Skip to content

Latest commit

 

History

History
458 lines (327 loc) · 21.9 KB

getting_started_locally.md

File metadata and controls

458 lines (327 loc) · 21.9 KB
Raw

Deploying Gardener Locally

This document will walk you through deploying Gardener on your local machine. If you encounter difficulties, please open an issue so that we can make this process easier.

Overview

Gardener runs in any Kubernetes cluster. In this guide, we will start a KinD cluster which is used as both garden and seed cluster (please refer to the architecture overview) for simplicity.

Based on Skaffold, the container images for all required components will be built and deployed into the cluster (via their Helm charts).

Architecture Diagram

Alternatives

When deploying Gardener on your local machine you might face several limitations:

  • Your machine doesn't have enough compute resources (see prerequisites) for hosting a second seed cluster or multiple shoot clusters.
  • Testing Gardener's IPv6 features requires a Linux machine and native IPv6 connectivity to the internet, but you're on macOS or don't have IPv6 connectivity in your office environment or via your home ISP.

In these cases, you might want to check out one of the following options that run the setup described in this guide elsewhere for circumventing these limitations:

Prerequisites

  • Make sure that you have followed the Local Setup guide up until the Get the sources step.
  • Make sure your Docker daemon is up-to-date, up and running and has enough resources (at least 8 CPUs and 8Gi memory; see here how to configure the resources for Docker for Mac).

    Please note that 8 CPU / 8Gi memory might not be enough for more than two Shoot clusters, i.e., you might need to increase these values if you want to run additional Shoots. If you plan on following the optional steps to create a second seed cluster, the required resources will be more - at least 10 CPUs and 18Gi memory. Additionally, please configure at least 120Gi of disk size for the Docker daemon. Tip: You can clean up unused data with docker system df and docker system prune -a.

Setting Up the KinD Cluster (Garden and Seed)

make kind-up

If you want to setup an IPv6 KinD cluster, use make kind-up IPFAMILY=ipv6 instead.

This command sets up a new KinD cluster named gardener-local and stores the kubeconfig in the ./example/gardener-local/kind/local/kubeconfig file.

It might be helpful to copy this file to $HOME/.kube/config, since you will need to target this KinD cluster multiple times. Alternatively, make sure to set your KUBECONFIG environment variable to ./example/gardener-local/kind/local/kubeconfig for all future steps via export KUBECONFIG=$PWD/example/gardener-local/kind/local/kubeconfig.

All of the following steps assume that you are using this kubeconfig.

Additionally, this command also deploys a local container registry to the cluster, as well as a few registry mirrors, that are set up as a pull-through cache for all upstream registries Gardener uses by default. This is done to speed up image pulls across local clusters.

You will need to add 127.0.0.1 garden.local.gardener.cloud to your /etc/hosts.

The local registry can now be accessed either via localhost:5001 or garden.local.gardener.cloud:5001 for pushing and pulling. The storage directories of the registries are mounted to the host machine under dev/local-registry. With this, mirrored images don't have to be pulled again after recreating the cluster.

The command also deploys a default calico installation as the cluster's CNI implementation with NetworkPolicy support (the default kindnet CNI doesn't provide NetworkPolicy support). Furthermore, it deploys the metrics-server in order to support HPA and VPA on the seed cluster.

Setting Up IPv6 Single-Stack Networking (optional)

First, ensure that your /etc/hosts file contains an entry resolving garden.local.gardener.cloud to the IPv6 loopback address:

::1 garden.local.gardener.cloud

Typically, only ip6-localhost is mapped to ::1 on linux machines. However, we need garden.local.gardener.cloud to resolve to both 127.0.0.1 and ::1 so that we can talk to our registry via a single address (garden.local.gardener.cloud:5001).

Next, we need to configure NAT for outgoing traffic from the kind network to the internet. After executing make kind-up IPFAMILY=ipv6, execute the following command to set up the corresponding iptables rules:

ip6tables -t nat -A POSTROUTING -o $(ip route show default | awk '{print $5}') -s fd00:10::/64 -j MASQUERADE

Setting Up Gardener

make gardener-up

If you want to setup an IPv6 ready Gardener, use make gardener-up IPFAMILY=ipv6 instead.

This will first build the base images (which might take a bit if you do it for the first time). Afterwards, the Gardener resources will be deployed into the cluster.

Developing Gardener

make gardener-dev

This is similar to make gardener-up but additionally starts a skaffold dev loop. After the initial deployment, skaffold starts watching source files. Once it has detected changes, press any key to trigger a new build and deployment of the changed components.

Tip: you can set the SKAFFOLD_MODULE environment variable to select specific modules of the skaffold configuration (see skaffold.yaml) that skaffold should watch, build, and deploy. This significantly reduces turnaround times during development.

For example, if you want to develop changes to gardenlet:

# initial deployment of all components
make gardener-up
# start iterating on gardenlet without deploying other components
make gardener-dev SKAFFOLD_MODULE=gardenlet

Debugging Gardener

make gardener-debug

This is using skaffold debugging features. In the Gardener case, Go debugging using Delve is the most relevant use case. Please see the skaffold debugging documentation how to set up your IDE accordingly or check the examples below (GoLand, VS Code).

SKAFFOLD_MODULE environment variable is working the same way as described for Developing Gardener. However, skaffold is not watching for changes when debugging, because it would like to avoid interrupting your debugging session.

For example, if you want to debug gardenlet:

# initial deployment of all components
make gardener-up
# start debugging gardenlet without deploying other components
make gardener-debug SKAFFOLD_MODULE=gardenlet

In debugging flow, skaffold builds your container images, reconfigures your pods and creates port forwardings for the Delve debugging ports to your localhost. The default port is 56268. If you debug multiple pods at the same time, the port of the second pod will be forwarded to 56269 and so on. Please check your console output for the concrete port-forwarding on your machine.

Note: Resuming or stopping only a single goroutine (Go Issue 25578, 31132) is currently not supported, so the action will cause all the goroutines to get activated or paused. (vscode-go wiki)

This means that when a goroutine of gardenlet (or any other gardener-core component you try to debug) is paused on a breakpoint, all the other goroutines are paused. Hence, when the whole gardenlet process is paused, it can not renew its lease and can not respond to the liveness and readiness probes. Skaffold automatically increases timeoutSeconds of liveness and readiness probes to 600. Anyway, we were facing problems when debugging that pods have been killed after a while.

Thus, leader election, health and readiness checks for gardener-admission-controller, gardener-apiserver, gardener-controller-manager, gardener-scheduler,gardenlet and operator are disabled when debugging.

If you have similar problems with other components which are not deployed by skaffold, you could temporarily turn off the leader election and disable liveness and readiness probes there too.

Debugging in GoLand

  1. Edit your Run/Debug Configurations.
  2. Add a new Go Remote configuration.
  3. Set the port to 56268 (or any increment of it when debugging multiple components).
  4. Recommended: Change the behavior of On disconnect to Leave it running.

Debugging in VS Code

  1. Create or edit your .vscode/launch.json configuration.
  2. Add the following configuration:
{
  "name": "go remote",
  "type": "go",
  "request": "attach",
  "mode": "remote",
  "port": 56268, // or any increment of it when debugging multiple components
  "host": "127.0.0.1"
}

Since the ko builder is used in Skaffold to build the images, it's not necessary to specify the cwd and remotePath options as they match the workspace folder (ref).

Creating a Shoot Cluster

You can wait for the Seed to be ready by running:

./hack/usage/wait-for.sh seed local GardenletReady SeedSystemComponentsHealthy ExtensionsReady

Alternatively, you can run kubectl get seed local and wait for the STATUS to indicate readiness:

NAME    STATUS   PROVIDER   REGION   AGE     VERSION       K8S VERSION
local   Ready    local      local    4m42s   vX.Y.Z-dev    v1.25.1

In order to create a first shoot cluster, just run:

kubectl apply -f example/provider-local/shoot.yaml

You can wait for the Shoot to be ready by running:

NAMESPACE=garden-local ./hack/usage/wait-for.sh shoot local APIServerAvailable ControlPlaneHealthy ObservabilityComponentsHealthy EveryNodeReady SystemComponentsHealthy

Alternatively, you can run kubectl -n garden-local get shoot local and wait for the LAST OPERATION to reach 100%:

NAME    CLOUDPROFILE   PROVIDER   REGION   K8S VERSION   HIBERNATION   LAST OPERATION            STATUS    AGE
local   local          local      local    1.25.1        Awake         Create Processing (43%)   healthy   94s

If you don't need any worker pools, you can create a workerless Shoot by running:

kubectl apply -f example/provider-local/shoot-workerless.yaml

(Optional): You could also execute a simple e2e test (creating and deleting a shoot) by running:

make test-e2e-local-simple KUBECONFIG="$PWD/example/gardener-local/kind/local/kubeconfig"

Accessing the Shoot Cluster

⚠️ Please note that in this setup, shoot clusters are not accessible by default when you download the kubeconfig and try to communicate with them. The reason is that your host most probably cannot resolve the DNS names of the clusters since provider-local extension runs inside the KinD cluster (for more details, see DNSRecord). Hence, if you want to access the shoot cluster, you have to run the following command which will extend your /etc/hosts file with the required information to make the DNS names resolvable:

cat <<EOF | sudo tee -a /etc/hosts

# Begin of Gardener local setup section
# Shoot API server domains
172.18.255.1 api.local.local.external.local.gardener.cloud
172.18.255.1 api.local.local.internal.local.gardener.cloud

# Ingress
172.18.255.1 p-seed.ingress.local.seed.local.gardener.cloud
172.18.255.1 g-seed.ingress.local.seed.local.gardener.cloud
172.18.255.1 gu-local--local.ingress.local.seed.local.gardener.cloud
172.18.255.1 p-local--local.ingress.local.seed.local.gardener.cloud
172.18.255.1 v-local--local.ingress.local.seed.local.gardener.cloud

# E2e tests
172.18.255.1 api.e2e-managedseed.garden.external.local.gardener.cloud
172.18.255.1 api.e2e-managedseed.garden.internal.local.gardener.cloud
172.18.255.1 api.e2e-hib.local.external.local.gardener.cloud
172.18.255.1 api.e2e-hib.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-hib-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-hib-wl.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-unpriv.local.external.local.gardener.cloud
172.18.255.1 api.e2e-unpriv.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-wake-up.local.external.local.gardener.cloud
172.18.255.1 api.e2e-wake-up.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-wake-up-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-wake-up-wl.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-wake-up-ncp.local.external.local.gardener.cloud
172.18.255.1 api.e2e-wake-up-ncp.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-migrate.local.external.local.gardener.cloud
172.18.255.1 api.e2e-migrate.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-migrate-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-migrate-wl.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-mgr-hib.local.external.local.gardener.cloud
172.18.255.1 api.e2e-mgr-hib.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-rotate.local.external.local.gardener.cloud
172.18.255.1 api.e2e-rotate.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-rotate-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-rotate-wl.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-default.local.external.local.gardener.cloud
172.18.255.1 api.e2e-default.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-default-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-default-wl.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-force-delete.local.external.local.gardener.cloud
172.18.255.1 api.e2e-force-delete.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-fd-hib.local.external.local.gardener.cloud
172.18.255.1 api.e2e-fd-hib.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-upd-node.local.external.local.gardener.cloud
172.18.255.1 api.e2e-upd-node.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-upd-node-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-upd-node-wl.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-upgrade.local.external.local.gardener.cloud
172.18.255.1 api.e2e-upgrade.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-upgrade-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-upgrade-wl.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-upg-hib.local.external.local.gardener.cloud
172.18.255.1 api.e2e-upg-hib.local.internal.local.gardener.cloud
172.18.255.1 api.e2e-upg-hib-wl.local.external.local.gardener.cloud
172.18.255.1 api.e2e-upg-hib-wl.local.internal.local.gardener.cloud
172.18.255.1 gu-local--e2e-rotate.ingress.local.seed.local.gardener.cloud
172.18.255.1 gu-local--e2e-rotate-wl.ingress.local.seed.local.gardener.cloud
# End of Gardener local setup section
EOF

To access the Shoot, you can acquire a kubeconfig by using the shoots/adminkubeconfig subresource.

For convenience a helper script is provided in the hack directory. By default the script will generate a kubeconfig for a Shoot named "local" in the garden-local namespace valid for one hour.

./hack/usage/generate-admin-kubeconf.sh > admin-kubeconf.yaml

If you want to change the default namespace or shoot name, you can do so by passing different values as arguments.

./hack/usage/generate-admin-kubeconf.sh --namespace <namespace> --shoot-name <shootname> > admin-kubeconf.yaml

To access an Ingress resource from the Seed, use the Ingress host with port 8448 (https://<ingress-host>:8448, for example https://gu-local--local.ingress.local.seed.local.gardener.cloud:8448).

(Optional): Setting Up a Second Seed Cluster

There are cases where you would want to create a second seed cluster in your local setup. For example, if you want to test the control plane migration feature. The following steps describe how to do that.

If you are on macOS, add a new IP address on your loopback device which will be necessary for the new KinD cluster that you will create. On macOS, the default loopback device is lo0.

sudo ip addr add 172.18.255.2 dev lo0                                  # adding 172.18.255.2 ip to the loopback interface

Next, setup the second KinD cluster:

make kind2-up

This command sets up a new KinD cluster named gardener-local2 and stores its kubeconfig in the ./example/gardener-local/kind/local2/kubeconfig file.

In order to deploy required resources in the KinD cluster that you just created, run:

make gardenlet-kind2-up

The following steps assume that you are using the kubeconfig that points to the gardener-local cluster (first KinD cluster): export KUBECONFIG=$PWD/example/gardener-local/kind/local/kubeconfig.

You can wait for the local2 Seed to be ready by running:

./hack/usage/wait-for.sh seed local2 GardenletReady SeedSystemComponentsHealthy ExtensionsReady

Alternatively, you can run kubectl get seed local2 and wait for the STATUS to indicate readiness:

NAME    STATUS   PROVIDER   REGION   AGE     VERSION       K8S VERSION
local2  Ready    local      local    4m42s   vX.Y.Z-dev    v1.25.1

If you want to perform control plane migration, you can follow the steps outlined in Control Plane Migration to migrate the shoot cluster to the second seed you just created.

Deleting the Shoot Cluster

./hack/usage/delete shoot local garden-local

(Optional): Tear Down the Second Seed Cluster

make kind2-down

Tear Down the Gardener Environment

make kind-down

Alternative Way to Set Up Garden and Seed Leveraging gardener-operator

Instead of starting Garden and Seed via make kind-up gardener-up, you can also use gardener-operator to create your local dev landscape. In this setup, the virtual garden cluster has its own load balancer, so you have to create an own DNS entry in your /etc/hosts:

cat <<EOF | sudo tee -a /etc/hosts

# Manually created to access local Gardener virtual garden cluster.
# TODO: Remove this again when the virtual garden cluster access is no longer required.
172.18.255.3 api.virtual-garden.local.gardener.cloud
EOF

You can bring up gardener-operator with this command:

make kind-operator-up operator-up

Afterwards, you can create your local Garden and install gardenlet into the KinD cluster with this command:

make operator-seed-up

You find the kubeconfig for the KinD cluster at ./example/gardener-local/kind/operator/kubeconfig. The one for the virtual garden is accessible at ./example/operator/virtual-garden/kubeconfig.

Important

When you create non-HA shoot clusters (i.e., Shoots with .spec.controlPlane.highAvailability.failureTolerance != zone), then they are not exposed via 172.18.255.1 (ref). Instead, you need to find out under which Istio instance they got exposed, and put the corresponding IP address into your /etc/hosts file:

# replace <shoot-namespace> with your shoot namespace (e.g., `shoot--foo--bar`):
kubectl -n "$(kubectl -n <shoot-namespace> get gateway kube-apiserver -o jsonpath={.spec.selector.istio} | sed 's/.*--/istio-ingress--/')" get svc istio-ingressgateway -o jsonpath={.status.loadBalancer.ingress..ip}

When the shoot cluster is HA (i.e., .spec.controlPlane.highAvailability.failureTolerance == zone), then you can access it via 172.18.255.1.

Similar as in the section Developing Gardener it's possible to run a Skaffold development loop as well using:

make operator-seed-dev

ℹ️ Please note that in this setup Skaffold is only watching for changes in the following components:

Finally, please use this command to tear down your environment:

make kind-operator-down

This setup supports creating shoots and managed seeds the same way as explained in the previous chapters. However, the development loop has limitations and the debugging setup is not working yet.

Remote Local Setup

Just like Prow is executing the KinD based integration tests in a K8s pod, it is possible to interactively run this KinD based Gardener development environment, aka "local setup", in a "remote" K8s pod.

k apply -f docs/deployment/content/remote-local-setup.yaml
k exec -it remote-local-setup-0 -- sh

tmux a

Caveats

Please refer to the TMUX documentation for working effectively inside the remote-local-setup pod.

To access Plutono, Prometheus or other components in a browser, two port forwards are needed:

The port forward from the laptop to the pod:

k port-forward remote-local-setup-0 3000

The port forward in the remote-local-setup pod to the respective component:

k port-forward -n shoot--local--local deployment/plutono 3000

Related Links