Powered devices (TS011F plug) reporting very often and cannot change it

[RafWal1969]

Hi,

Not sure what the heck has happened.
Koordynator SLZB-06. Upgraded Zigbee Stack to 20240710.
Also upgraded zigbee2mqtt to 1.42.0 commit: 861cba6.
After that I have noticed that I have a lot of messages coming from devices which are powered - example of the plug with power monitoring. I have 7 of them, of different types (Elivco LSPA9, Tuya TS011F_plug_3, Tuya TS0121_plug) all of them behaving in the same way - reporting every few seconds. Other devices are also reporting way too often (i.e. wall switch Tuya TS0002_limited).

Info 2024-12-14 01:29:58z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/socket_02', payload '{"child_lock":"UNLOCK","current":0.06,"energy":10.97,"indicator_mode":"off/on","last_seen":"2024-12-14T00:29:58.448Z","linkquality":43,"power":7,"power_outage_memory":"restore","state":"ON","update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":243}'

Info 2024-12-14 01:30:00z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/socket_01', payload '{"current":0,"energy":28.63,"indicator_mode":"off/on","last_seen":"2024-12-14T00:30:00.372Z","linkquality":61,"power":0,"power_outage_memory":"restore","state":"OFF","voltage":233}'

Info 2024-12-14 01:30:00z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/socket_03', payload '{"child_lock":"UNLOCK","current":0,"energy":14.54,"indicator_mode":"off/on","last_seen":"2024-12-14T00:30:00.723Z","linkquality":91,"power":0,"power_outage_memory":"off","state":"OFF","update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":242}'

Info 2024-12-14 01:30:01z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/socket_04', payload '{"child_lock":null,"current":0,"energy":5.92,"indicator_mode":null,"last_seen":"2024-12-14T00:30:01.785Z","linkquality":43,"power":0,"power_outage_memory":null,"state":"OFF","update":{"installed_version":69,"latest_version":69,"state":"idle"},"update_available":null,"voltage":242}'

I have no idea why is that.
I have tried to downgrade the Z-Stack of the coordinator to 20240315, but that didn’t changed the reporting interval of the devices. Right now I’m not sure what it was like before, though I give it 90% it was not reporting at that crazy intervals as I would notice that in the logs!

I have tried to change Reporting for those devices - but guess what - it cannot be done, with very strange UI behavior.
When I try to change it wit will change in UI and claim it was written to the device. At the same time it will add copy of the same line with the old value (!?). After trying to remove the old one, it will get back to initial state …

Note that last duplicated line with 59 sec set. Attempt to remove first one with 5 sec will leave only one with initial 5 sec.
So no changes - probably because of the device - no idea however why UI cannot communicate that device cannot accept it, letting you believe instead that it went OK.

Screenshot above however shows where the problem might be: device defaults have Min rep interval set to 5 seconds for all 3 parameters to be reported.

Anyone has the same problem?
Could anyone with same coordinator and devices check reporting interval of those devices? I have now 50 devices in the network. If it will go above 100 it might start slowing down !

Thanks in advance!

BR, RAF