Inmax 07505L keypad device recognize as TS0601 ( _TZE200_nyvavzbj )

[max3163]

Hi,

I've just bought a keypad device and I've checked on the z2m device list before, it's the Immax NEO 07505L ( https://www.zigbee2mqtt.io/devices/07505L.html ) :

But when I pair it, the device is not correctly recognize :
Nom simplifié : 0xa4c138d49591d92d
Description :
Vu pour la dernière fois : 27 seconds ago
Disponibilité Hors ligne
Type d'appareil EndDevice
Modèle Zigbee : TS0601
Constructeur Zigbee : _TZE200_nyvavzbj
Supporté : Not supported

I need to follow this link https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html ? or it's an other issue ?

Thanks in advance.

[Koenkk]

Could you check if the issue is fixed with the following external converter: https://gist.github.com/Koenkk/e2bf5af031abc883288895496bb65e4b

• save this as file next to configuration.yaml as ext_converter.js
• add it to configuration.yaml:

external_converters:
  - ext_converter.js

• start z2m, check if issue is fixed

[max3163]

Sorry for late response !

Yes it work !!! Thanks for help :)

[Koenkk]

Great, integrated the changes, you can remove the external converter after updating to the next release.

[gerardag]

Hi,

I followed the previous steps and worked fine, but when I started to watch what exposes, the action value when I press the arm away, arm home or disarm is an empty string:

Although when I check the logs for z2m I see the action, but HA doesn't notice the event:

May I do something wrong?

Thanks in advance :)

[max3163]

It's the same for me, but I use domoticz and switch send off event on each action and I can handle it...

[gerardag]

Oops :(

I'm using mqtt response message to automate arm/disarm actions.

Thanks for your response :)

[OmegaModr]

Had the same issue, the external converter works, the state on the z2m console shows up just as "Empty string("")" but MQTT messages are sent as they should be.

The one quirk it has is it sends an empty state right after that.

For reference

But if you define the state of the trigger in hass it works as expected. Just the current state is replaced by and empty string.

[besiktas97]

Is it maybe possible to also get the battery information for this device ? I am also using the external converter and it works good. Can do my stuff with it but have no battery info :(