-
Notifications
You must be signed in to change notification settings - Fork 0
/
config.example.h
81 lines (65 loc) · 2.74 KB
/
config.example.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
/**
MobaStation config file
© 2021, Markus Mair. All rights reserved.
This file is the config file of the MobaStation
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**********************************************************************
The configuration file
**********************************************************************/
/////////////////////////////////////////////////////////////////////////////////////
// NOTE: Before connecting these boards and selecting one in this software
// check the quick install guides!!! Some of these boards require a voltage
// generating resitor on the current sense pin of the device. Failure to select
// the correct resistor could damage the sense pin on your Arduino or destroy
// the device.
//
// DEFINE MOTOR_SHIELD_TYPE BELOW ACCORDING TO THE FOLLOWING TABLE:
//
// STANDARD_MOTOR_SHIELD : Arduino Motor shield Rev3 based on the L298 with 18V 2A per channel
// POLOLU_MOTOR_SHIELD : Pololu MC33926 Motor Driver (not recommended for prog track)
// FUNDUMOTO_SHIELD : Fundumoto Shield, no current sensing (not recommended, no short protection)
// FIREBOX_MK1 : The Firebox MK1
// FIREBOX_MK1S : The Firebox MK1S
// IBT_2_WITH_ARDUINO : Arduino Motor Shield for PROG and IBT-2 for MAIN
// |
// +-----------------------v
//
#define MOTOR_SHIELD_TYPE STANDARD_MOTOR_SHIELD
/////////////////////////////////////////////////////////////////////////////////////
//
// ENABLES/DISABLE DRIVING ON PROG-TRACK
// 4
#define DRIVE_ON_PROG true
/////////////////////////////////////////////////////////////////////////////////////
//
// TURNOUT SETTINGS
//
// Sets the Tournout-Mode
// TURNOUT_MobaBus
// TURNOUT_HYBRID
// TURNOUT_DCC
//
#define TURNOUTS TURNOUT_MobaBus
//
// if TURNOUT - MODE is set to TURNOUT_HYBRID this value
// spezifies the address range (from 0 to DCC_TURNOUT_ADDRESS_RANGE) of DCC Turnouts.
// Above start the address range of MobaBus
// Max = 2047
//
#define DCC_TURNOUT_ADDRESS_RANGE 2047
//#define XPRESSNET
//#define MAX_XPRESSNET_CLIENTS 5
#define POWER_LED 25
#define POWER_BUTTON 24
#define VOLTAGE_PIN A15
#define VOLTAGE_MULTI 25.58f