  |    |   \  ___/\  \__(  |_| )   |   |
      |___|____/\__\____|____/_|__|\_\____/|__|____|_  /\___  |\___  \____/|___|  /
      github.com/Knowledge-Wisdom-Understanding  \___\/  \__\/  \__\_/      \___\/ v4.2.0


usage:  autorecon -t 10.10.10.10

An Information Gathering and Enumeration Framework

optional arguments:
  -h, --help            show this help message and exit
  -t TARGET, --target TARGET
                        Single IPv4 Target to Scan
  -F, --FUZZ            auto fuzz found urls ending with .php for params
  -v, --version         Show Current Version
  -f FILE, --file FILE  File of IPv4 Targets to Scan
  -w [WEB], --web [WEB]
                        Get open ports for IPv4 address, then only Enumerate
                        Web & and Dns Services. -t,--target must be specified.
                        -w, --web takes a URL as an argument. i.e. python3
                        recon.py -t 10.10.10.10 -w secret
  -i {http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} [{http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} ...], --ignore {http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} [{http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} ...]
                        Service modules to ignore during scan.
  -s {http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} [{http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} ...], --service {http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} [{http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,removecolor,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm} ...]
                        Scan only specified service modules
  -b {ftp,smb,http,ssh}, --brute {ftp,smb,http,ssh}
                        Experimental! - Brute Force ssh,smb,ftp, or http. -t,
                        --target is REQUIRED. Must supply only one protocol at
                        a time. For ssh, first valid users will be enumerated
                        before password brute is initiated, when no user or
                        passwords are supplied as options.
  -p PORT, --port PORT  port for brute forcing argument. If no port specified,
                        default port will be used
  -u USER, --user USER  Single user name for brute forcing, for SSH, if no
                        user specified, will default to
                        wordlists/usernames.txt and bruteforce usernames
  -U USERS, --USERS USERS
                        List of usernames to try for brute forcing. Not yet
                        implimented
  -P PASSWORDS, --PASSWORDS PASSWORDS
                        List of passwords to try. Optional for SSH, By default
                        wordlists/probable-v2-top1575.txt will be used.

To scan a single target and enumerate based off of nmap results:

autorecon -t 10.10.10.10

To Enumerate Web with larger wordlists

• If you don't want to specify a directory , you can just enter ' ' as the argument for --web

autorecon -t 10.10.10.10 -w secret
autorecon -t 10.10.10.10 -w somedirectory
autorecon -t 10.10.10.10 -w ' '

Typically, on your first run, you should only specify the -t --target option (autorecon -t 10.10.10.10) Before you can use the -s --service option to specify specific modules, you must have already ran the topports module. For instance, if you really wanted to skip all other modules on your first run, and only scan the web after topports, you could do something like,

autorecon -t 10.10.10.10 -s topports dns http httpcms ssl sslcms sort_urls aquatone source

Or skip web enumeration all together but scan everything else.

autorecon -t 10.10.10.10 -i dns http httpcms ssl sslcms sort_urls aquatone source

The remaining services module is also dependent on the topports and or fulltcp module. Now you can skip doing a fulltcp scan if the target is slow. However, be advised, The UDP nmap scan is bundled with the fulltcp module currently, so skipping fulltcp module will result in missing some udp enumeration.

To Scan + Enumerate all IPv4 addr's in ips.txt file

autorecon -f ips.txt

To Fuzz all found php urls for parameters, you can use the -F --FUZZ flag with no argument.

autorecon -t 10.10.10.10 --FUZZ

Brute force ssh users on default port 22 If unique valid users found, brute force passwords

autorecon -t 10.10.10.10 -b ssh

Same as above but for ssh on port 2222 etc...

autorecon -t 10.10.10.10 -b ssh -p 2222
autorecon -t 10.10.10.10 -b ssh -p 2222 -u slickrick

To ignore certain services from being scanned you can specify the -i , --ignore flag.
When specifying multiple services to ignore, services MUST be space delimited. Only ignore topports if you have already ran this module as most other modules are dependent on nmap's initial top ports output. All the available modules are as follows:

http,httpcms,ssl,sslcms,aquatone,smb,dns,ldap,oracle,source,sort_urls,proxy,proxycms,fulltcp,topports,remaining,searchsploit,peaceout,ftpAnonDL,winrm

autorecon -t 10.10.10.10 -i http
autorecon -t 10.10.10.10 -i http ssl
autorecon --target 10.10.10.10 --ignore fulltcp http

You can also specify services that you wish to only scan, similar to the --ignore option, the -s, --service option will only scan the service specified. Please note that before you can use the -s, --service option, You must have already ran the topports nmap scan as most modules are dependent on nmap's output.

autorecon -t 10.10.10.10 -s topports remaining

autorecon -t 10.10.10.10 -s http httpcms
autorecon -t 10.10.10.10 --service oracle

Important

• MAKE SURE TO CHECK OUT THE Config file for all your customization needs
• All required non-default kali linux dependencies are included in setup.sh.

Demo

Recon	Brute

This program is intended to be used in kali linux. If you notice a bug or have a feature request. Please create an issue or submit a pull request. Thanks!

Disclaimer

Usage of recon.py for testing or exploiting websites without prior mutual consistency can be considered as an illegal activity. This tool is intended for CTF machines only. It is the final user's responsibility to obey all applicable local, state and federal laws. Authors assume no liability and are not responsible for any misuse or damage caused by this program.