-
-
Notifications
You must be signed in to change notification settings - Fork 1.7k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
No serial interface on USB Zigbee sniffer with CC2530 #790
Comments
Did you flash the debug firmware? on linux it shouldbe something like /dev/ttyACM0, windows will show as a virtual COM port |
what do you mean |
Diesen sniffer kannst du nicht über die usb schnittstelle flashen. Das musst du über die 4 bzw 5 pins an der seite tun. Hast du das gemacht? Die pins von links nach rechts sind: |
@dossidr thanks for an answer. There are 5 pins on module but they are not labeled and i can't find a pinout online. Do you know which pins are TX/RX? |
Why do you need RX/TX? The Stick self has an USB Slot. The USB you plugged in your Linux Server an see "dmesg" == /dev/ttyUSB or /dev/ttyACM0 after the successfully flashed Firmware. These 5 Pins you only need to be flashed the Firmware with CC-Debugger direct. I think that is your misunderstanding how to use the sniffer USB stick?! Best regards |
You can flash your Device directy with CC-Debugger. Connect you can see page 9 *pdf File |
I have flashed it successfully but serial port does not appear.
Here is dmesg output on ubuntu:
But there is no |
EDIT:
EDIT2: |
CC2531 has built-in USB support but i have an older CC2530 without USB. |
Hello Guys, info: lsusb dmesg ls -la /dev/ttyA* Thanks for your help ;) |
Hello guys, Something goes wrong on my previous raspberry + raspbian installation: ls /lib/modules/ uname -a do I have to update my current kernel ? Is it risky for the system ? Thanks |
Hello guys, |
@maxic62: I have the same USB dongle as you have. Did you get it to work with a raspberry pi running linux? I have the same problem that no tty device is available when plugging in the dongle. |
I've finished buying CC2531 |
What do you mean? |
I wasn't able to make it work on CC2530 and bought CC2531. |
@untitledlt: Thanks for your reply! Looks like I also have to use the 2531 instead of 2530. Cheers! |
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions. |
I know it's not zigbee2mqtt related but i got stuck in an early stage.
I have flashed my USB sniffer with CC2530 as per http://ptvo.info/how-to-select-and-flash-cc2530-144/ instructions.
Flashing went without any errors but i'm not sure what i should do next.
Device does not list serial interface (tried ubuntu and os x).
Is USB for flashing only?
Device i'm using: https://www.aliexpress.com/item/ZigBee-CC2531-USB-Dongle/1830760873.html?spm=2114.search0104.3.186.74ca6ec0pjSnhC&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10890_319_10546_317_10548_10696_453_10084_454_10083_10618_10307_10820_10303_537_536_10059_10884_10887_100031_321_322_10103-10890,searchweb201603_51,ppcSwitch_0&algo_expid=944b3f07-4922-4e16-b005-1570f6258d6a-27&algo_pvid=944b3f07-4922-4e16-b005-1570f6258d6a
The text was updated successfully, but these errors were encountered: