StatusBarMod_230_v1.pbp

; Always display current battery level in statusbar.
; Also displays bluetooth connection status icon.
; It is not currently updated automatically on bt connection gain/lose.
;
; Note that this patch might slightly increase battery consumption
; (though not much more than regular watchface/app showing battery state).
#ver 230

; Options:
;@statusbar_battery_no_stock_icon
; Never show stock battery icon
;@+statusbar_battery_level_icon
; Show battery percentage with icon
; (You may want to disable stock battery icon to avoid icon duplication)
;@+statusbar_battery_level_icon_hide_if_stock_shown
;  Only show battery percentage icon if no stock battery icon shown
;@statusbar_battery_level_digits
; Show digital battery percentage
;@+statusbar_bluetooth_show_icon
; Show bluetooth status icon
; Normal if connected, inverted if disconnected
;@statusbar_bluetooth_hide_when_disconnected
;  Only show bluetooth icon when there is bluetooth connection

00 BF ?4 ?4 @
1F B5 ?4  8D F8 00 00  C0 F3 07 23 C0 F3 07 40
8D F8 02 00 8D F8 01 30  00 9B 00 20 {
	proc battery_state_service_peek
}
0C B4 7F B5 08 9A 05 46 {
	proc snprintf
}
F8 B5 00 AF 04 46 {
	proc fonts_get_system_font
}
"RESOURCE_ID_GOTHIC_14" 00 {
	global res_id_gothic_14
}
01 4b 18 78 70 47 00 bf ?4
; and for disambiguation:
2d e9 f0 41 11 4c 06 46
{
	proc is_airplane_mode
}
08 b5 ?4 00 30 18 bf 01 20 08 bd
; and for disambiguation:
38 b5 0c 46 15 46 10 b1
{
	proc is_bluetooth_connected
}
1f b5 04 46 c8 68 04 2a {
	proc status_bar_draw_icon
}
#include includes/graphics_210.pbi
; for disambiguation (as there seems to be more than one such icon):
"Legal" 00 00
?32
@
?4 04 00 00 10 00 00 00 00 07 00 0b 00
77 00 00 00 67 00 00 00  57 00 00 00 36 00 00 00
55 00 00 00 63 00 00 00  55 00 00 00 36 00 00 00
57 00 00 00 67 00 00 00  77 00 00 00
{
	global icon_bluetooth
}
@ ?4 04 00 00 10 00 00 00 00 10 00 10 00
"status_bar.c" 00
{
	global icon_battery_full
}

#ifdef statusbar_battery_icon_no_stock
; This matches middle of status_bar_draw procedure,
; the part responsible for determining desired
; battery level icon and drawing it if needed.
;
; prev: launch custom drawing proc if needed
2B 68 73 B1 20 46 00 21  ?4 1d 4B 20 46
19 68 06 22 8D 23 ?4        C0 F1 88 00 05 46
00 E0 8D 25
; next: BL is_airplane_mode
{
	B.W my_code
	; Skip unneeded now code to position label correctly
	DCB "SkipSkipSkipSkipSkipSkipSkipSkip"
	global continue
}
#else
; Use the same mask, but place call after its end
; prev: launch custom drawing proc if needed
; here: draw battery icon if any, and place offset to R5
2B 68 73 B1 20 46 00 21  ?4 1d 4B 20 46
19 68 06 22 8D 23 ?4        C0 F1 88 00
05 46 00 E0 8D 25
@ ?4
{
	; was: BL is_airplane_mode
	B.W my_code
	global continue
}
#endif

; Place our code to floating block
{
	proc my_code

#ifdef statusbar_battery_icon_no_stock
	MOV R5, 141 ; initialize offset: there was no battery icon, so just retain few pixel field
#endif
	; else - it was initialized when stock icon was (or wasn't) drawn

#ifdef statusbar_battery_level_icon
	CMP R5, 141 ; check offset
#ifdef statusbar_battery_level_icon_hide_if_stock_shown
	BNE battery_icon_end
#else
	BEQ battery_icon_nostock
	ADD R5, R5, 2 ; decrease stock icon's margin
	battery_icon_nostock:
#endif

	; set compositing mode (white on black)
	MOV R0, R4
	MOV R1, 0
	BL graphics_context_set_compositing_mode

	; draw "battery full" icon
	MOV R0, R4
	LDR R1, pBatteryFullIcon
	MOV R2, 6 ; shifted to right edge
	MOV R3, R5 ; shift value
	BL status_bar_draw_icon
	PUSH {R5} ; store right edge value..
	; and update shift value
	SUB R5, R0
	SUB R5, 3 ; and leave 3px margin

	MOV R0, R4
	MOV R1, 0 ; black
	BL graphics_context_set_fill_color

	; get battery level
	BL battery_state_service_peek
	UXTB R1, R0 ; just throw away charging info [for now]
	; divide by 10 (this method is slow but simple to code)
	MOV R0, 0
	divide_loop:
	CBZ R1, divide_end
	SUBS R1, 10 ; FIXME: what if R1 will not be divisible by 10?
	ADD R0, 1
	B divide_loop
	divide_end:
	; now R0 is batt_level/10
	MOV R1, 10
	SUB R0, R1, R0 ; now R0 has (10-R0), i.e. desired black rectangle width

	; draw black rectangle over right part of the icon
	POP {R1} ; x: restore icon's right edge value
	SUB R1, 3 ; ...minus right frame
	SUB R1, R0 ; ...minus rect width
	ADD R1, R1,0x60000 ; y: 6
	MOV R2, R0 ; width
	ADD R2, R2,0x40000 ; height: 4
	MOV R3, 0 ; corner_radius
	STR R3, [SP] ; corner_mask
	MOV R0, R4 ; ctx
	BL graphics_fill_rect

	battery_icon_end:
#endif

#ifdef statusbar_battery_level_digits
	BL battery_state_service_peek ; FIXME: doing this at every redraw might be power-consuming?
	; now R0 contains a BatteryChargeState structure:
	; 00 . is_plugged . is_charging . percent
	UXTB R0, R0 ; just throw away charging info for now
	PUSH {R0} ; store it for later use
	MOV R3, R0
	ADD R0, SP,16+4 ; use free space in stack (max is 0x24=36; for this string maximum is 20 chars)
					; 16+4 because original 16 offset increased by 4 with our PUSH
	MOV R1, 5 ; buffer size
	ADR R2, format
	BL snprintf
	; now we have complete "nn%" string at [old_SP+16]
	LDR R0, fontname
	BL fonts_get_system_font
	MOV R2, R0 ; font
	POP {R1} ; restore percentage value into R1, and also restore old SP value
	; now calculate text width
	CMP R1, 100
	BNE narrow
	MOV R1, 18 ; text width
	B width_ok
	narrow:
	MOV R1, 12 ; text width
	width_ok:
	MOV R0, 0
	STR R0, [SP,4] ; overflow_mode
	STR R0, [SP,8] ; alignment
	STR R0, [SP,12] ; layout
	MOV R0, R4 ; ctx
	MOV R3, R1 ; text width
	ADD R3, R3,0x000E0000 ; height: 0xE = 14 = statusbar height
	STR R3, [SP] ; box_2
	LDR R3, yminus ; y = -1
	ADD R3, R5 ; x: offset from the right...
	SUB R3, R1 ; ...minus field width
	; now while we hold text width, update R5
	SUB R5, R1 ; hold that space from other icons
	SUB R5, 2 ; and hold some more space (field)
	; and continue calling preparation
	ADD R1, SP,16 ; text
	; now R3 is box_1
	BL graphics_draw_text
#endif

#ifdef statusbar_bluetooth_show_icon
#ifdef statusbar_bluetooth_hide_when_disconnected
	BL is_bluetooth_connected
	CBZ R0, bluetooth_end ; no connection -> no icon
#endif

#ifndef statusbar_bluetooth_hide_when_disconnected
	BL is_bluetooth_connected
	MOV R1, R0 ; mode (inversion) depends on connection status
#else
	MOV R1, 1 ; always white-on-black
#endif
	MOV R0, R4
	BL graphics_context_set_compositing_mode

	MOV R0, R4 ; context
	LDR R1, bticon
	MOV R2, 6 ; icon shifted to the right
	MOV R3, R5 ; shift value
	BL status_bar_draw_icon
	SUB R5, R0 ; hold icon width space
	SUB R5, 2 ; ... and 2-pixel field

	bluetooth_end:
#endif

#ifndef statusbar_battery_no_stock_icon
	BL is_airplane_mode ; restore overwritten code
#endif
	B.W continue

	; data block
	ALIGN 4
#ifdef statusbar_battery_level_digits
	fontname:
	DCD res_id_gothic_14
	format:
	DCB "%d" 00
	ALIGN 4
	yminus:
	DCD 0xFFFF0000
#endif
#ifdef statusbar_bluetooth_show_icon
	bticon:
	DCD icon_bluetooth
#endif
#ifdef statusbar_battery_level_icon
	pBatteryFullIcon:
	DCD icon_battery_full
#endif
}