You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
After upgrading Z2M to v1.37.0, the state of my Aqara Roller Shade Drivers E1 is now Unknown in Home Assistant, due to which in Google Home the devices appear to be offline. The roller shades are still controllable via voice command from Google Assistant, though every time i issue a voice command i get an error saying that the feature is not supported for the devices (opening, closing, setting a certain percentage) and in the Google Home UI the devices appear offline and show no command available. The roller shades are also controllable via Home Assistant without any issue there. This only affects Google Home.
What did you expect to happen?
I expected that the roller shades would appear online in Google Home, the controls to be available in the Google Home UI and that there would be no error when issuing voice commands via Google Assistant
How to reproduce it (minimal and precise)
Pair a roller shade driver E1 to Z2M in Home Assistant > publish the device to Google Home via Nabu Casa cloud > Check the device state in Google Home UI/Issue a command for the roller shade via Google Assistant.
Zigbee2MQTT version
1.37.0
Adapter firmware version
20230507
Adapter
Sonoff ZB Dongle-P (CC2652P)
Setup
Home Assistant Supervised installation on Debian 12 running on generic x86 hardware
similar problem here, although after upgrading my blinds are always "closed" which was the state they were before upgrading. Changing the settings to invert the position also does not help and the state remains closed. As you can see below the state is closed, but the position is actually open.
What happened?
After upgrading Z2M to v1.37.0, the state of my Aqara Roller Shade Drivers E1 is now Unknown in Home Assistant, due to which in Google Home the devices appear to be offline. The roller shades are still controllable via voice command from Google Assistant, though every time i issue a voice command i get an error saying that the feature is not supported for the devices (opening, closing, setting a certain percentage) and in the Google Home UI the devices appear offline and show no command available. The roller shades are also controllable via Home Assistant without any issue there. This only affects Google Home.
What did you expect to happen?
I expected that the roller shades would appear online in Google Home, the controls to be available in the Google Home UI and that there would be no error when issuing voice commands via Google Assistant
How to reproduce it (minimal and precise)
Pair a roller shade driver E1 to Z2M in Home Assistant > publish the device to Google Home via Nabu Casa cloud > Check the device state in Google Home UI/Issue a command for the roller shade via Google Assistant.
Zigbee2MQTT version
1.37.0
Adapter firmware version
20230507
Adapter
Sonoff ZB Dongle-P (CC2652P)
Setup
Home Assistant Supervised installation on Debian 12 running on generic x86 hardware
Debug log
log.log
The text was updated successfully, but these errors were encountered: