Skip to content

Latest commit

 

History

History
102 lines (81 loc) · 2.45 KB

INSTALL.md

File metadata and controls

102 lines (81 loc) · 2.45 KB
Raw

INSTALLATION PROCEDURE

Dependencies:

You need to install:

  • meson
  • flex
  • libusb-1

Installation from source:

Get the ccid-x.y.z.tar.xz archive from https://ccid.apdu.fr/files/ and do:

tar xjvf ccid-*.tar.xz
cd ccid-*
meson setup builddir
cd builddir
meson compile
sudo meson install

Installation from git repo:

git clone https://salsa.debian.org/rousseau/CCID.git
cd CCID
meson setup builddir
cd builddir
meson compile
sudo meson install

building serial reader driver

A serial CCID reader can also be connected on a serial port. By default the serial driver is not built. You must explicitly do:

meson setup builddir -Dserial=true
cd builddir
meson compile

configuring the driver for the serial reader

You have to create a file in the /etc/reader.conf.d/ directory. The file should contain something like:

# Gemalto reader with serial communication
#  - n is the serial port to use n in [0..3]
#  - reader is the reader name. It is needed for multi-slot readers.
#    Possible reader values are: 
#     GemCorePOSPro
#     GemCoreSIMPro
#     GemCoreSIMPro2
#     GemPCPinPad
#     GemPCTwin (default value)
# example: /dev/ttyS0:GemPCPinPad
#DEVICENAME        /dev/ttySn[:reader]
#FRIENDLYNAME      "GemPCTwin serial"
#LIBPATH           /usr/lib/pcsc/drivers/serial/libccidtwin.so

FRIENDLYNAME      "GemPC Twin serial"
DEVICENAME        /dev/ttyS0
LIBPATH           /usr/lib/pcsc/drivers/serial/libccidtwin.so

You will have to adapt the library path to your configuration.

By default the GemPC Twin serial reader parameters are loaded by the driver, if you use a GemPC PinPad, a GemCore POS Pro, a GemCore SIM Pro or GemCore SIM Pro 2 (or IDBridge CR30) you have to indicate it in the DEVICENAME field. Supported values are:

  • GemCorePOSPro for GemCore POS Pro
  • GemCoreSIMPro for GemCore SIM Pro
  • GemCoreSIMPro2 for IDBridge CR30
  • GemPCPinPad for GemPC PinPad
  • GemPCTwin for GemPC Twin (default value)
  • SEC1210 for Microchip SEC1210

You will then have something like:

DEVICENAME /dev/ttyS0:GemPCPinPad

/dev/ttyS0 (DEVICENAME field) is the first serial port under Linux (known as COM1 under DOS/Windows). Of course if your reader is connected to another serial port you have to adapt that.

Binary installation:

Contact your distribution support.