From 70288c6c4fae6a6334d7c48b9ef17da7ecf3c173 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 5 Jun 2023 00:43:31 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=8E=A8=20Detab=20C/C++?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/HAL/DUE/usb/genclk.h | 296 ++++++------- Marlin/src/HAL/DUE/usb/osc.h | 211 +++++---- Marlin/src/HAL/DUE/usb/pll.h | 254 +++++------ Marlin/src/HAL/DUE/usb/sbc_protocol.h | 111 +++-- Marlin/src/HAL/DUE/usb/spc_protocol.h | 357 ++++++++------- Marlin/src/HAL/DUE/usb/sysclk.h | 30 +- Marlin/src/HAL/DUE/usb/udc.h | 411 +++++++++--------- Marlin/src/HAL/DUE/usb/udc_desc.h | 57 ++- Marlin/src/HAL/DUE/usb/udd.h | 58 +-- Marlin/src/HAL/DUE/usb/udi.h | 94 ++-- Marlin/src/HAL/DUE/usb/udi_cdc.h | 304 +++++++------ Marlin/src/HAL/DUE/usb/udi_msc.c | 142 ++---- Marlin/src/HAL/DUE/usb/udi_msc.h | 227 +++++----- Marlin/src/HAL/DUE/usb/uotghs_otg.h | 27 +- Marlin/src/HAL/DUE/usb/usb_protocol.h | 266 ++++++------ Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h | 132 +++--- Marlin/src/HAL/DUE/usb/usb_protocol_msc.h | 64 +-- .../marlin_maple_CHITU_F103/board/board.h | 12 +- .../marlin_maple_MEEB_3DP/board/board.h | 12 +- 19 files changed, 1463 insertions(+), 1602 deletions(-) diff --git a/Marlin/src/HAL/DUE/usb/genclk.h b/Marlin/src/HAL/DUE/usb/genclk.h index cde03bc0d107..45eba5873f8c 100644 --- a/Marlin/src/HAL/DUE/usb/genclk.h +++ b/Marlin/src/HAL/DUE/usb/genclk.h @@ -74,17 +74,17 @@ extern "C" { //@{ enum genclk_source { - GENCLK_PCK_SRC_SLCK_RC = 0, //!< Internal 32kHz RC oscillator as PCK source clock - GENCLK_PCK_SRC_SLCK_XTAL = 1, //!< External 32kHz crystal oscillator as PCK source clock - GENCLK_PCK_SRC_SLCK_BYPASS = 2, //!< External 32kHz bypass oscillator as PCK source clock - GENCLK_PCK_SRC_MAINCK_4M_RC = 3, //!< Internal 4MHz RC oscillator as PCK source clock - GENCLK_PCK_SRC_MAINCK_8M_RC = 4, //!< Internal 8MHz RC oscillator as PCK source clock - GENCLK_PCK_SRC_MAINCK_12M_RC = 5, //!< Internal 12MHz RC oscillator as PCK source clock - GENCLK_PCK_SRC_MAINCK_XTAL = 6, //!< External crystal oscillator as PCK source clock - GENCLK_PCK_SRC_MAINCK_BYPASS = 7, //!< External bypass oscillator as PCK source clock - GENCLK_PCK_SRC_PLLACK = 8, //!< Use PLLACK as PCK source clock - GENCLK_PCK_SRC_PLLBCK = 9, //!< Use PLLBCK as PCK source clock - GENCLK_PCK_SRC_MCK = 10, //!< Use Master Clk as PCK source clock + GENCLK_PCK_SRC_SLCK_RC = 0, //!< Internal 32kHz RC oscillator as PCK source clock + GENCLK_PCK_SRC_SLCK_XTAL = 1, //!< External 32kHz crystal oscillator as PCK source clock + GENCLK_PCK_SRC_SLCK_BYPASS = 2, //!< External 32kHz bypass oscillator as PCK source clock + GENCLK_PCK_SRC_MAINCK_4M_RC = 3, //!< Internal 4MHz RC oscillator as PCK source clock + GENCLK_PCK_SRC_MAINCK_8M_RC = 4, //!< Internal 8MHz RC oscillator as PCK source clock + GENCLK_PCK_SRC_MAINCK_12M_RC = 5, //!< Internal 12MHz RC oscillator as PCK source clock + GENCLK_PCK_SRC_MAINCK_XTAL = 6, //!< External crystal oscillator as PCK source clock + GENCLK_PCK_SRC_MAINCK_BYPASS = 7, //!< External bypass oscillator as PCK source clock + GENCLK_PCK_SRC_PLLACK = 8, //!< Use PLLACK as PCK source clock + GENCLK_PCK_SRC_PLLBCK = 9, //!< Use PLLBCK as PCK source clock + GENCLK_PCK_SRC_MCK = 10, //!< Use Master Clk as PCK source clock }; //@} @@ -93,176 +93,162 @@ enum genclk_source { //@{ enum genclk_divider { - GENCLK_PCK_PRES_1 = PMC_PCK_PRES_CLK_1, //!< Set PCK clock prescaler to 1 - GENCLK_PCK_PRES_2 = PMC_PCK_PRES_CLK_2, //!< Set PCK clock prescaler to 2 - GENCLK_PCK_PRES_4 = PMC_PCK_PRES_CLK_4, //!< Set PCK clock prescaler to 4 - GENCLK_PCK_PRES_8 = PMC_PCK_PRES_CLK_8, //!< Set PCK clock prescaler to 8 - GENCLK_PCK_PRES_16 = PMC_PCK_PRES_CLK_16, //!< Set PCK clock prescaler to 16 - GENCLK_PCK_PRES_32 = PMC_PCK_PRES_CLK_32, //!< Set PCK clock prescaler to 32 - GENCLK_PCK_PRES_64 = PMC_PCK_PRES_CLK_64, //!< Set PCK clock prescaler to 64 + GENCLK_PCK_PRES_1 = PMC_PCK_PRES_CLK_1, //!< Set PCK clock prescaler to 1 + GENCLK_PCK_PRES_2 = PMC_PCK_PRES_CLK_2, //!< Set PCK clock prescaler to 2 + GENCLK_PCK_PRES_4 = PMC_PCK_PRES_CLK_4, //!< Set PCK clock prescaler to 4 + GENCLK_PCK_PRES_8 = PMC_PCK_PRES_CLK_8, //!< Set PCK clock prescaler to 8 + GENCLK_PCK_PRES_16 = PMC_PCK_PRES_CLK_16, //!< Set PCK clock prescaler to 16 + GENCLK_PCK_PRES_32 = PMC_PCK_PRES_CLK_32, //!< Set PCK clock prescaler to 32 + GENCLK_PCK_PRES_64 = PMC_PCK_PRES_CLK_64, //!< Set PCK clock prescaler to 64 }; //@} struct genclk_config { - uint32_t ctrl; + uint32_t ctrl; }; -static inline void genclk_config_defaults(struct genclk_config *p_cfg, - uint32_t ul_id) -{ - ul_id = ul_id; - p_cfg->ctrl = 0; +static inline void genclk_config_defaults(struct genclk_config *p_cfg, uint32_t ul_id) { + ul_id = ul_id; + p_cfg->ctrl = 0; } -static inline void genclk_config_read(struct genclk_config *p_cfg, - uint32_t ul_id) -{ - p_cfg->ctrl = PMC->PMC_PCK[ul_id]; +static inline void genclk_config_read(struct genclk_config *p_cfg, uint32_t ul_id) { + p_cfg->ctrl = PMC->PMC_PCK[ul_id]; } -static inline void genclk_config_write(const struct genclk_config *p_cfg, - uint32_t ul_id) -{ - PMC->PMC_PCK[ul_id] = p_cfg->ctrl; +static inline void genclk_config_write(const struct genclk_config *p_cfg, uint32_t ul_id) { + PMC->PMC_PCK[ul_id] = p_cfg->ctrl; } //! \name Programmable Clock Source and Prescaler configuration //@{ -static inline void genclk_config_set_source(struct genclk_config *p_cfg, - enum genclk_source e_src) -{ - p_cfg->ctrl &= (~PMC_PCK_CSS_Msk); - - switch (e_src) { - case GENCLK_PCK_SRC_SLCK_RC: - case GENCLK_PCK_SRC_SLCK_XTAL: - case GENCLK_PCK_SRC_SLCK_BYPASS: - p_cfg->ctrl |= (PMC_PCK_CSS_SLOW_CLK); - break; - - case GENCLK_PCK_SRC_MAINCK_4M_RC: - case GENCLK_PCK_SRC_MAINCK_8M_RC: - case GENCLK_PCK_SRC_MAINCK_12M_RC: - case GENCLK_PCK_SRC_MAINCK_XTAL: - case GENCLK_PCK_SRC_MAINCK_BYPASS: - p_cfg->ctrl |= (PMC_PCK_CSS_MAIN_CLK); - break; - - case GENCLK_PCK_SRC_PLLACK: - p_cfg->ctrl |= (PMC_PCK_CSS_PLLA_CLK); - break; - - case GENCLK_PCK_SRC_PLLBCK: - p_cfg->ctrl |= (PMC_PCK_CSS_UPLL_CLK); - break; - - case GENCLK_PCK_SRC_MCK: - p_cfg->ctrl |= (PMC_PCK_CSS_MCK); - break; - } +static inline void genclk_config_set_source(struct genclk_config *p_cfg, enum genclk_source e_src) { + p_cfg->ctrl &= (~PMC_PCK_CSS_Msk); + + switch (e_src) { + case GENCLK_PCK_SRC_SLCK_RC: + case GENCLK_PCK_SRC_SLCK_XTAL: + case GENCLK_PCK_SRC_SLCK_BYPASS: + p_cfg->ctrl |= (PMC_PCK_CSS_SLOW_CLK); + break; + + case GENCLK_PCK_SRC_MAINCK_4M_RC: + case GENCLK_PCK_SRC_MAINCK_8M_RC: + case GENCLK_PCK_SRC_MAINCK_12M_RC: + case GENCLK_PCK_SRC_MAINCK_XTAL: + case GENCLK_PCK_SRC_MAINCK_BYPASS: + p_cfg->ctrl |= (PMC_PCK_CSS_MAIN_CLK); + break; + + case GENCLK_PCK_SRC_PLLACK: + p_cfg->ctrl |= (PMC_PCK_CSS_PLLA_CLK); + break; + + case GENCLK_PCK_SRC_PLLBCK: + p_cfg->ctrl |= (PMC_PCK_CSS_UPLL_CLK); + break; + + case GENCLK_PCK_SRC_MCK: + p_cfg->ctrl |= (PMC_PCK_CSS_MCK); + break; + } } -static inline void genclk_config_set_divider(struct genclk_config *p_cfg, - uint32_t e_divider) -{ - p_cfg->ctrl &= ~PMC_PCK_PRES_Msk; - p_cfg->ctrl |= e_divider; +static inline void genclk_config_set_divider(struct genclk_config *p_cfg, uint32_t e_divider) { + p_cfg->ctrl &= ~PMC_PCK_PRES_Msk; + p_cfg->ctrl |= e_divider; } //@} -static inline void genclk_enable(const struct genclk_config *p_cfg, - uint32_t ul_id) -{ - PMC->PMC_PCK[ul_id] = p_cfg->ctrl; - pmc_enable_pck(ul_id); +static inline void genclk_enable(const struct genclk_config *p_cfg, uint32_t ul_id) { + PMC->PMC_PCK[ul_id] = p_cfg->ctrl; + pmc_enable_pck(ul_id); } -static inline void genclk_disable(uint32_t ul_id) -{ - pmc_disable_pck(ul_id); +static inline void genclk_disable(uint32_t ul_id) { + pmc_disable_pck(ul_id); } -static inline void genclk_enable_source(enum genclk_source e_src) -{ - switch (e_src) { - case GENCLK_PCK_SRC_SLCK_RC: - if (!osc_is_ready(OSC_SLCK_32K_RC)) { - osc_enable(OSC_SLCK_32K_RC); - osc_wait_ready(OSC_SLCK_32K_RC); - } - break; - - case GENCLK_PCK_SRC_SLCK_XTAL: - if (!osc_is_ready(OSC_SLCK_32K_XTAL)) { - osc_enable(OSC_SLCK_32K_XTAL); - osc_wait_ready(OSC_SLCK_32K_XTAL); - } - break; - - case GENCLK_PCK_SRC_SLCK_BYPASS: - if (!osc_is_ready(OSC_SLCK_32K_BYPASS)) { - osc_enable(OSC_SLCK_32K_BYPASS); - osc_wait_ready(OSC_SLCK_32K_BYPASS); - } - break; - - case GENCLK_PCK_SRC_MAINCK_4M_RC: - if (!osc_is_ready(OSC_MAINCK_4M_RC)) { - osc_enable(OSC_MAINCK_4M_RC); - osc_wait_ready(OSC_MAINCK_4M_RC); - } - break; - - case GENCLK_PCK_SRC_MAINCK_8M_RC: - if (!osc_is_ready(OSC_MAINCK_8M_RC)) { - osc_enable(OSC_MAINCK_8M_RC); - osc_wait_ready(OSC_MAINCK_8M_RC); - } - break; - - case GENCLK_PCK_SRC_MAINCK_12M_RC: - if (!osc_is_ready(OSC_MAINCK_12M_RC)) { - osc_enable(OSC_MAINCK_12M_RC); - osc_wait_ready(OSC_MAINCK_12M_RC); - } - break; - - case GENCLK_PCK_SRC_MAINCK_XTAL: - if (!osc_is_ready(OSC_MAINCK_XTAL)) { - osc_enable(OSC_MAINCK_XTAL); - osc_wait_ready(OSC_MAINCK_XTAL); - } - break; - - case GENCLK_PCK_SRC_MAINCK_BYPASS: - if (!osc_is_ready(OSC_MAINCK_BYPASS)) { - osc_enable(OSC_MAINCK_BYPASS); - osc_wait_ready(OSC_MAINCK_BYPASS); - } - break; - -#ifdef CONFIG_PLL0_SOURCE - case GENCLK_PCK_SRC_PLLACK: - pll_enable_config_defaults(0); - break; -#endif - -#ifdef CONFIG_PLL1_SOURCE - case GENCLK_PCK_SRC_PLLBCK: - pll_enable_config_defaults(1); - break; -#endif - - case GENCLK_PCK_SRC_MCK: - break; - - default: - Assert(false); - break; - } +static inline void genclk_enable_source(enum genclk_source e_src) { + switch (e_src) { + case GENCLK_PCK_SRC_SLCK_RC: + if (!osc_is_ready(OSC_SLCK_32K_RC)) { + osc_enable(OSC_SLCK_32K_RC); + osc_wait_ready(OSC_SLCK_32K_RC); + } + break; + + case GENCLK_PCK_SRC_SLCK_XTAL: + if (!osc_is_ready(OSC_SLCK_32K_XTAL)) { + osc_enable(OSC_SLCK_32K_XTAL); + osc_wait_ready(OSC_SLCK_32K_XTAL); + } + break; + + case GENCLK_PCK_SRC_SLCK_BYPASS: + if (!osc_is_ready(OSC_SLCK_32K_BYPASS)) { + osc_enable(OSC_SLCK_32K_BYPASS); + osc_wait_ready(OSC_SLCK_32K_BYPASS); + } + break; + + case GENCLK_PCK_SRC_MAINCK_4M_RC: + if (!osc_is_ready(OSC_MAINCK_4M_RC)) { + osc_enable(OSC_MAINCK_4M_RC); + osc_wait_ready(OSC_MAINCK_4M_RC); + } + break; + + case GENCLK_PCK_SRC_MAINCK_8M_RC: + if (!osc_is_ready(OSC_MAINCK_8M_RC)) { + osc_enable(OSC_MAINCK_8M_RC); + osc_wait_ready(OSC_MAINCK_8M_RC); + } + break; + + case GENCLK_PCK_SRC_MAINCK_12M_RC: + if (!osc_is_ready(OSC_MAINCK_12M_RC)) { + osc_enable(OSC_MAINCK_12M_RC); + osc_wait_ready(OSC_MAINCK_12M_RC); + } + break; + + case GENCLK_PCK_SRC_MAINCK_XTAL: + if (!osc_is_ready(OSC_MAINCK_XTAL)) { + osc_enable(OSC_MAINCK_XTAL); + osc_wait_ready(OSC_MAINCK_XTAL); + } + break; + + case GENCLK_PCK_SRC_MAINCK_BYPASS: + if (!osc_is_ready(OSC_MAINCK_BYPASS)) { + osc_enable(OSC_MAINCK_BYPASS); + osc_wait_ready(OSC_MAINCK_BYPASS); + } + break; + + #ifdef CONFIG_PLL0_SOURCE + case GENCLK_PCK_SRC_PLLACK: + pll_enable_config_defaults(0); + break; + #endif + + #ifdef CONFIG_PLL1_SOURCE + case GENCLK_PCK_SRC_PLLBCK: + pll_enable_config_defaults(1); + break; + #endif + + case GENCLK_PCK_SRC_MCK: + break; + + default: + Assert(false); + break; + } } //! @} diff --git a/Marlin/src/HAL/DUE/usb/osc.h b/Marlin/src/HAL/DUE/usb/osc.h index 953bcbbed1d3..c0ae24381a39 100644 --- a/Marlin/src/HAL/DUE/usb/osc.h +++ b/Marlin/src/HAL/DUE/usb/osc.h @@ -62,28 +62,28 @@ extern "C" { * should be defined by the board code, otherwise default value are used. */ #ifndef BOARD_FREQ_SLCK_XTAL -# warning The board slow clock xtal frequency has not been defined. -# define BOARD_FREQ_SLCK_XTAL (32768UL) + #warning The board slow clock xtal frequency has not been defined. + #define BOARD_FREQ_SLCK_XTAL (32768UL) #endif #ifndef BOARD_FREQ_SLCK_BYPASS -# warning The board slow clock bypass frequency has not been defined. -# define BOARD_FREQ_SLCK_BYPASS (32768UL) + #warning The board slow clock bypass frequency has not been defined. + #define BOARD_FREQ_SLCK_BYPASS (32768UL) #endif #ifndef BOARD_FREQ_MAINCK_XTAL -# warning The board main clock xtal frequency has not been defined. -# define BOARD_FREQ_MAINCK_XTAL (12000000UL) + #warning The board main clock xtal frequency has not been defined. + #define BOARD_FREQ_MAINCK_XTAL (12000000UL) #endif #ifndef BOARD_FREQ_MAINCK_BYPASS -# warning The board main clock bypass frequency has not been defined. -# define BOARD_FREQ_MAINCK_BYPASS (12000000UL) + #warning The board main clock bypass frequency has not been defined. + #define BOARD_FREQ_MAINCK_BYPASS (12000000UL) #endif #ifndef BOARD_OSC_STARTUP_US -# warning The board main clock xtal startup time has not been defined. -# define BOARD_OSC_STARTUP_US (15625UL) + #warning The board main clock xtal startup time has not been defined. + #define BOARD_OSC_STARTUP_US (15625UL) #endif /** @@ -115,122 +115,118 @@ extern "C" { #define OSC_MAINCK_BYPASS_HZ BOARD_FREQ_MAINCK_BYPASS //!< External bypass oscillator. //@} -static inline void osc_enable(uint32_t ul_id) -{ - switch (ul_id) { - case OSC_SLCK_32K_RC: - break; +static inline void osc_enable(uint32_t ul_id) { + switch (ul_id) { + case OSC_SLCK_32K_RC: + break; - case OSC_SLCK_32K_XTAL: - pmc_switch_sclk_to_32kxtal(PMC_OSC_XTAL); - break; + case OSC_SLCK_32K_XTAL: + pmc_switch_sclk_to_32kxtal(PMC_OSC_XTAL); + break; - case OSC_SLCK_32K_BYPASS: - pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS); - break; + case OSC_SLCK_32K_BYPASS: + pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS); + break; - case OSC_MAINCK_4M_RC: - pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz); - break; + case OSC_MAINCK_4M_RC: + pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz); + break; - case OSC_MAINCK_8M_RC: - pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_8_MHz); - break; + case OSC_MAINCK_8M_RC: + pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_8_MHz); + break; - case OSC_MAINCK_12M_RC: - pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz); - break; + case OSC_MAINCK_12M_RC: + pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz); + break; - case OSC_MAINCK_XTAL: - pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*, - pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US, - OSC_SLCK_32K_RC_HZ)*/); - break; + case OSC_MAINCK_XTAL: + pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*, + pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US, + OSC_SLCK_32K_RC_HZ)*/); + break; - case OSC_MAINCK_BYPASS: - pmc_switch_mainck_to_xtal(PMC_OSC_BYPASS/*, - pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US, - OSC_SLCK_32K_RC_HZ)*/); - break; - } + case OSC_MAINCK_BYPASS: + pmc_switch_mainck_to_xtal(PMC_OSC_BYPASS/*, + pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US, + OSC_SLCK_32K_RC_HZ)*/); + break; + } } -static inline void osc_disable(uint32_t ul_id) -{ - switch (ul_id) { - case OSC_SLCK_32K_RC: - case OSC_SLCK_32K_XTAL: - case OSC_SLCK_32K_BYPASS: - break; - - case OSC_MAINCK_4M_RC: - case OSC_MAINCK_8M_RC: - case OSC_MAINCK_12M_RC: - pmc_osc_disable_fastrc(); - break; - - case OSC_MAINCK_XTAL: - pmc_osc_disable_xtal(PMC_OSC_XTAL); - break; - - case OSC_MAINCK_BYPASS: - pmc_osc_disable_xtal(PMC_OSC_BYPASS); - break; - } +static inline void osc_disable(uint32_t ul_id) { + switch (ul_id) { + case OSC_SLCK_32K_RC: + case OSC_SLCK_32K_XTAL: + case OSC_SLCK_32K_BYPASS: + break; + + case OSC_MAINCK_4M_RC: + case OSC_MAINCK_8M_RC: + case OSC_MAINCK_12M_RC: + pmc_osc_disable_fastrc(); + break; + + case OSC_MAINCK_XTAL: + pmc_osc_disable_xtal(PMC_OSC_XTAL); + break; + + case OSC_MAINCK_BYPASS: + pmc_osc_disable_xtal(PMC_OSC_BYPASS); + break; + } } -static inline bool osc_is_ready(uint32_t ul_id) -{ - switch (ul_id) { - case OSC_SLCK_32K_RC: - return 1; - - case OSC_SLCK_32K_XTAL: - case OSC_SLCK_32K_BYPASS: - return pmc_osc_is_ready_32kxtal(); - - case OSC_MAINCK_4M_RC: - case OSC_MAINCK_8M_RC: - case OSC_MAINCK_12M_RC: - case OSC_MAINCK_XTAL: - case OSC_MAINCK_BYPASS: - return pmc_osc_is_ready_mainck(); - } - - return 0; +static inline bool osc_is_ready(uint32_t ul_id) { + switch (ul_id) { + case OSC_SLCK_32K_RC: + return 1; + + case OSC_SLCK_32K_XTAL: + case OSC_SLCK_32K_BYPASS: + return pmc_osc_is_ready_32kxtal(); + + case OSC_MAINCK_4M_RC: + case OSC_MAINCK_8M_RC: + case OSC_MAINCK_12M_RC: + case OSC_MAINCK_XTAL: + case OSC_MAINCK_BYPASS: + return pmc_osc_is_ready_mainck(); + } + + return 0; } -static inline uint32_t osc_get_rate(uint32_t ul_id) -{ - switch (ul_id) { - case OSC_SLCK_32K_RC: - return OSC_SLCK_32K_RC_HZ; +static inline uint32_t osc_get_rate(uint32_t ul_id) { + switch (ul_id) { + case OSC_SLCK_32K_RC: + return OSC_SLCK_32K_RC_HZ; - case OSC_SLCK_32K_XTAL: - return BOARD_FREQ_SLCK_XTAL; + case OSC_SLCK_32K_XTAL: + return BOARD_FREQ_SLCK_XTAL; - case OSC_SLCK_32K_BYPASS: - return BOARD_FREQ_SLCK_BYPASS; + case OSC_SLCK_32K_BYPASS: + return BOARD_FREQ_SLCK_BYPASS; - case OSC_MAINCK_4M_RC: - return OSC_MAINCK_4M_RC_HZ; + case OSC_MAINCK_4M_RC: + return OSC_MAINCK_4M_RC_HZ; - case OSC_MAINCK_8M_RC: - return OSC_MAINCK_8M_RC_HZ; + case OSC_MAINCK_8M_RC: + return OSC_MAINCK_8M_RC_HZ; - case OSC_MAINCK_12M_RC: - return OSC_MAINCK_12M_RC_HZ; + case OSC_MAINCK_12M_RC: + return OSC_MAINCK_12M_RC_HZ; - case OSC_MAINCK_XTAL: - return BOARD_FREQ_MAINCK_XTAL; + case OSC_MAINCK_XTAL: + return BOARD_FREQ_MAINCK_XTAL; - case OSC_MAINCK_BYPASS: - return BOARD_FREQ_MAINCK_BYPASS; - } + case OSC_MAINCK_BYPASS: + return BOARD_FREQ_MAINCK_BYPASS; + } - return 0; + return 0; } /** @@ -241,11 +237,10 @@ static inline uint32_t osc_get_rate(uint32_t ul_id) * * \param id A number identifying the oscillator to wait for. */ -static inline void osc_wait_ready(uint8_t id) -{ - while (!osc_is_ready(id)) { - /* Do nothing */ - } +static inline void osc_wait_ready(uint8_t id) { + while (!osc_is_ready(id)) { + /* Do nothing */ + } } //! @} diff --git a/Marlin/src/HAL/DUE/usb/pll.h b/Marlin/src/HAL/DUE/usb/pll.h index 8eaf27672b25..d25a1f65d09b 100644 --- a/Marlin/src/HAL/DUE/usb/pll.h +++ b/Marlin/src/HAL/DUE/usb/pll.h @@ -77,22 +77,22 @@ extern "C" { #define PLL_COUNT 0x3FU enum pll_source { - PLL_SRC_MAINCK_4M_RC = OSC_MAINCK_4M_RC, //!< Internal 4MHz RC oscillator. - PLL_SRC_MAINCK_8M_RC = OSC_MAINCK_8M_RC, //!< Internal 8MHz RC oscillator. - PLL_SRC_MAINCK_12M_RC = OSC_MAINCK_12M_RC, //!< Internal 12MHz RC oscillator. - PLL_SRC_MAINCK_XTAL = OSC_MAINCK_XTAL, //!< External crystal oscillator. - PLL_SRC_MAINCK_BYPASS = OSC_MAINCK_BYPASS, //!< External bypass oscillator. - PLL_NR_SOURCES, //!< Number of PLL sources. + PLL_SRC_MAINCK_4M_RC = OSC_MAINCK_4M_RC, //!< Internal 4MHz RC oscillator. + PLL_SRC_MAINCK_8M_RC = OSC_MAINCK_8M_RC, //!< Internal 8MHz RC oscillator. + PLL_SRC_MAINCK_12M_RC = OSC_MAINCK_12M_RC, //!< Internal 12MHz RC oscillator. + PLL_SRC_MAINCK_XTAL = OSC_MAINCK_XTAL, //!< External crystal oscillator. + PLL_SRC_MAINCK_BYPASS = OSC_MAINCK_BYPASS, //!< External bypass oscillator. + PLL_NR_SOURCES, //!< Number of PLL sources. }; struct pll_config { - uint32_t ctrl; + uint32_t ctrl; }; #define pll_get_default_rate(pll_id) \ - ((osc_get_rate(CONFIG_PLL##pll_id##_SOURCE) \ - * CONFIG_PLL##pll_id##_MUL) \ - / CONFIG_PLL##pll_id##_DIV) + ((osc_get_rate(CONFIG_PLL##pll_id##_SOURCE) \ + * CONFIG_PLL##pll_id##_MUL) \ + / CONFIG_PLL##pll_id##_DIV) /* Force UTMI PLL parameters (Hardware defined) */ #ifdef CONFIG_PLL1_SOURCE @@ -113,145 +113,130 @@ struct pll_config { * is hidden in this implementation. Use mul as mul effective value. */ static inline void pll_config_init(struct pll_config *p_cfg, - enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul) -{ - uint32_t vco_hz; - - Assert(e_src < PLL_NR_SOURCES); - - if (ul_div == 0 && ul_mul == 0) { /* Must only be true for UTMI PLL */ - p_cfg->ctrl = CKGR_UCKR_UPLLCOUNT(PLL_COUNT); - } else { /* PLLA */ - /* Calculate internal VCO frequency */ - vco_hz = osc_get_rate(e_src) / ul_div; - Assert(vco_hz >= PLL_INPUT_MIN_HZ); - Assert(vco_hz <= PLL_INPUT_MAX_HZ); - - vco_hz *= ul_mul; - Assert(vco_hz >= PLL_OUTPUT_MIN_HZ); - Assert(vco_hz <= PLL_OUTPUT_MAX_HZ); - - /* PMC hardware will automatically make it mul+1 */ - p_cfg->ctrl = CKGR_PLLAR_MULA(ul_mul - 1) | CKGR_PLLAR_DIVA(ul_div) | CKGR_PLLAR_PLLACOUNT(PLL_COUNT); - } + enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul) { + uint32_t vco_hz; + + Assert(e_src < PLL_NR_SOURCES); + + if (ul_div == 0 && ul_mul == 0) { /* Must only be true for UTMI PLL */ + p_cfg->ctrl = CKGR_UCKR_UPLLCOUNT(PLL_COUNT); + } + else { /* PLLA */ + /* Calculate internal VCO frequency */ + vco_hz = osc_get_rate(e_src) / ul_div; + Assert(vco_hz >= PLL_INPUT_MIN_HZ); + Assert(vco_hz <= PLL_INPUT_MAX_HZ); + + vco_hz *= ul_mul; + Assert(vco_hz >= PLL_OUTPUT_MIN_HZ); + Assert(vco_hz <= PLL_OUTPUT_MAX_HZ); + + /* PMC hardware will automatically make it mul+1 */ + p_cfg->ctrl = CKGR_PLLAR_MULA(ul_mul - 1) | CKGR_PLLAR_DIVA(ul_div) | CKGR_PLLAR_PLLACOUNT(PLL_COUNT); + } } -#define pll_config_defaults(cfg, pll_id) \ - pll_config_init(cfg, \ - CONFIG_PLL##pll_id##_SOURCE, \ - CONFIG_PLL##pll_id##_DIV, \ - CONFIG_PLL##pll_id##_MUL) - -static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id) -{ - Assert(ul_pll_id < NR_PLLS); - - if (ul_pll_id == PLLA_ID) { - p_cfg->ctrl = PMC->CKGR_PLLAR; - } else { - p_cfg->ctrl = PMC->CKGR_UCKR; - } +#define pll_config_defaults(cfg, pll_id) \ + pll_config_init(cfg, \ + CONFIG_PLL##pll_id##_SOURCE, \ + CONFIG_PLL##pll_id##_DIV, \ + CONFIG_PLL##pll_id##_MUL) + +static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id) { + Assert(ul_pll_id < NR_PLLS); + p_cfg->ctrl = ul_pll_id == PLLA_ID ? PMC->CKGR_PLLAR : PMC->CKGR_UCKR; } -static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id) -{ - Assert(ul_pll_id < NR_PLLS); +static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id) { + Assert(ul_pll_id < NR_PLLS); - if (ul_pll_id == PLLA_ID) { - pmc_disable_pllack(); // Always stop PLL first! - PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl; - } else { - PMC->CKGR_UCKR = p_cfg->ctrl; - } + if (ul_pll_id == PLLA_ID) { + pmc_disable_pllack(); // Always stop PLL first! + PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl; + } + else + PMC->CKGR_UCKR = p_cfg->ctrl; } -static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id) -{ - Assert(ul_pll_id < NR_PLLS); +static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id) { + Assert(ul_pll_id < NR_PLLS); - if (ul_pll_id == PLLA_ID) { - pmc_disable_pllack(); // Always stop PLL first! - PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl; - } else { - PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN; - } + if (ul_pll_id == PLLA_ID) { + pmc_disable_pllack(); // Always stop PLL first! + PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl; + } + else + PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN; } /** * \note This will only disable the selected PLL, not the underlying oscillator (mainck). */ -static inline void pll_disable(uint32_t ul_pll_id) -{ - Assert(ul_pll_id < NR_PLLS); - - if (ul_pll_id == PLLA_ID) { - pmc_disable_pllack(); - } else { - PMC->CKGR_UCKR &= ~CKGR_UCKR_UPLLEN; - } +static inline void pll_disable(uint32_t ul_pll_id) { + Assert(ul_pll_id < NR_PLLS); + + if (ul_pll_id == PLLA_ID) + pmc_disable_pllack(); + else + PMC->CKGR_UCKR &= ~CKGR_UCKR_UPLLEN; } -static inline uint32_t pll_is_locked(uint32_t ul_pll_id) -{ - Assert(ul_pll_id < NR_PLLS); +static inline uint32_t pll_is_locked(uint32_t ul_pll_id) { + Assert(ul_pll_id < NR_PLLS); - if (ul_pll_id == PLLA_ID) { - return pmc_is_locked_pllack(); - } else { - return pmc_is_locked_upll(); - } + if (ul_pll_id == PLLA_ID) + return pmc_is_locked_pllack(); + else + return pmc_is_locked_upll(); } -static inline void pll_enable_source(enum pll_source e_src) -{ - switch (e_src) { - case PLL_SRC_MAINCK_4M_RC: - case PLL_SRC_MAINCK_8M_RC: - case PLL_SRC_MAINCK_12M_RC: - case PLL_SRC_MAINCK_XTAL: - case PLL_SRC_MAINCK_BYPASS: - osc_enable(e_src); - osc_wait_ready(e_src); - break; - - default: - Assert(false); - break; - } +static inline void pll_enable_source(enum pll_source e_src) { + switch (e_src) { + case PLL_SRC_MAINCK_4M_RC: + case PLL_SRC_MAINCK_8M_RC: + case PLL_SRC_MAINCK_12M_RC: + case PLL_SRC_MAINCK_XTAL: + case PLL_SRC_MAINCK_BYPASS: + osc_enable(e_src); + osc_wait_ready(e_src); + break; + + default: + Assert(false); + break; + } } -static inline void pll_enable_config_defaults(unsigned int ul_pll_id) -{ - struct pll_config pllcfg; - - if (pll_is_locked(ul_pll_id)) { - return; // Pll already running - } - switch (ul_pll_id) { -#ifdef CONFIG_PLL0_SOURCE - case 0: - pll_enable_source(CONFIG_PLL0_SOURCE); - pll_config_init(&pllcfg, - CONFIG_PLL0_SOURCE, - CONFIG_PLL0_DIV, - CONFIG_PLL0_MUL); - break; -#endif -#ifdef CONFIG_PLL1_SOURCE - case 1: - pll_enable_source(CONFIG_PLL1_SOURCE); - pll_config_init(&pllcfg, - CONFIG_PLL1_SOURCE, - CONFIG_PLL1_DIV, - CONFIG_PLL1_MUL); - break; -#endif - default: - Assert(false); - break; - } - pll_enable(&pllcfg, ul_pll_id); - while (!pll_is_locked(ul_pll_id)); +static inline void pll_enable_config_defaults(unsigned int ul_pll_id) { + struct pll_config pllcfg; + + if (pll_is_locked(ul_pll_id)) return; // Pll already running + + switch (ul_pll_id) { + #ifdef CONFIG_PLL0_SOURCE + case 0: + pll_enable_source(CONFIG_PLL0_SOURCE); + pll_config_init(&pllcfg, + CONFIG_PLL0_SOURCE, + CONFIG_PLL0_DIV, + CONFIG_PLL0_MUL); + break; + #endif + #ifdef CONFIG_PLL1_SOURCE + case 1: + pll_enable_source(CONFIG_PLL1_SOURCE); + pll_config_init(&pllcfg, + CONFIG_PLL1_SOURCE, + CONFIG_PLL1_DIV, + CONFIG_PLL1_MUL); + break; + #endif + default: + Assert(false); + break; + } + pll_enable(&pllcfg, ul_pll_id); + while (!pll_is_locked(ul_pll_id)); } /** @@ -264,15 +249,12 @@ static inline void pll_enable_config_defaults(unsigned int ul_pll_id) * \retval STATUS_OK The PLL is now locked. * \retval ERR_TIMEOUT Timed out waiting for PLL to become locked. */ -static inline int pll_wait_for_lock(unsigned int pll_id) -{ - Assert(pll_id < NR_PLLS); +static inline int pll_wait_for_lock(unsigned int pll_id) { + Assert(pll_id < NR_PLLS); - while (!pll_is_locked(pll_id)) { - /* Do nothing */ - } + while (!pll_is_locked(pll_id)) { /* Do nothing */ } - return 0; + return 0; } //! @} diff --git a/Marlin/src/HAL/DUE/usb/sbc_protocol.h b/Marlin/src/HAL/DUE/usb/sbc_protocol.h index ab845739fd48..983ec7adca1c 100644 --- a/Marlin/src/HAL/DUE/usb/sbc_protocol.h +++ b/Marlin/src/HAL/DUE/usb/sbc_protocol.h @@ -57,7 +57,6 @@ #ifndef _SBC_PROTOCOL_H_ #define _SBC_PROTOCOL_H_ - /** * \ingroup usb_msc_protocol * \defgroup usb_sbc_protocol SCSI Block Commands protocol definitions @@ -81,82 +80,82 @@ //@{ enum scsi_sbc_mode { - SCSI_MS_MODE_RW_ERR_RECOV = 0x01, //!< Read-Write Error Recovery mode page - SCSI_MS_MODE_FORMAT_DEVICE = 0x03, //!< Format Device mode page - SCSI_MS_MODE_FLEXIBLE_DISK = 0x05, //!< Flexible Disk mode page - SCSI_MS_MODE_CACHING = 0x08, //!< Caching mode page + SCSI_MS_MODE_RW_ERR_RECOV = 0x01, //!< Read-Write Error Recovery mode page + SCSI_MS_MODE_FORMAT_DEVICE = 0x03, //!< Format Device mode page + SCSI_MS_MODE_FLEXIBLE_DISK = 0x05, //!< Flexible Disk mode page + SCSI_MS_MODE_CACHING = 0x08, //!< Caching mode page }; //! \name SBC-2 Device-Specific Parameter //@{ -#define SCSI_MS_SBC_WP 0x80 //!< Write Protected -#define SCSI_MS_SBC_DPOFUA 0x10 //!< DPO and FUA supported +#define SCSI_MS_SBC_WP 0x80 //!< Write Protected +#define SCSI_MS_SBC_DPOFUA 0x10 //!< DPO and FUA supported //@} /** * \brief SBC-2 Short LBA mode parameter block descriptor */ struct sbc_slba_block_desc { - be32_t nr_blocks; //!< Number of Blocks - be32_t block_len; //!< Block Length -#define SBC_SLBA_BLOCK_LEN_MASK 0x00FFFFFFU //!< Mask reserved bits + be32_t nr_blocks; //!< Number of Blocks + be32_t block_len; //!< Block Length +#define SBC_SLBA_BLOCK_LEN_MASK 0x00FFFFFFU //!< Mask reserved bits }; /** * \brief SBC-2 Caching mode page */ struct sbc_caching_mode_page { - uint8_t page_code; - uint8_t page_length; - uint8_t flags2; -#define SBC_MP_CACHE_IC (1 << 7) //!< Initiator Control -#define SBC_MP_CACHE_ABPF (1 << 6) //!< Abort Pre-Fetch -#define SBC_MP_CACHE_CAP (1 << 5) //!< Catching Analysis Permitted -#define SBC_MP_CACHE_DISC (1 << 4) //!< Discontinuity -#define SBC_MP_CACHE_SIZE (1 << 3) //!< Size enable -#define SBC_MP_CACHE_WCE (1 << 2) //!< Write back Cache Enable -#define SBC_MP_CACHE_MF (1 << 1) //!< Multiplication Factor -#define SBC_MP_CACHE_RCD (1 << 0) //!< Read Cache Disable - uint8_t retention; - be16_t dis_pf_transfer_len; - be16_t min_prefetch; - be16_t max_prefetch; - be16_t max_prefetch_ceil; - uint8_t flags12; -#define SBC_MP_CACHE_FSW (1 << 7) //!< Force Sequential Write -#define SBC_MP_CACHE_LBCSS (1 << 6) //!< Logical Blk Cache Seg Sz -#define SBC_MP_CACHE_DRA (1 << 5) //!< Disable Read-Ahead -#define SBC_MP_CACHE_NV_DIS (1 << 0) //!< Non-Volatile Cache Disable - uint8_t nr_cache_segments; - be16_t cache_segment_size; - uint8_t reserved[4]; + uint8_t page_code; + uint8_t page_length; + uint8_t flags2; +#define SBC_MP_CACHE_IC (1 << 7) //!< Initiator Control +#define SBC_MP_CACHE_ABPF (1 << 6) //!< Abort Pre-Fetch +#define SBC_MP_CACHE_CAP (1 << 5) //!< Catching Analysis Permitted +#define SBC_MP_CACHE_DISC (1 << 4) //!< Discontinuity +#define SBC_MP_CACHE_SIZE (1 << 3) //!< Size enable +#define SBC_MP_CACHE_WCE (1 << 2) //!< Write back Cache Enable +#define SBC_MP_CACHE_MF (1 << 1) //!< Multiplication Factor +#define SBC_MP_CACHE_RCD (1 << 0) //!< Read Cache Disable + uint8_t retention; + be16_t dis_pf_transfer_len; + be16_t min_prefetch; + be16_t max_prefetch; + be16_t max_prefetch_ceil; + uint8_t flags12; +#define SBC_MP_CACHE_FSW (1 << 7) //!< Force Sequential Write +#define SBC_MP_CACHE_LBCSS (1 << 6) //!< Logical Blk Cache Seg Sz +#define SBC_MP_CACHE_DRA (1 << 5) //!< Disable Read-Ahead +#define SBC_MP_CACHE_NV_DIS (1 << 0) //!< Non-Volatile Cache Disable + uint8_t nr_cache_segments; + be16_t cache_segment_size; + uint8_t reserved[4]; }; /** * \brief SBC-2 Read-Write Error Recovery mode page */ struct sbc_rdwr_error_recovery_mode_page { - uint8_t page_code; - uint8_t page_length; -#define SPC_MP_RW_ERR_RECOV_PAGE_LENGTH 0x0A - uint8_t flags1; -#define SBC_MP_RW_ERR_RECOV_AWRE (1 << 7) -#define SBC_MP_RW_ERR_RECOV_ARRE (1 << 6) -#define SBC_MP_RW_ERR_RECOV_TB (1 << 5) -#define SBC_MP_RW_ERR_RECOV_RC (1 << 4) -#define SBC_MP_RW_ERR_RECOV_ERR (1 << 3) -#define SBC_MP_RW_ERR_RECOV_PER (1 << 2) -#define SBC_MP_RW_ERR_RECOV_DTE (1 << 1) -#define SBC_MP_RW_ERR_RECOV_DCR (1 << 0) - uint8_t read_retry_count; - uint8_t correction_span; - uint8_t head_offset_count; - uint8_t data_strobe_offset_count; - uint8_t flags2; - uint8_t write_retry_count; - uint8_t flags3; - be16_t recovery_time_limit; + uint8_t page_code; + uint8_t page_length; + #define SPC_MP_RW_ERR_RECOV_PAGE_LENGTH 0x0A + uint8_t flags1; + #define SBC_MP_RW_ERR_RECOV_AWRE (1 << 7) + #define SBC_MP_RW_ERR_RECOV_ARRE (1 << 6) + #define SBC_MP_RW_ERR_RECOV_TB (1 << 5) + #define SBC_MP_RW_ERR_RECOV_RC (1 << 4) + #define SBC_MP_RW_ERR_RECOV_ERR (1 << 3) + #define SBC_MP_RW_ERR_RECOV_PER (1 << 2) + #define SBC_MP_RW_ERR_RECOV_DTE (1 << 1) + #define SBC_MP_RW_ERR_RECOV_DCR (1 << 0) + uint8_t read_retry_count; + uint8_t correction_span; + uint8_t head_offset_count; + uint8_t data_strobe_offset_count; + uint8_t flags2; + uint8_t write_retry_count; + uint8_t flags3; + be16_t recovery_time_limit; }; //@} @@ -164,8 +163,8 @@ struct sbc_rdwr_error_recovery_mode_page { * \brief SBC-2 READ CAPACITY (10) parameter data */ struct sbc_read_capacity10_data { - be32_t max_lba; //!< LBA of last logical block - be32_t block_len; //!< Number of bytes in the last logical block + be32_t max_lba; //!< LBA of last logical block + be32_t block_len; //!< Number of bytes in the last logical block }; //@} diff --git a/Marlin/src/HAL/DUE/usb/spc_protocol.h b/Marlin/src/HAL/DUE/usb/spc_protocol.h index d67cc5c78803..808c388f4fc4 100644 --- a/Marlin/src/HAL/DUE/usb/spc_protocol.h +++ b/Marlin/src/HAL/DUE/usb/spc_protocol.h @@ -59,23 +59,23 @@ //! \name SCSI commands defined by SPC-2 //@{ -#define SPC_TEST_UNIT_READY 0x00 -#define SPC_REQUEST_SENSE 0x03 -#define SPC_INQUIRY 0x12 -#define SPC_MODE_SELECT6 0x15 -#define SPC_MODE_SENSE6 0x1A -#define SPC_SEND_DIAGNOSTIC 0x1D -#define SPC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E -#define SPC_MODE_SENSE10 0x5A -#define SPC_REPORT_LUNS 0xA0 +#define SPC_TEST_UNIT_READY 0x00 +#define SPC_REQUEST_SENSE 0x03 +#define SPC_INQUIRY 0x12 +#define SPC_MODE_SELECT6 0x15 +#define SPC_MODE_SENSE6 0x1A +#define SPC_SEND_DIAGNOSTIC 0x1D +#define SPC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E +#define SPC_MODE_SENSE10 0x5A +#define SPC_REPORT_LUNS 0xA0 //@} //! \brief May be set in byte 0 of the INQUIRY CDB //@{ //! Enable Vital Product Data -#define SCSI_INQ_REQ_EVPD 0x01 +#define SCSI_INQ_REQ_EVPD 0x01 //! Command Support Data specified by the PAGE OR OPERATION CODE field -#define SCSI_INQ_REQ_CMDT 0x02 +#define SCSI_INQ_REQ_CMDT 0x02 //@} COMPILER_PACK_SET(1) @@ -84,110 +84,110 @@ COMPILER_PACK_SET(1) * \brief SCSI Standard Inquiry data structure */ struct scsi_inquiry_data { - uint8_t pq_pdt; //!< Peripheral Qual / Peripheral Dev Type -#define SCSI_INQ_PQ_CONNECTED 0x00 //!< Peripheral connected -#define SCSI_INQ_PQ_NOT_CONN 0x20 //!< Peripheral not connected -#define SCSI_INQ_PQ_NOT_SUPP 0x60 //!< Peripheral not supported -#define SCSI_INQ_DT_DIR_ACCESS 0x00 //!< Direct Access (SBC) -#define SCSI_INQ_DT_SEQ_ACCESS 0x01 //!< Sequential Access -#define SCSI_INQ_DT_PRINTER 0x02 //!< Printer -#define SCSI_INQ_DT_PROCESSOR 0x03 //!< Processor device -#define SCSI_INQ_DT_WRITE_ONCE 0x04 //!< Write-once device -#define SCSI_INQ_DT_CD_DVD 0x05 //!< CD/DVD device -#define SCSI_INQ_DT_OPTICAL 0x07 //!< Optical Memory -#define SCSI_INQ_DT_MC 0x08 //!< Medium Changer -#define SCSI_INQ_DT_ARRAY 0x0C //!< Storage Array Controller -#define SCSI_INQ_DT_ENCLOSURE 0x0D //!< Enclosure Services -#define SCSI_INQ_DT_RBC 0x0E //!< Simplified Direct Access -#define SCSI_INQ_DT_OCRW 0x0F //!< Optical card reader/writer -#define SCSI_INQ_DT_BCC 0x10 //!< Bridge Controller Commands -#define SCSI_INQ_DT_OSD 0x11 //!< Object-based Storage -#define SCSI_INQ_DT_NONE 0x1F //!< No Peripheral - uint8_t flags1; //!< Flags (byte 1) -#define SCSI_INQ_RMB 0x80 //!< Removable Medium - uint8_t version; //!< Version -#define SCSI_INQ_VER_NONE 0x00 //!< No standards conformance -#define SCSI_INQ_VER_SPC 0x03 //!< SCSI Primary Commands (link to SBC) -#define SCSI_INQ_VER_SPC2 0x04 //!< SCSI Primary Commands - 2 (link to SBC-2) -#define SCSI_INQ_VER_SPC3 0x05 //!< SCSI Primary Commands - 3 (link to SBC-2) -#define SCSI_INQ_VER_SPC4 0x06 //!< SCSI Primary Commands - 4 (link to SBC-3) - uint8_t flags3; //!< Flags (byte 3) -#define SCSI_INQ_NORMACA 0x20 //!< Normal ACA Supported -#define SCSI_INQ_HISUP 0x10 //!< Hierarchal LUN addressing -#define SCSI_INQ_RSP_SPC2 0x02 //!< SPC-2 / SPC-3 response format - uint8_t addl_len; //!< Additional Length (n-4) -#define SCSI_INQ_ADDL_LEN(tot) ((tot)-5) //!< Total length is \a tot - uint8_t flags5; //!< Flags (byte 5) -#define SCSI_INQ_SCCS 0x80 - uint8_t flags6; //!< Flags (byte 6) -#define SCSI_INQ_BQUE 0x80 -#define SCSI_INQ_ENCSERV 0x40 -#define SCSI_INQ_MULTIP 0x10 -#define SCSI_INQ_MCHGR 0x08 -#define SCSI_INQ_ADDR16 0x01 - uint8_t flags7; //!< Flags (byte 7) -#define SCSI_INQ_WBUS16 0x20 -#define SCSI_INQ_SYNC 0x10 -#define SCSI_INQ_LINKED 0x08 -#define SCSI_INQ_CMDQUE 0x02 - uint8_t vendor_id[8]; //!< T10 Vendor Identification - uint8_t product_id[16]; //!< Product Identification - uint8_t product_rev[4]; //!< Product Revision Level + uint8_t pq_pdt; //!< Peripheral Qual / Peripheral Dev Type + #define SCSI_INQ_PQ_CONNECTED 0x00 //!< Peripheral connected + #define SCSI_INQ_PQ_NOT_CONN 0x20 //!< Peripheral not connected + #define SCSI_INQ_PQ_NOT_SUPP 0x60 //!< Peripheral not supported + #define SCSI_INQ_DT_DIR_ACCESS 0x00 //!< Direct Access (SBC) + #define SCSI_INQ_DT_SEQ_ACCESS 0x01 //!< Sequential Access + #define SCSI_INQ_DT_PRINTER 0x02 //!< Printer + #define SCSI_INQ_DT_PROCESSOR 0x03 //!< Processor device + #define SCSI_INQ_DT_WRITE_ONCE 0x04 //!< Write-once device + #define SCSI_INQ_DT_CD_DVD 0x05 //!< CD/DVD device + #define SCSI_INQ_DT_OPTICAL 0x07 //!< Optical Memory + #define SCSI_INQ_DT_MC 0x08 //!< Medium Changer + #define SCSI_INQ_DT_ARRAY 0x0C //!< Storage Array Controller + #define SCSI_INQ_DT_ENCLOSURE 0x0D //!< Enclosure Services + #define SCSI_INQ_DT_RBC 0x0E //!< Simplified Direct Access + #define SCSI_INQ_DT_OCRW 0x0F //!< Optical card reader/writer + #define SCSI_INQ_DT_BCC 0x10 //!< Bridge Controller Commands + #define SCSI_INQ_DT_OSD 0x11 //!< Object-based Storage + #define SCSI_INQ_DT_NONE 0x1F //!< No Peripheral + uint8_t flags1; //!< Flags (byte 1) + #define SCSI_INQ_RMB 0x80 //!< Removable Medium + uint8_t version; //!< Version + #define SCSI_INQ_VER_NONE 0x00 //!< No standards conformance + #define SCSI_INQ_VER_SPC 0x03 //!< SCSI Primary Commands (link to SBC) + #define SCSI_INQ_VER_SPC2 0x04 //!< SCSI Primary Commands - 2 (link to SBC-2) + #define SCSI_INQ_VER_SPC3 0x05 //!< SCSI Primary Commands - 3 (link to SBC-2) + #define SCSI_INQ_VER_SPC4 0x06 //!< SCSI Primary Commands - 4 (link to SBC-3) + uint8_t flags3; //!< Flags (byte 3) + #define SCSI_INQ_NORMACA 0x20 //!< Normal ACA Supported + #define SCSI_INQ_HISUP 0x10 //!< Hierarchal LUN addressing + #define SCSI_INQ_RSP_SPC2 0x02 //!< SPC-2 / SPC-3 response format + uint8_t addl_len; //!< Additional Length (n-4) + #define SCSI_INQ_ADDL_LEN(tot) ((tot)-5) //!< Total length is \a tot + uint8_t flags5; //!< Flags (byte 5) + #define SCSI_INQ_SCCS 0x80 + uint8_t flags6; //!< Flags (byte 6) + #define SCSI_INQ_BQUE 0x80 + #define SCSI_INQ_ENCSERV 0x40 + #define SCSI_INQ_MULTIP 0x10 + #define SCSI_INQ_MCHGR 0x08 + #define SCSI_INQ_ADDR16 0x01 + uint8_t flags7; //!< Flags (byte 7) + #define SCSI_INQ_WBUS16 0x20 + #define SCSI_INQ_SYNC 0x10 + #define SCSI_INQ_LINKED 0x08 + #define SCSI_INQ_CMDQUE 0x02 + uint8_t vendor_id[8]; //!< T10 Vendor Identification + uint8_t product_id[16]; //!< Product Identification + uint8_t product_rev[4]; //!< Product Revision Level }; /** * \brief SCSI Standard Request sense data structure */ struct scsi_request_sense_data { - /* 1st byte: REQUEST SENSE response flags*/ - uint8_t valid_reponse_code; -#define SCSI_SENSE_VALID 0x80 //!< Indicates the INFORMATION field contains valid information -#define SCSI_SENSE_RESPONSE_CODE_MASK 0x7F -#define SCSI_SENSE_CURRENT 0x70 //!< Response code 70h (current errors) -#define SCSI_SENSE_DEFERRED 0x71 - - /* 2nd byte */ - uint8_t obsolete; - - /* 3rd byte */ - uint8_t sense_flag_key; -#define SCSI_SENSE_FILEMARK 0x80 //!< Indicates that the current command has read a filemark or setmark. -#define SCSI_SENSE_EOM 0x40 //!< Indicates that an end-of-medium condition exists. -#define SCSI_SENSE_ILI 0x20 //!< Indicates that the requested logical block length did not match the logical block length of the data on the medium. -#define SCSI_SENSE_RESERVED 0x10 //!< Reserved -#define SCSI_SENSE_KEY(x) (x&0x0F) //!< Sense Key - - /* 4th to 7th bytes - INFORMATION field */ - uint8_t information[4]; - - /* 8th byte - ADDITIONAL SENSE LENGTH field */ - uint8_t AddSenseLen; -#define SCSI_SENSE_ADDL_LEN(total_len) ((total_len) - 8) - - /* 9th to 12th byte - COMMAND-SPECIFIC INFORMATION field */ - uint8_t CmdSpecINFO[4]; - - /* 13th byte - ADDITIONAL SENSE CODE field */ - uint8_t AddSenseCode; - - /* 14th byte - ADDITIONAL SENSE CODE QUALIFIER field */ - uint8_t AddSnsCodeQlfr; - - /* 15th byte - FIELD REPLACEABLE UNIT CODE field */ - uint8_t FldReplUnitCode; - - /* 16th byte */ - uint8_t SenseKeySpec[3]; -#define SCSI_SENSE_SKSV 0x80 //!< Indicates the SENSE-KEY SPECIFIC field contains valid information + /* 1st byte: REQUEST SENSE response flags*/ + uint8_t valid_reponse_code; + #define SCSI_SENSE_VALID 0x80 //!< Indicates the INFORMATION field contains valid information + #define SCSI_SENSE_RESPONSE_CODE_MASK 0x7F + #define SCSI_SENSE_CURRENT 0x70 //!< Response code 70h (current errors) + #define SCSI_SENSE_DEFERRED 0x71 + + /* 2nd byte */ + uint8_t obsolete; + + /* 3rd byte */ + uint8_t sense_flag_key; + #define SCSI_SENSE_FILEMARK 0x80 //!< Indicates that the current command has read a filemark or setmark. + #define SCSI_SENSE_EOM 0x40 //!< Indicates that an end-of-medium condition exists. + #define SCSI_SENSE_ILI 0x20 //!< Indicates that the requested logical block length did not match the logical block length of the data on the medium. + #define SCSI_SENSE_RESERVED 0x10 //!< Reserved + #define SCSI_SENSE_KEY(x) (x&0x0F) //!< Sense Key + + /* 4th to 7th bytes - INFORMATION field */ + uint8_t information[4]; + + /* 8th byte - ADDITIONAL SENSE LENGTH field */ + uint8_t AddSenseLen; + #define SCSI_SENSE_ADDL_LEN(total_len) ((total_len) - 8) + + /* 9th to 12th byte - COMMAND-SPECIFIC INFORMATION field */ + uint8_t CmdSpecINFO[4]; + + /* 13th byte - ADDITIONAL SENSE CODE field */ + uint8_t AddSenseCode; + + /* 14th byte - ADDITIONAL SENSE CODE QUALIFIER field */ + uint8_t AddSnsCodeQlfr; + + /* 15th byte - FIELD REPLACEABLE UNIT CODE field */ + uint8_t FldReplUnitCode; + + /* 16th byte */ + uint8_t SenseKeySpec[3]; + #define SCSI_SENSE_SKSV 0x80 //!< Indicates the SENSE-KEY SPECIFIC field contains valid information }; COMPILER_PACK_RESET() /* Vital Product Data page codes */ enum scsi_vpd_page_code { - SCSI_VPD_SUPPORTED_PAGES = 0x00, - SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80, - SCSI_VPD_DEVICE_IDENTIFICATION = 0x83, + SCSI_VPD_SUPPORTED_PAGES = 0x00, + SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80, + SCSI_VPD_DEVICE_IDENTIFICATION = 0x83, }; #define SCSI_VPD_HEADER_SIZE 4 @@ -200,37 +200,36 @@ enum scsi_vpd_page_code { #define SCSI_VPD_ID_TYPE_T10 1 - /* Sense keys */ enum scsi_sense_key { - SCSI_SK_NO_SENSE = 0x0, - SCSI_SK_RECOVERED_ERROR = 0x1, - SCSI_SK_NOT_READY = 0x2, - SCSI_SK_MEDIUM_ERROR = 0x3, - SCSI_SK_HARDWARE_ERROR = 0x4, - SCSI_SK_ILLEGAL_REQUEST = 0x5, - SCSI_SK_UNIT_ATTENTION = 0x6, - SCSI_SK_DATA_PROTECT = 0x7, - SCSI_SK_BLANK_CHECK = 0x8, - SCSI_SK_VENDOR_SPECIFIC = 0x9, - SCSI_SK_COPY_ABORTED = 0xA, - SCSI_SK_ABORTED_COMMAND = 0xB, - SCSI_SK_VOLUME_OVERFLOW = 0xD, - SCSI_SK_MISCOMPARE = 0xE, + SCSI_SK_NO_SENSE = 0x0, + SCSI_SK_RECOVERED_ERROR = 0x1, + SCSI_SK_NOT_READY = 0x2, + SCSI_SK_MEDIUM_ERROR = 0x3, + SCSI_SK_HARDWARE_ERROR = 0x4, + SCSI_SK_ILLEGAL_REQUEST = 0x5, + SCSI_SK_UNIT_ATTENTION = 0x6, + SCSI_SK_DATA_PROTECT = 0x7, + SCSI_SK_BLANK_CHECK = 0x8, + SCSI_SK_VENDOR_SPECIFIC = 0x9, + SCSI_SK_COPY_ABORTED = 0xA, + SCSI_SK_ABORTED_COMMAND = 0xB, + SCSI_SK_VOLUME_OVERFLOW = 0xD, + SCSI_SK_MISCOMPARE = 0xE, }; /* Additional Sense Code / Additional Sense Code Qualifier pairs */ enum scsi_asc_ascq { - SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000, - SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405, - SCSI_ASC_WRITE_ERROR = 0x0C00, - SCSI_ASC_UNRECOVERED_READ_ERROR = 0x1100, - SCSI_ASC_INVALID_COMMAND_OPERATION_CODE = 0x2000, - SCSI_ASC_INVALID_FIELD_IN_CDB = 0x2400, - SCSI_ASC_WRITE_PROTECTED = 0x2700, - SCSI_ASC_NOT_READY_TO_READY_CHANGE = 0x2800, - SCSI_ASC_MEDIUM_NOT_PRESENT = 0x3A00, - SCSI_ASC_INTERNAL_TARGET_FAILURE = 0x4400, + SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000, + SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405, + SCSI_ASC_WRITE_ERROR = 0x0C00, + SCSI_ASC_UNRECOVERED_READ_ERROR = 0x1100, + SCSI_ASC_INVALID_COMMAND_OPERATION_CODE = 0x2000, + SCSI_ASC_INVALID_FIELD_IN_CDB = 0x2400, + SCSI_ASC_WRITE_PROTECTED = 0x2700, + SCSI_ASC_NOT_READY_TO_READY_CHANGE = 0x2800, + SCSI_ASC_MEDIUM_NOT_PRESENT = 0x3A00, + SCSI_ASC_INTERNAL_TARGET_FAILURE = 0x4400, }; /** @@ -240,9 +239,9 @@ enum scsi_asc_ascq { * that are applicable to all SCSI devices. */ enum scsi_spc_mode { - SCSI_MS_MODE_VENDOR_SPEC = 0x00, - SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page - SCSI_MS_MODE_ALL = 0x3F, + SCSI_MS_MODE_VENDOR_SPEC = 0x00, + SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page + SCSI_MS_MODE_ALL = 0x3F, }; /** @@ -250,51 +249,45 @@ enum scsi_spc_mode { * See chapter 8.3.8 */ struct spc_control_page_info_execpt { - uint8_t page_code; - uint8_t page_length; -#define SPC_MP_INFEXP_PAGE_LENGTH 0x0A - uint8_t flags1; -#define SPC_MP_INFEXP_PERF (1<<7) //!< Initiator Control -#define SPC_MP_INFEXP_EBF (1<<5) //!< Caching Analysis Permitted -#define SPC_MP_INFEXP_EWASC (1<<4) //!< Discontinuity -#define SPC_MP_INFEXP_DEXCPT (1<<3) //!< Size enable -#define SPC_MP_INFEXP_TEST (1<<2) //!< Writeback Cache Enable -#define SPC_MP_INFEXP_LOGERR (1<<0) //!< Log errors bit - uint8_t mrie; -#define SPC_MP_INFEXP_MRIE_NO_REPORT 0x00 -#define SPC_MP_INFEXP_MRIE_ASYNC_EVENT 0x01 -#define SPC_MP_INFEXP_MRIE_GEN_UNIT 0x02 -#define SPC_MP_INFEXP_MRIE_COND_RECOV_ERROR 0x03 -#define SPC_MP_INFEXP_MRIE_UNCOND_RECOV_ERROR 0x04 -#define SPC_MP_INFEXP_MRIE_NO_SENSE 0x05 -#define SPC_MP_INFEXP_MRIE_ONLY_REPORT 0x06 - be32_t interval_timer; - be32_t report_count; + uint8_t page_code; + uint8_t page_length; + #define SPC_MP_INFEXP_PAGE_LENGTH 0x0A + uint8_t flags1; + #define SPC_MP_INFEXP_PERF (1<<7) //!< Initiator Control + #define SPC_MP_INFEXP_EBF (1<<5) //!< Caching Analysis Permitted + #define SPC_MP_INFEXP_EWASC (1<<4) //!< Discontinuity + #define SPC_MP_INFEXP_DEXCPT (1<<3) //!< Size enable + #define SPC_MP_INFEXP_TEST (1<<2) //!< Writeback Cache Enable + #define SPC_MP_INFEXP_LOGERR (1<<0) //!< Log errors bit + uint8_t mrie; + #define SPC_MP_INFEXP_MRIE_NO_REPORT 0x00 + #define SPC_MP_INFEXP_MRIE_ASYNC_EVENT 0x01 + #define SPC_MP_INFEXP_MRIE_GEN_UNIT 0x02 + #define SPC_MP_INFEXP_MRIE_COND_RECOV_ERROR 0x03 + #define SPC_MP_INFEXP_MRIE_UNCOND_RECOV_ERROR 0x04 + #define SPC_MP_INFEXP_MRIE_NO_SENSE 0x05 + #define SPC_MP_INFEXP_MRIE_ONLY_REPORT 0x06 + be32_t interval_timer; + be32_t report_count; }; - enum scsi_spc_mode_sense_pc { - SCSI_MS_SENSE_PC_CURRENT = 0, - SCSI_MS_SENSE_PC_CHANGEABLE = 1, - SCSI_MS_SENSE_PC_DEFAULT = 2, - SCSI_MS_SENSE_PC_SAVED = 3, + SCSI_MS_SENSE_PC_CURRENT = 0, + SCSI_MS_SENSE_PC_CHANGEABLE = 1, + SCSI_MS_SENSE_PC_DEFAULT = 2, + SCSI_MS_SENSE_PC_SAVED = 3, }; - - -static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb) -{ - return (cdb[1] >> 3) & 1; +static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb) { + return (cdb[1] >> 3) & 1; } -static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb) -{ - return cdb[2] & 0x3F; +static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb) { + return cdb[2] & 0x3F; } -static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb) -{ - return cdb[2] >> 6; +static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb) { + return cdb[2] >> 6; } /** @@ -302,10 +295,10 @@ static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb) * SENSE(6) */ struct scsi_mode_param_header6 { - uint8_t mode_data_length; //!< Number of bytes after this - uint8_t medium_type; //!< Medium Type - uint8_t device_specific_parameter; //!< Defined by command set - uint8_t block_descriptor_length; //!< Length of block descriptors + uint8_t mode_data_length; //!< Number of bytes after this + uint8_t medium_type; //!< Medium Type + uint8_t device_specific_parameter; //!< Defined by command set + uint8_t block_descriptor_length; //!< Length of block descriptors }; /** @@ -313,23 +306,23 @@ struct scsi_mode_param_header6 { * SENSE(10) */ struct scsi_mode_param_header10 { - be16_t mode_data_length; //!< Number of bytes after this - uint8_t medium_type; //!< Medium Type - uint8_t device_specific_parameter; //!< Defined by command set - uint8_t flags4; //!< LONGLBA in bit 0 - uint8_t reserved; - be16_t block_descriptor_length; //!< Length of block descriptors + be16_t mode_data_length; //!< Number of bytes after this + uint8_t medium_type; //!< Medium Type + uint8_t device_specific_parameter; //!< Defined by command set + uint8_t flags4; //!< LONGLBA in bit 0 + uint8_t reserved; + be16_t block_descriptor_length; //!< Length of block descriptors }; /** * \brief SCSI Page_0 Mode Page header (SPF not set) */ struct scsi_mode_page_0_header { - uint8_t page_code; -#define SCSI_PAGE_CODE_PS (1 << 7) //!< Parameters Saveable -#define SCSI_PAGE_CODE_SPF (1 << 6) //!< SubPage Format - uint8_t page_length; //!< Number of bytes after this -#define SCSI_MS_PAGE_LEN(total) ((total) - 2) + uint8_t page_code; +#define SCSI_PAGE_CODE_PS (1 << 7) //!< Parameters Saveable +#define SCSI_PAGE_CODE_SPF (1 << 6) //!< SubPage Format + uint8_t page_length; //!< Number of bytes after this +#define SCSI_MS_PAGE_LEN(total) ((total) - 2) }; //@} diff --git a/Marlin/src/HAL/DUE/usb/sysclk.h b/Marlin/src/HAL/DUE/usb/sysclk.h index 16db8c86d373..062337861502 100644 --- a/Marlin/src/HAL/DUE/usb/sysclk.h +++ b/Marlin/src/HAL/DUE/usb/sysclk.h @@ -71,7 +71,7 @@ * \subsection sysclk_quickstart_use_case_1_setup_steps Initialization code * Add to the application initialization code: * \code - sysclk_init(); + sysclk_init(); \endcode * * \subsection sysclk_quickstart_use_case_1_setup_steps_workflow Workflow @@ -82,15 +82,15 @@ * Add or uncomment the following in your conf_clock.h header file, commenting out all other * definitions of the same symbol(s): * \code - #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK + #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK - // Fpll0 = (Fclk * PLL_mul) / PLL_div - #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL - #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL) - #define CONFIG_PLL0_DIV 1 + // Fpll0 = (Fclk * PLL_mul) / PLL_div + #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL + #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL) + #define CONFIG_PLL0_DIV 1 - // Fbus = Fsys / BUS_div - #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1 + // Fbus = Fsys / BUS_div + #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1 \endcode * * \subsection sysclk_quickstart_use_case_1_example_workflow Workflow @@ -100,14 +100,14 @@ * \code #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL \endcode * -# Configure the PLL module to multiply the external fast crystal oscillator frequency up to 84MHz: * \code - #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL) - #define CONFIG_PLL0_DIV 1 + #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL) + #define CONFIG_PLL0_DIV 1 \endcode * \note For user boards, \c BOARD_FREQ_MAINCK_XTAL should be defined in the board \c conf_board.h configuration * file as the frequency of the fast crystal attached to the microcontroller. * -# Configure the main clock to run at the full 84MHz, disable scaling of the main system clock speed: * \code - #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1 + #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1 \endcode * \note Some dividers are powers of two, while others are integer division factors. Refer to the * formulas in the conf_clock.h template commented above each division define. @@ -136,7 +136,7 @@ extern "C" { * initialization. */ #ifndef CONFIG_SYSCLK_SOURCE -# define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC + #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC #endif /** * \def CONFIG_SYSCLK_PRES @@ -149,7 +149,7 @@ extern "C" { * after initialization. */ #ifndef CONFIG_SYSCLK_PRES -# define CONFIG_SYSCLK_PRES 0 + #define CONFIG_SYSCLK_PRES 0 #endif //@} @@ -197,7 +197,7 @@ extern "C" { * USB is not required. */ #ifdef __DOXYGEN__ -# define CONFIG_USBCLK_SOURCE + #define CONFIG_USBCLK_SOURCE #endif /** @@ -209,7 +209,7 @@ extern "C" { * defined. */ #ifdef __DOXYGEN__ -# define CONFIG_USBCLK_DIV + #define CONFIG_USBCLK_DIV #endif diff --git a/Marlin/src/HAL/DUE/usb/udc.h b/Marlin/src/HAL/DUE/usb/udc.h index 8d92eb5c038a..6230a81b359c 100644 --- a/Marlin/src/HAL/DUE/usb/udc.h +++ b/Marlin/src/HAL/DUE/usb/udc.h @@ -144,15 +144,15 @@ extern "C" { * \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode * User C file contains: * \code - // Authorize VBUS monitoring - if (!udc_include_vbus_monitoring()) { - // Implement custom VBUS monitoring via GPIO or other - } - Event_VBUS_present() // VBUS interrupt or GPIO interrupt or other - { - // Attach USB Device - udc_attach(); - } + // Authorize VBUS monitoring + if (!udc_include_vbus_monitoring()) { + // Implement custom VBUS monitoring via GPIO or other + } + Event_VBUS_present() // VBUS interrupt or GPIO interrupt or other + { + // Attach USB Device + udc_attach(); + } \endcode * * - Case of battery charging. conf_usb.h file contains define @@ -160,21 +160,20 @@ extern "C" { * \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode * User C file contains: * \code - Event VBUS present() // VBUS interrupt or GPIO interrupt or .. - { - // Authorize battery charging, but wait key press to start USB. - } - Event Key press() - { - // Stop batteries charging - // Start USB - udc_attach(); - } + Event VBUS present() // VBUS interrupt or GPIO interrupt or .. + { + // Authorize battery charging, but wait key press to start USB. + } + Event Key press() + { + // Stop batteries charging + // Start USB + udc_attach(); + } \endcode */ -static inline bool udc_include_vbus_monitoring(void) -{ - return udd_include_vbus_monitoring(); +static inline bool udc_include_vbus_monitoring(void) { + return udd_include_vbus_monitoring(); } /*! \brief Start the USB Device stack @@ -192,32 +191,26 @@ void udc_stop(void); * then it will attach device when an acceptable Vbus * level from the host is detected. */ -static inline void udc_attach(void) -{ - udd_attach(); +static inline void udc_attach(void) { + udd_attach(); } - /** * \brief Detaches the device from the bus * * The driver must remove pull-up on USB line D- or D+. */ -static inline void udc_detach(void) -{ - udd_detach(); +static inline void udc_detach(void) { + udd_detach(); } - /*! \brief The USB driver sends a resume signal called \e "Upstream Resume" * This is authorized only when the remote wakeup feature is enabled by host. */ -static inline void udc_remotewakeup(void) -{ - udd_send_remotewakeup(); +static inline void udc_remotewakeup(void) { + udd_send_remotewakeup(); } - /** * \brief Returns a pointer on the current interface descriptor * @@ -296,23 +289,23 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * * for AVR and SAM3/4 devices, add to the initialization code: * \code - sysclk_init(); - irq_initialize_vectors(); - cpu_irq_enable(); - board_init(); - sleepmgr_init(); // Optional + sysclk_init(); + irq_initialize_vectors(); + cpu_irq_enable(); + board_init(); + sleepmgr_init(); // Optional \endcode * * For SAMD devices, add to the initialization code: * \code - system_init(); - irq_initialize_vectors(); - cpu_irq_enable(); - sleepmgr_init(); // Optional + system_init(); + irq_initialize_vectors(); + cpu_irq_enable(); + sleepmgr_init(); // Optional \endcode * Add to the main IDLE loop: * \code - sleepmgr_enter_sleep(); // Optional + sleepmgr_enter_sleep(); // Optional \endcode * */ @@ -324,20 +317,20 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * * Content of conf_usb.h: * \code - #define USB_DEVICE_VENDOR_ID 0x03EB - #define USB_DEVICE_PRODUCT_ID 0xXXXX - #define USB_DEVICE_MAJOR_VERSION 1 - #define USB_DEVICE_MINOR_VERSION 0 - #define USB_DEVICE_POWER 100 - #define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED + #define USB_DEVICE_VENDOR_ID 0x03EB + #define USB_DEVICE_PRODUCT_ID 0xXXXX + #define USB_DEVICE_MAJOR_VERSION 1 + #define USB_DEVICE_MINOR_VERSION 0 + #define USB_DEVICE_POWER 100 + #define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED \endcode * * Add to application C-file: * \code - void usb_init(void) - { - udc_start(); - } + void usb_init(void) + { + udc_start(); + } \endcode */ @@ -349,17 +342,17 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * -# Ensure that conf_usb.h is available and contains the following configuration * which is the main USB device configuration: * - \code // Vendor ID provided by USB org (ATMEL 0x03EB) - #define USB_DEVICE_VENDOR_ID 0x03EB // Type Word - // Product ID (Atmel PID referenced in usb_atmel.h) - #define USB_DEVICE_PRODUCT_ID 0xXXXX // Type Word - // Major version of the device - #define USB_DEVICE_MAJOR_VERSION 1 // Type Byte - // Minor version of the device - #define USB_DEVICE_MINOR_VERSION 0 // Type Byte - // Maximum device power (mA) - #define USB_DEVICE_POWER 100 // Type 9-bits - // USB attributes to enable features - #define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED // Flags \endcode + #define USB_DEVICE_VENDOR_ID 0x03EB // Type Word + // Product ID (Atmel PID referenced in usb_atmel.h) + #define USB_DEVICE_PRODUCT_ID 0xXXXX // Type Word + // Major version of the device + #define USB_DEVICE_MAJOR_VERSION 1 // Type Byte + // Minor version of the device + #define USB_DEVICE_MINOR_VERSION 0 // Type Byte + // Maximum device power (mA) + #define USB_DEVICE_POWER 100 // Type 9-bits + // USB attributes to enable features + #define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED // Flags \endcode * -# Call the USB device stack start function to enable stack and start USB: * - \code udc_start(); \endcode * \note In case of USB dual roles (Device and Host) managed through USB OTG connector @@ -372,90 +365,90 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * * Content of XMEGA conf_clock.h: * \code - // Configuration based on internal RC: - // USB clock need of 48Mhz - #define CONFIG_USBCLK_SOURCE USBCLK_SRC_RCOSC - #define CONFIG_OSC_RC32_CAL 48000000UL - #define CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC OSC_ID_USBSOF - // CPU clock need of clock > 12MHz to run with USB (Here 24MHz) - #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_RC32MHZ - #define CONFIG_SYSCLK_PSADIV SYSCLK_PSADIV_2 - #define CONFIG_SYSCLK_PSBCDIV SYSCLK_PSBCDIV_1_1 + // Configuration based on internal RC: + // USB clock need of 48Mhz + #define CONFIG_USBCLK_SOURCE USBCLK_SRC_RCOSC + #define CONFIG_OSC_RC32_CAL 48000000UL + #define CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC OSC_ID_USBSOF + // CPU clock need of clock > 12MHz to run with USB (Here 24MHz) + #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_RC32MHZ + #define CONFIG_SYSCLK_PSADIV SYSCLK_PSADIV_2 + #define CONFIG_SYSCLK_PSBCDIV SYSCLK_PSBCDIV_1_1 \endcode * * Content of conf_clock.h for AT32UC3A0, AT32UC3A1, AT32UC3B devices (USBB): * \code - // Configuration based on 12MHz external OSC: - #define CONFIG_PLL1_SOURCE PLL_SRC_OSC0 - #define CONFIG_PLL1_MUL 8 - #define CONFIG_PLL1_DIV 2 - #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1 - #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div) + // Configuration based on 12MHz external OSC: + #define CONFIG_PLL1_SOURCE PLL_SRC_OSC0 + #define CONFIG_PLL1_MUL 8 + #define CONFIG_PLL1_DIV 2 + #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1 + #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div) \endcode * * Content of conf_clock.h for AT32UC3A3, AT32UC3A4 devices (USBB with high speed support): * \code - // Configuration based on 12MHz external OSC: - #define CONFIG_USBCLK_SOURCE USBCLK_SRC_OSC0 - #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div) + // Configuration based on 12MHz external OSC: + #define CONFIG_USBCLK_SOURCE USBCLK_SRC_OSC0 + #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div) \endcode * * Content of conf_clock.h for AT32UC3C, ATUCXXD, ATUCXXL3U, ATUCXXL4U devices (USBC): * \code - // Configuration based on 12MHz external OSC: - #define CONFIG_PLL1_SOURCE PLL_SRC_OSC0 - #define CONFIG_PLL1_MUL 8 - #define CONFIG_PLL1_DIV 2 - #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1 - #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div) - // CPU clock need of clock > 25MHz to run with USBC - #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLL1 + // Configuration based on 12MHz external OSC: + #define CONFIG_PLL1_SOURCE PLL_SRC_OSC0 + #define CONFIG_PLL1_MUL 8 + #define CONFIG_PLL1_DIV 2 + #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1 + #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div) + // CPU clock need of clock > 25MHz to run with USBC + #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLL1 \endcode * * Content of conf_clock.h for SAM3S, SAM3SD, SAM4S devices (UPD: USB Peripheral Device): * \code - // PLL1 (B) Options (Fpll = (Fclk * PLL_mul) / PLL_div) - #define CONFIG_PLL1_SOURCE PLL_SRC_MAINCK_XTAL - #define CONFIG_PLL1_MUL 16 - #define CONFIG_PLL1_DIV 2 - // USB Clock Source Options (Fusb = FpllX / USB_div) - #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1 - #define CONFIG_USBCLK_DIV 2 + // PLL1 (B) Options (Fpll = (Fclk * PLL_mul) / PLL_div) + #define CONFIG_PLL1_SOURCE PLL_SRC_MAINCK_XTAL + #define CONFIG_PLL1_MUL 16 + #define CONFIG_PLL1_DIV 2 + // USB Clock Source Options (Fusb = FpllX / USB_div) + #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1 + #define CONFIG_USBCLK_DIV 2 \endcode * * Content of conf_clock.h for SAM3U device (UPDHS: USB Peripheral Device High Speed): * \code - // USB Clock Source fixed at UPLL. + // USB Clock Source fixed at UPLL. \endcode * * Content of conf_clock.h for SAM3X, SAM3A devices (UOTGHS: USB OTG High Speed): * \code - // USB Clock Source fixed at UPLL. - #define CONFIG_USBCLK_SOURCE USBCLK_SRC_UPLL - #define CONFIG_USBCLK_DIV 1 + // USB Clock Source fixed at UPLL. + #define CONFIG_USBCLK_SOURCE USBCLK_SRC_UPLL + #define CONFIG_USBCLK_DIV 1 \endcode * * Content of conf_clocks.h for SAMD devices (USB): * \code - // System clock bus configuration - # define CONF_CLOCK_FLASH_WAIT_STATES 2 - - // USB Clock Source fixed at DFLL. - // SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop - # define CONF_CLOCK_DFLL_ENABLE true - # define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY - # define CONF_CLOCK_DFLL_ON_DEMAND true - - // Set this to true to configure the GCLK when running clocks_init. - // If set to false, none of the GCLK generators will be configured in clocks_init(). - # define CONF_CLOCK_CONFIGURE_GCLK true - - // Configure GCLK generator 0 (Main Clock) - # define CONF_CLOCK_GCLK_0_ENABLE true - # define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY true - # define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_DFLL - # define CONF_CLOCK_GCLK_0_PRESCALER 1 - # define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false + // System clock bus configuration + # define CONF_CLOCK_FLASH_WAIT_STATES 2 + + // USB Clock Source fixed at DFLL. + // SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop + # define CONF_CLOCK_DFLL_ENABLE true + # define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY + # define CONF_CLOCK_DFLL_ON_DEMAND true + + // Set this to true to configure the GCLK when running clocks_init. + // If set to false, none of the GCLK generators will be configured in clocks_init(). + # define CONF_CLOCK_CONFIGURE_GCLK true + + // Configure GCLK generator 0 (Main Clock) + # define CONF_CLOCK_GCLK_0_ENABLE true + # define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY true + # define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_DFLL + # define CONF_CLOCK_GCLK_0_PRESCALER 1 + # define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false \endcode */ @@ -474,34 +467,34 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * \subsection udc_use_case_1_usage_code Example code * Content of conf_usb.h: * \code - #if // Low speed - #define USB_DEVICE_LOW_SPEED - // #define USB_DEVICE_HS_SUPPORT + #if // Low speed + #define USB_DEVICE_LOW_SPEED + // #define USB_DEVICE_HS_SUPPORT - #elif // Full speed - // #define USB_DEVICE_LOW_SPEED - // #define USB_DEVICE_HS_SUPPORT + #elif // Full speed + // #define USB_DEVICE_LOW_SPEED + // #define USB_DEVICE_HS_SUPPORT - #elif // High speed - // #define USB_DEVICE_LOW_SPEED - #define USB_DEVICE_HS_SUPPORT + #elif // High speed + // #define USB_DEVICE_LOW_SPEED + #define USB_DEVICE_HS_SUPPORT - #endif + #endif \endcode * * \subsection udc_use_case_1_usage_flow Workflow * -# Ensure that conf_usb.h is available and contains the following parameters * required for a USB device low speed (1.5Mbit/s): * - \code #define USB_DEVICE_LOW_SPEED - //#define USB_DEVICE_HS_SUPPORT \endcode + //#define USB_DEVICE_HS_SUPPORT \endcode * -# Ensure that conf_usb.h contains the following parameters * required for a USB device full speed (12Mbit/s): * - \code //#define USB_DEVICE_LOW_SPEED - //#define USB_DEVICE_HS_SUPPORT \endcode + //#define USB_DEVICE_HS_SUPPORT \endcode * -# Ensure that conf_usb.h contains the following parameters * required for a USB device high speed (480Mbit/s): * - \code //#define USB_DEVICE_LOW_SPEED - #define USB_DEVICE_HS_SUPPORT \endcode + #define USB_DEVICE_HS_SUPPORT \endcode */ /** @@ -518,20 +511,20 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * \subsection udc_use_case_2_usage_code Example code * Content of conf_usb.h: * \code - #define USB_DEVICE_MANUFACTURE_NAME "Manufacture name" - #define USB_DEVICE_PRODUCT_NAME "Product name" - #define USB_DEVICE_SERIAL_NAME "12...EF" + #define USB_DEVICE_MANUFACTURE_NAME "Manufacture name" + #define USB_DEVICE_PRODUCT_NAME "Product name" + #define USB_DEVICE_SERIAL_NAME "12...EF" \endcode * * \subsection udc_use_case_2_usage_flow Workflow * -# Ensure that conf_usb.h is available and contains the following parameters * required to enable different USB strings: * - \code // Static ASCII name for the manufacture - #define USB_DEVICE_MANUFACTURE_NAME "Manufacture name" \endcode + #define USB_DEVICE_MANUFACTURE_NAME "Manufacture name" \endcode * - \code // Static ASCII name for the product - #define USB_DEVICE_PRODUCT_NAME "Product name" \endcode + #define USB_DEVICE_PRODUCT_NAME "Product name" \endcode * - \code // Static ASCII name to enable and set a serial number - #define USB_DEVICE_SERIAL_NAME "12...EF" \endcode + #define USB_DEVICE_SERIAL_NAME "12...EF" \endcode */ /** @@ -548,42 +541,42 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * \subsection udc_use_case_3_usage_code Example code * Content of conf_usb.h: * \code - #define USB_DEVICE_ATTR \ - (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) - #define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable() - extern void my_callback_remotewakeup_enable(void); - #define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable() - extern void my_callback_remotewakeup_disable(void); + #define USB_DEVICE_ATTR \ + (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) + #define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable() + extern void my_callback_remotewakeup_enable(void); + #define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable() + extern void my_callback_remotewakeup_disable(void); \endcode * * Add to application C-file: * \code - void my_callback_remotewakeup_enable(void) - { - // Enable application wakeup events (e.g. enable GPIO interrupt) - } - void my_callback_remotewakeup_disable(void) - { - // Disable application wakeup events (e.g. disable GPIO interrupt) - } - - void my_interrupt_event(void) - { - udc_remotewakeup(); - } + void my_callback_remotewakeup_enable(void) + { + // Enable application wakeup events (e.g. enable GPIO interrupt) + } + void my_callback_remotewakeup_disable(void) + { + // Disable application wakeup events (e.g. disable GPIO interrupt) + } + + void my_interrupt_event(void) + { + udc_remotewakeup(); + } \endcode * * \subsection udc_use_case_3_usage_flow Workflow * -# Ensure that conf_usb.h is available and contains the following parameters * required to enable remote wakeup feature: * - \code // Authorizes the remote wakeup feature - #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) \endcode + #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) \endcode * - \code // Define callback called when the host enables the remotewakeup feature - #define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable() - extern void my_callback_remotewakeup_enable(void); \endcode + #define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable() + extern void my_callback_remotewakeup_enable(void); \endcode * - \code // Define callback called when the host disables the remotewakeup feature - #define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable() - extern void my_callback_remotewakeup_disable(void); \endcode + #define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable() + extern void my_callback_remotewakeup_disable(void); \endcode * -# Send a remote wakeup (USB upstream): * - \code udc_remotewakeup(); \endcode */ @@ -603,40 +596,40 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * \subsection udc_use_case_5_usage_code Example code * Content of conf_usb.h: * \code - #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) - #define UDC_SUSPEND_EVENT() user_callback_suspend_action() - extern void user_callback_suspend_action(void) - #define UDC_RESUME_EVENT() user_callback_resume_action() - extern void user_callback_resume_action(void) + #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) + #define UDC_SUSPEND_EVENT() user_callback_suspend_action() + extern void user_callback_suspend_action(void) + #define UDC_RESUME_EVENT() user_callback_resume_action() + extern void user_callback_resume_action(void) \endcode * * Add to application C-file: * \code - void user_callback_suspend_action(void) - { - // Disable hardware component to reduce power consumption - } - void user_callback_resume_action(void) - { - // Re-enable hardware component - } + void user_callback_suspend_action(void) + { + // Disable hardware component to reduce power consumption + } + void user_callback_resume_action(void) + { + // Re-enable hardware component + } \endcode * * \subsection udc_use_case_5_usage_flow Workflow * -# Ensure that conf_usb.h is available and contains the following parameters: * - \code // Authorizes the BUS power feature - #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) \endcode + #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) \endcode * - \code // Define callback called when the host suspend the USB line - #define UDC_SUSPEND_EVENT() user_callback_suspend_action() - extern void user_callback_suspend_action(void); \endcode + #define UDC_SUSPEND_EVENT() user_callback_suspend_action() + extern void user_callback_suspend_action(void); \endcode * - \code // Define callback called when the host or device resume the USB line - #define UDC_RESUME_EVENT() user_callback_resume_action() - extern void user_callback_resume_action(void); \endcode + #define UDC_RESUME_EVENT() user_callback_resume_action() + extern void user_callback_resume_action(void); \endcode * -# Reduce power consumption in suspend mode (max. 2.5mA on Vbus): * - \code void user_callback_suspend_action(void) - { - turn_off_components(); - } \endcode + { + turn_off_components(); + } \endcode */ /** @@ -654,42 +647,42 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void); * \subsection udc_use_case_6_usage_code Example code * Content of conf_usb.h: * \code - #define USB_DEVICE_SERIAL_NAME - #define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number - #define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12 - extern uint8_t serial_number[]; + #define USB_DEVICE_SERIAL_NAME + #define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number + #define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12 + extern uint8_t serial_number[]; \endcode * * Add to application C-file: * \code - uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH]; + uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH]; - void init_build_usb_serial_number(void) - { - serial_number[0] = 'A'; - serial_number[1] = 'B'; - ... - serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C'; - } \endcode + void init_build_usb_serial_number(void) + { + serial_number[0] = 'A'; + serial_number[1] = 'B'; + ... + serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C'; + } \endcode * * \subsection udc_use_case_6_usage_flow Workflow * -# Ensure that conf_usb.h is available and contains the following parameters * required to enable a USB serial number strings dynamically: * - \code #define USB_DEVICE_SERIAL_NAME // Define this empty - #define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number // Give serial array pointer - #define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12 // Give size of serial array - extern uint8_t serial_number[]; // Declare external serial array \endcode + #define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number // Give serial array pointer + #define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12 // Give size of serial array + extern uint8_t serial_number[]; // Declare external serial array \endcode * -# Before start USB stack, initialize the serial array * - \code - uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH]; - - void init_build_usb_serial_number(void) - { - serial_number[0] = 'A'; - serial_number[1] = 'B'; - ... - serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C'; - } \endcode + uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH]; + + void init_build_usb_serial_number(void) + { + serial_number[0] = 'A'; + serial_number[1] = 'B'; + ... + serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C'; + } \endcode */ diff --git a/Marlin/src/HAL/DUE/usb/udc_desc.h b/Marlin/src/HAL/DUE/usb/udc_desc.h index 052ca08eca78..f1f328d035c3 100644 --- a/Marlin/src/HAL/DUE/usb/udc_desc.h +++ b/Marlin/src/HAL/DUE/usb/udc_desc.h @@ -78,50 +78,47 @@ extern "C" { * For Mega application used "code". */ #define UDC_DESC_STORAGE - // Descriptor storage in internal RAM + // Descriptor storage in internal RAM #if (defined UDC_DATA_USE_HRAM_SUPPORT) -# if defined(__GNUC__) -# define UDC_DATA(x) COMPILER_WORD_ALIGNED __attribute__((__section__(".data_hram0"))) -# define UDC_BSS(x) COMPILER_ALIGNED(x) __attribute__((__section__(".bss_hram0"))) -# elif defined(__ICCAVR32__) -# define UDC_DATA(x) COMPILER_ALIGNED(x) __data32 -# define UDC_BSS(x) COMPILER_ALIGNED(x) __data32 -# endif + #if defined(__GNUC__) + #define UDC_DATA(x) COMPILER_WORD_ALIGNED __attribute__((__section__(".data_hram0"))) + #define UDC_BSS(x) COMPILER_ALIGNED(x) __attribute__((__section__(".bss_hram0"))) +#elif defined(__ICCAVR32__) + #define UDC_DATA(x) COMPILER_ALIGNED(x) __data32 + #define UDC_BSS(x) COMPILER_ALIGNED(x) __data32 +#endif #else -# define UDC_DATA(x) COMPILER_ALIGNED(x) -# define UDC_BSS(x) COMPILER_ALIGNED(x) + #define UDC_DATA(x) COMPILER_ALIGNED(x) + #define UDC_BSS(x) COMPILER_ALIGNED(x) #endif - - /** * \brief Configuration descriptor and UDI link for one USB speed */ typedef struct { - //! USB configuration descriptor - usb_conf_desc_t UDC_DESC_STORAGE *desc; - //! Array of UDI API pointer - udi_api_t UDC_DESC_STORAGE *UDC_DESC_STORAGE * udi_apis; + //! USB configuration descriptor + usb_conf_desc_t UDC_DESC_STORAGE *desc; + //! Array of UDI API pointer + udi_api_t UDC_DESC_STORAGE *UDC_DESC_STORAGE * udi_apis; } udc_config_speed_t; - /** * \brief All information about the USB Device */ typedef struct { - //! USB device descriptor for low or full speed - usb_dev_desc_t UDC_DESC_STORAGE *confdev_lsfs; - //! USB configuration descriptor and UDI API pointers for low or full speed - udc_config_speed_t UDC_DESC_STORAGE *conf_lsfs; -#ifdef USB_DEVICE_HS_SUPPORT - //! USB device descriptor for high speed - usb_dev_desc_t UDC_DESC_STORAGE *confdev_hs; - //! USB device qualifier, only use in high speed mode - usb_dev_qual_desc_t UDC_DESC_STORAGE *qualifier; - //! USB configuration descriptor and UDI API pointers for high speed - udc_config_speed_t UDC_DESC_STORAGE *conf_hs; -#endif - usb_dev_bos_desc_t UDC_DESC_STORAGE *conf_bos; + //! USB device descriptor for low or full speed + usb_dev_desc_t UDC_DESC_STORAGE *confdev_lsfs; + //! USB configuration descriptor and UDI API pointers for low or full speed + udc_config_speed_t UDC_DESC_STORAGE *conf_lsfs; + #ifdef USB_DEVICE_HS_SUPPORT + //! USB device descriptor for high speed + usb_dev_desc_t UDC_DESC_STORAGE *confdev_hs; + //! USB device qualifier, only use in high speed mode + usb_dev_qual_desc_t UDC_DESC_STORAGE *qualifier; + //! USB configuration descriptor and UDI API pointers for high speed + udc_config_speed_t UDC_DESC_STORAGE *conf_hs; + #endif + usb_dev_bos_desc_t UDC_DESC_STORAGE *conf_bos; } udc_config_t; //! Global variables of USB Device Descriptor and UDI links diff --git a/Marlin/src/HAL/DUE/usb/udd.h b/Marlin/src/HAL/DUE/usb/udd.h index 319d8842f744..6eda465e54a4 100644 --- a/Marlin/src/HAL/DUE/usb/udd.h +++ b/Marlin/src/HAL/DUE/usb/udd.h @@ -71,8 +71,8 @@ typedef uint8_t udd_ep_id_t; //! \brief Endpoint transfer status //! Returned in parameters of callback register via udd_ep_run routine. typedef enum { - UDD_EP_TRANSFER_OK = 0, - UDD_EP_TRANSFER_ABORT = 1, + UDD_EP_TRANSFER_OK = 0, + UDD_EP_TRANSFER_ABORT = 1, } udd_ep_status_t; /** @@ -82,41 +82,37 @@ typedef enum { * It can be updated by udc_process_setup() from UDC or *setup() from UDIs. */ typedef struct { - //! Data received in USB SETUP packet - //! Note: The swap of "req.wValues" from uin16_t to le16_t is done by UDD. - usb_setup_req_t req; + //! Data received in USB SETUP packet + //! Note: The swap of "req.wValues" from uin16_t to le16_t is done by UDD. + usb_setup_req_t req; - //! Point to buffer to send or fill with data following SETUP packet - //! This buffer must be word align for DATA IN phase (use prefix COMPILER_WORD_ALIGNED for buffer) - uint8_t *payload; + //! Point to buffer to send or fill with data following SETUP packet + //! This buffer must be word align for DATA IN phase (use prefix COMPILER_WORD_ALIGNED for buffer) + uint8_t *payload; - //! Size of buffer to send or fill, and content the number of byte transferred - uint16_t payload_size; + //! Size of buffer to send or fill, and content the number of byte transferred + uint16_t payload_size; - //! Callback called after reception of ZLP from setup request - void (*callback)(void); + //! Callback called after reception of ZLP from setup request + void (*callback)(void); - //! Callback called when the buffer given (.payload) is full or empty. - //! This one return false to abort data transfer, or true with a new buffer in .payload. - bool (*over_under_run)(void); + //! Callback called when the buffer given (.payload) is full or empty. + //! This one return false to abort data transfer, or true with a new buffer in .payload. + bool (*over_under_run)(void); } udd_ctrl_request_t; extern udd_ctrl_request_t udd_g_ctrlreq; //! Return true if the setup request \a udd_g_ctrlreq indicates IN data transfer -#define Udd_setup_is_in() \ - (USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK)) +#define Udd_setup_is_in() (USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK)) //! Return true if the setup request \a udd_g_ctrlreq indicates OUT data transfer -#define Udd_setup_is_out() \ - (USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK)) +#define Udd_setup_is_out() (USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK)) //! Return the type of the SETUP request \a udd_g_ctrlreq. \see usb_reqtype. -#define Udd_setup_type() \ - (udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK) +#define Udd_setup_type() (udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK) //! Return the recipient of the SETUP request \a udd_g_ctrlreq. \see usb_recipient -#define Udd_setup_recipient() \ - (udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK) +#define Udd_setup_recipient() (udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK) /** * \brief End of halt callback function type. @@ -134,8 +130,7 @@ typedef void (*udd_callback_halt_cleared_t)(void); * \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted * \param n number of data transferred */ -typedef void (*udd_callback_trans_t) (udd_ep_status_t status, - iram_size_t nb_transferred, udd_ep_id_t ep); +typedef void (*udd_callback_trans_t) (udd_ep_status_t status, iram_size_t nb_transferred, udd_ep_id_t ep); /** * \brief Authorizes the VBUS event @@ -239,8 +234,7 @@ void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size ); * * \return \c 1 if the endpoint is enabled, otherwise \c 0. */ -bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes, - uint16_t MaxEndpointSize); +bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes, uint16_t MaxEndpointSize); /** * \brief Disables an endpoint @@ -294,8 +288,7 @@ bool udd_ep_clear_halt(udd_ep_id_t ep); * * \return \c 1 if the register is accepted, otherwise \c 0. */ -bool udd_ep_wait_stall_clear(udd_ep_id_t ep, - udd_callback_halt_cleared_t callback); +bool udd_ep_wait_stall_clear(udd_ep_id_t ep, udd_callback_halt_cleared_t callback); /** * \brief Allows to receive or send data on an endpoint @@ -321,9 +314,8 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep, * * \return \c 1 if function was successfully done, otherwise \c 0. */ -bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket, - uint8_t * buf, iram_size_t buf_size, - udd_callback_trans_t callback); +bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket, uint8_t * buf, iram_size_t buf_size, udd_callback_trans_t callback); + /** * \brief Aborts transfer on going on endpoint * @@ -339,7 +331,6 @@ void udd_ep_abort(udd_ep_id_t ep); //@} - /** * \name High speed test mode management * @@ -352,7 +343,6 @@ void udd_test_mode_se0_nak(void); void udd_test_mode_packet(void); //@} - /** * \name UDC callbacks to provide for UDD * diff --git a/Marlin/src/HAL/DUE/usb/udi.h b/Marlin/src/HAL/DUE/usb/udi.h index febf03b7181e..bc5de086f3ce 100644 --- a/Marlin/src/HAL/DUE/usb/udi.h +++ b/Marlin/src/HAL/DUE/usb/udi.h @@ -72,57 +72,57 @@ extern "C" { * selected by UDC. */ typedef struct { - /** - * \brief Enable the interface. - * - * This function is called when the host selects a configuration - * to which this interface belongs through a Set Configuration - * request, and when the host selects an alternate setting of - * this interface through a Set Interface request. - * - * \return \c 1 if function was successfully done, otherwise \c 0. - */ - bool (*enable)(void); + /** + * \brief Enable the interface. + * + * This function is called when the host selects a configuration + * to which this interface belongs through a Set Configuration + * request, and when the host selects an alternate setting of + * this interface through a Set Interface request. + * + * \return \c 1 if function was successfully done, otherwise \c 0. + */ + bool (*enable)(void); - /** - * \brief Disable the interface. - * - * This function is called when this interface is currently - * active, and - * - the host selects any configuration through a Set - * Configuration request, or - * - the host issues a USB reset, or - * - the device is detached from the host (i.e. Vbus is no - * longer present) - */ - void (*disable)(void); + /** + * \brief Disable the interface. + * + * This function is called when this interface is currently + * active, and + * - the host selects any configuration through a Set + * Configuration request, or + * - the host issues a USB reset, or + * - the device is detached from the host (i.e. Vbus is no + * longer present) + */ + void (*disable)(void); - /** - * \brief Handle a control request directed at an interface. - * - * This function is called when this interface is currently - * active and the host sends a SETUP request - * with this interface as the recipient. - * - * Use udd_g_ctrlreq to decode and response to SETUP request. - * - * \return \c 1 if this interface supports the SETUP request, otherwise \c 0. - */ - bool (*setup)(void); + /** + * \brief Handle a control request directed at an interface. + * + * This function is called when this interface is currently + * active and the host sends a SETUP request + * with this interface as the recipient. + * + * Use udd_g_ctrlreq to decode and response to SETUP request. + * + * \return \c 1 if this interface supports the SETUP request, otherwise \c 0. + */ + bool (*setup)(void); - /** - * \brief Returns the current setting of the selected interface. - * - * This function is called when UDC when know alternate setting of selected interface. - * - * \return alternate setting of selected interface - */ - uint8_t (*getsetting)(void); + /** + * \brief Returns the current setting of the selected interface. + * + * This function is called when UDC when know alternate setting of selected interface. + * + * \return alternate setting of selected interface + */ + uint8_t (*getsetting)(void); - /** - * \brief To signal that a SOF is occurred - */ - void (*sof_notify)(void); + /** + * \brief To signal that a SOF is occurred + */ + void (*sof_notify)(void); } udi_api_t; //@} diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.h b/Marlin/src/HAL/DUE/usb/udi_cdc.h index b61845011aa2..2bc5fff18716 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc.h +++ b/Marlin/src/HAL/DUE/usb/udi_cdc.h @@ -92,18 +92,18 @@ extern UDC_DESC_STORAGE udi_api_t udi_api_cdc_data; * descriptors for the CDC Communication Class interface. */ typedef struct { - //! Standard interface descriptor - usb_iface_desc_t iface; - //! CDC Header functional descriptor - usb_cdc_hdr_desc_t header; - //! CDC Abstract Control Model functional descriptor - usb_cdc_acm_desc_t acm; - //! CDC Union functional descriptor - usb_cdc_union_desc_t union_desc; - //! CDC Call Management functional descriptor - usb_cdc_call_mgmt_desc_t call_mgmt; - //! Notification endpoint descriptor - usb_ep_desc_t ep_notify; + //! Standard interface descriptor + usb_iface_desc_t iface; + //! CDC Header functional descriptor + usb_cdc_hdr_desc_t header; + //! CDC Abstract Control Model functional descriptor + usb_cdc_acm_desc_t acm; + //! CDC Union functional descriptor + usb_cdc_union_desc_t union_desc; + //! CDC Call Management functional descriptor + usb_cdc_call_mgmt_desc_t call_mgmt; + //! Notification endpoint descriptor + usb_ep_desc_t ep_notify; } udi_cdc_comm_desc_t; @@ -114,11 +114,11 @@ typedef struct { * CDC Data Class interface. */ typedef struct { - //! Standard interface descriptor - usb_iface_desc_t iface; - //! Data IN/OUT endpoint descriptors - usb_ep_desc_t ep_in; - usb_ep_desc_t ep_out; + //! Standard interface descriptor + usb_iface_desc_t iface; + //! Data IN/OUT endpoint descriptors + usb_ep_desc_t ep_in; + usb_ep_desc_t ep_out; } udi_cdc_data_desc_t; @@ -136,13 +136,13 @@ typedef struct { //@{ //! By default no string associated to these interfaces #ifndef UDI_CDC_IAD_STRING_ID_0 -#define UDI_CDC_IAD_STRING_ID_0 0 + #define UDI_CDC_IAD_STRING_ID_0 0 #endif #ifndef UDI_CDC_COMM_STRING_ID_0 -#define UDI_CDC_COMM_STRING_ID_0 0 + #define UDI_CDC_COMM_STRING_ID_0 0 #endif #ifndef UDI_CDC_DATA_STRING_ID_0 -#define UDI_CDC_DATA_STRING_ID_0 0 + #define UDI_CDC_DATA_STRING_ID_0 0 #endif #define UDI_CDC_IAD_DESC_0 UDI_CDC_IAD_DESC(0) #define UDI_CDC_COMM_DESC_0 UDI_CDC_COMM_DESC(0) @@ -151,13 +151,13 @@ typedef struct { //! By default no string associated to these interfaces #ifndef UDI_CDC_IAD_STRING_ID_1 -#define UDI_CDC_IAD_STRING_ID_1 0 + #define UDI_CDC_IAD_STRING_ID_1 0 #endif #ifndef UDI_CDC_COMM_STRING_ID_1 -#define UDI_CDC_COMM_STRING_ID_1 0 + #define UDI_CDC_COMM_STRING_ID_1 0 #endif #ifndef UDI_CDC_DATA_STRING_ID_1 -#define UDI_CDC_DATA_STRING_ID_1 0 + #define UDI_CDC_DATA_STRING_ID_1 0 #endif #define UDI_CDC_IAD_DESC_1 UDI_CDC_IAD_DESC(1) #define UDI_CDC_COMM_DESC_1 UDI_CDC_COMM_DESC(1) @@ -166,13 +166,13 @@ typedef struct { //! By default no string associated to these interfaces #ifndef UDI_CDC_IAD_STRING_ID_2 -#define UDI_CDC_IAD_STRING_ID_2 0 + #define UDI_CDC_IAD_STRING_ID_2 0 #endif #ifndef UDI_CDC_COMM_STRING_ID_2 -#define UDI_CDC_COMM_STRING_ID_2 0 + #define UDI_CDC_COMM_STRING_ID_2 0 #endif #ifndef UDI_CDC_DATA_STRING_ID_2 -#define UDI_CDC_DATA_STRING_ID_2 0 + #define UDI_CDC_DATA_STRING_ID_2 0 #endif #define UDI_CDC_IAD_DESC_2 UDI_CDC_IAD_DESC(2) #define UDI_CDC_COMM_DESC_2 UDI_CDC_COMM_DESC(2) @@ -181,13 +181,13 @@ typedef struct { //! By default no string associated to these interfaces #ifndef UDI_CDC_IAD_STRING_ID_3 -#define UDI_CDC_IAD_STRING_ID_3 0 + #define UDI_CDC_IAD_STRING_ID_3 0 #endif #ifndef UDI_CDC_COMM_STRING_ID_3 -#define UDI_CDC_COMM_STRING_ID_3 0 + #define UDI_CDC_COMM_STRING_ID_3 0 #endif #ifndef UDI_CDC_DATA_STRING_ID_3 -#define UDI_CDC_DATA_STRING_ID_3 0 + #define UDI_CDC_DATA_STRING_ID_3 0 #endif #define UDI_CDC_IAD_DESC_3 UDI_CDC_IAD_DESC(3) #define UDI_CDC_COMM_DESC_3 UDI_CDC_COMM_DESC(3) @@ -196,13 +196,13 @@ typedef struct { //! By default no string associated to these interfaces #ifndef UDI_CDC_IAD_STRING_ID_4 -#define UDI_CDC_IAD_STRING_ID_4 0 + #define UDI_CDC_IAD_STRING_ID_4 0 #endif #ifndef UDI_CDC_COMM_STRING_ID_4 -#define UDI_CDC_COMM_STRING_ID_4 0 + #define UDI_CDC_COMM_STRING_ID_4 0 #endif #ifndef UDI_CDC_DATA_STRING_ID_4 -#define UDI_CDC_DATA_STRING_ID_4 0 + #define UDI_CDC_DATA_STRING_ID_4 0 #endif #define UDI_CDC_IAD_DESC_4 UDI_CDC_IAD_DESC(4) #define UDI_CDC_COMM_DESC_4 UDI_CDC_COMM_DESC(4) @@ -211,13 +211,13 @@ typedef struct { //! By default no string associated to these interfaces #ifndef UDI_CDC_IAD_STRING_ID_5 -#define UDI_CDC_IAD_STRING_ID_5 0 + #define UDI_CDC_IAD_STRING_ID_5 0 #endif #ifndef UDI_CDC_COMM_STRING_ID_5 -#define UDI_CDC_COMM_STRING_ID_5 0 + #define UDI_CDC_COMM_STRING_ID_5 0 #endif #ifndef UDI_CDC_DATA_STRING_ID_5 -#define UDI_CDC_DATA_STRING_ID_5 0 + #define UDI_CDC_DATA_STRING_ID_5 0 #endif #define UDI_CDC_IAD_DESC_5 UDI_CDC_IAD_DESC(5) #define UDI_CDC_COMM_DESC_5 UDI_CDC_COMM_DESC(5) @@ -226,13 +226,13 @@ typedef struct { //! By default no string associated to these interfaces #ifndef UDI_CDC_IAD_STRING_ID_6 -#define UDI_CDC_IAD_STRING_ID_6 0 + #define UDI_CDC_IAD_STRING_ID_6 0 #endif #ifndef UDI_CDC_COMM_STRING_ID_6 -#define UDI_CDC_COMM_STRING_ID_6 0 + #define UDI_CDC_COMM_STRING_ID_6 0 #endif #ifndef UDI_CDC_DATA_STRING_ID_6 -#define UDI_CDC_DATA_STRING_ID_6 0 + #define UDI_CDC_DATA_STRING_ID_6 0 #endif #define UDI_CDC_IAD_DESC_6 UDI_CDC_IAD_DESC(6) #define UDI_CDC_COMM_DESC_6 UDI_CDC_COMM_DESC(6) @@ -240,7 +240,6 @@ typedef struct { #define UDI_CDC_DATA_DESC_6_HS UDI_CDC_DATA_DESC_HS(6) //@} - //! Content of CDC IAD interface descriptor for all speeds #define UDI_CDC_IAD_DESC(port) { \ .bLength = sizeof(usb_iad_desc_t),\ @@ -270,7 +269,7 @@ typedef struct { .call_mgmt.bDescriptorType = CDC_CS_INTERFACE,\ .call_mgmt.bDescriptorSubtype = CDC_SCS_CALL_MGMT,\ .call_mgmt.bmCapabilities = \ - CDC_CALL_MGMT_SUPPORTED | CDC_CALL_MGMT_OVER_DCI,\ + CDC_CALL_MGMT_SUPPORTED | CDC_CALL_MGMT_OVER_DCI,\ .acm.bFunctionLength = sizeof(usb_cdc_acm_desc_t),\ .acm.bDescriptorType = CDC_CS_INTERFACE,\ .acm.bDescriptorSubtype = CDC_SCS_ACM,\ @@ -610,40 +609,37 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s * \subsection udi_cdc_basic_use_case_usage_code Example code * Content of conf_usb.h: * \code - #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable() - extern bool my_callback_cdc_enable(void); - #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable() - extern void my_callback_cdc_disable(void); - #define UDI_CDC_LOW_RATE - - #define UDI_CDC_DEFAULT_RATE 115200 - #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 - #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE - #define UDI_CDC_DEFAULT_DATABITS 8 - - #include "udi_cdc_conf.h" // At the end of conf_usb.h file + #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable() + extern bool my_callback_cdc_enable(void); + #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable() + extern void my_callback_cdc_disable(void); + #define UDI_CDC_LOW_RATE + + #define UDI_CDC_DEFAULT_RATE 115200 + #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 + #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE + #define UDI_CDC_DEFAULT_DATABITS 8 + + #include "udi_cdc_conf.h" // At the end of conf_usb.h file \endcode * * Add to application C-file: * \code - static bool my_flag_autorize_cdc_transfert = false; - bool my_callback_cdc_enable(void) - { - my_flag_autorize_cdc_transfert = true; - return true; - } - void my_callback_cdc_disable(void) - { - my_flag_autorize_cdc_transfert = false; - } - - void task(void) - { - if (my_flag_autorize_cdc_transfert) { - udi_cdc_putc('A'); - udi_cdc_getc(); - } - } + static bool my_flag_autorize_cdc_transfert = false; + bool my_callback_cdc_enable(void) { + my_flag_autorize_cdc_transfert = true; + return true; + } + void my_callback_cdc_disable(void) { + my_flag_autorize_cdc_transfert = false; + } + + void task(void) { + if (my_flag_autorize_cdc_transfert) { + udi_cdc_putc('A'); + udi_cdc_getc(); + } + } \endcode * * \subsection udi_cdc_basic_use_case_setup_flow Workflow @@ -652,14 +648,14 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s * - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for CDC \endcode * \note The USB serial number is mandatory when a CDC interface is used. * - \code #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable() - extern bool my_callback_cdc_enable(void); \endcode + extern bool my_callback_cdc_enable(void); \endcode * \note After the device enumeration (detecting and identifying USB devices), * the USB host starts the device configuration. When the USB CDC interface * from the device is accepted by the host, the USB host enables this interface and the * UDI_CDC_ENABLE_EXT() callback function is called and return true. * Thus, when this event is received, the data transfer on CDC interface are authorized. * - \code #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable() - extern void my_callback_cdc_disable(void); \endcode + extern void my_callback_cdc_disable(void); \endcode * \note When the USB device is unplugged or is reset by the USB host, the USB * interface is disabled and the UDI_CDC_DISABLE_EXT() callback function * is called. Thus, the data transfer must be stopped on CDC interface. @@ -667,19 +663,19 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s * \note Define it when the transfer CDC Device to Host is a low rate * (<512000 bauds) to reduce CDC buffers size. * - \code #define UDI_CDC_DEFAULT_RATE 115200 - #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 - #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE - #define UDI_CDC_DEFAULT_DATABITS 8 \endcode + #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 + #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE + #define UDI_CDC_DEFAULT_DATABITS 8 \endcode * \note Default configuration of communication port at startup. * -# Send or wait data on CDC line: * - \code // Waits and gets a value on CDC line - int udi_cdc_getc(void); - // Reads a RAM buffer on CDC line - iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size); - // Puts a byte on CDC line - int udi_cdc_putc(int value); - // Writes a RAM buffer on CDC line - iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode + int udi_cdc_getc(void); + // Reads a RAM buffer on CDC line + iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size); + // Puts a byte on CDC line + int udi_cdc_putc(int value); + // Writes a RAM buffer on CDC line + iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode * * \section udi_cdc_use_cases Advanced use cases * For more advanced use of the UDI CDC module, see the following use cases: @@ -713,90 +709,90 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s * \subsection udi_cdc_use_case_composite_usage_code Example code * Content of conf_usb.h: * \code - #define USB_DEVICE_EP_CTRL_SIZE 64 - #define USB_DEVICE_NB_INTERFACE (X+2) - #define USB_DEVICE_MAX_EP (X+3) - - #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX - #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX - #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint - #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0 - #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 - - #define UDI_COMPOSITE_DESC_T \ - usb_iad_desc_t udi_cdc_iad; \ - udi_cdc_comm_desc_t udi_cdc_comm; \ - udi_cdc_data_desc_t udi_cdc_data; \ - ... - #define UDI_COMPOSITE_DESC_FS \ - .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ - .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ - .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \ - ... - #define UDI_COMPOSITE_DESC_HS \ - .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ - .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ - .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \ - ... - #define UDI_COMPOSITE_API \ - &udi_api_cdc_comm, \ - &udi_api_cdc_data, \ - ... + #define USB_DEVICE_EP_CTRL_SIZE 64 + #define USB_DEVICE_NB_INTERFACE (X+2) + #define USB_DEVICE_MAX_EP (X+3) + + #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX + #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX + #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint + #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0 + #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 + + #define UDI_COMPOSITE_DESC_T \ + usb_iad_desc_t udi_cdc_iad; \ + udi_cdc_comm_desc_t udi_cdc_comm; \ + udi_cdc_data_desc_t udi_cdc_data; \ + ... + #define UDI_COMPOSITE_DESC_FS \ + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \ + ... + #define UDI_COMPOSITE_DESC_HS \ + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \ + ... + #define UDI_COMPOSITE_API \ + &udi_api_cdc_comm, \ + &udi_api_cdc_data, \ + ... \endcode * * \subsection udi_cdc_use_case_composite_usage_flow Workflow * -# Ensure that conf_usb.h is available and contains the following parameters * required for a USB composite device configuration: * - \code // Endpoint control size, This must be: - // - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM) - // - 64 for a high speed device - #define USB_DEVICE_EP_CTRL_SIZE 64 - // Total Number of interfaces on this USB device. - // Add 2 for CDC. - #define USB_DEVICE_NB_INTERFACE (X+2) - // Total number of endpoints on this USB device. - // This must include each endpoint for each interface. - // Add 3 for CDC. - #define USB_DEVICE_MAX_EP (X+3) \endcode + // - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM) + // - 64 for a high speed device + #define USB_DEVICE_EP_CTRL_SIZE 64 + // Total Number of interfaces on this USB device. + // Add 2 for CDC. + #define USB_DEVICE_NB_INTERFACE (X+2) + // Total number of endpoints on this USB device. + // This must include each endpoint for each interface. + // Add 3 for CDC. + #define USB_DEVICE_MAX_EP (X+3) \endcode * -# Ensure that conf_usb.h contains the description of * composite device: * - \code // The endpoint numbers chosen by you for the CDC. - // The endpoint numbers starting from 1. - #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX - #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX - #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint - // The interface index of an interface starting from 0 - #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0 - #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 \endcode + // The endpoint numbers starting from 1. + #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX + #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX + #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint + // The interface index of an interface starting from 0 + #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0 + #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 \endcode * -# Ensure that conf_usb.h contains the following parameters * required for a USB composite device configuration: * - \code // USB Interfaces descriptor structure - #define UDI_COMPOSITE_DESC_T \ - ... - usb_iad_desc_t udi_cdc_iad; \ - udi_cdc_comm_desc_t udi_cdc_comm; \ - udi_cdc_data_desc_t udi_cdc_data; \ - ... - // USB Interfaces descriptor value for Full Speed - #define UDI_COMPOSITE_DESC_FS \ - ... - .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ - .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ - .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \ - ... - // USB Interfaces descriptor value for High Speed - #define UDI_COMPOSITE_DESC_HS \ - ... - .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ - .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ - .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \ - ... - // USB Interface APIs - #define UDI_COMPOSITE_API \ - ... - &udi_api_cdc_comm, \ - &udi_api_cdc_data, \ - ... \endcode + #define UDI_COMPOSITE_DESC_T \ + ... + usb_iad_desc_t udi_cdc_iad; \ + udi_cdc_comm_desc_t udi_cdc_comm; \ + udi_cdc_data_desc_t udi_cdc_data; \ + ... + // USB Interfaces descriptor value for Full Speed + #define UDI_COMPOSITE_DESC_FS \ + ... + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \ + ... + // USB Interfaces descriptor value for High Speed + #define UDI_COMPOSITE_DESC_HS \ + ... + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \ + ... + // USB Interface APIs + #define UDI_COMPOSITE_API \ + ... + &udi_api_cdc_comm, \ + &udi_api_cdc_data, \ + ... \endcode * - \note The descriptors order given in the four lists above must be the * same as the order defined by all interface indexes. The interface index * orders are defined through UDI_X_IFACE_NUMBER defines.\n diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.c b/Marlin/src/HAL/DUE/usb/udi_msc.c index a75b5936b338..3f70a8fb18bc 100644 --- a/Marlin/src/HAL/DUE/usb/udi_msc.c +++ b/Marlin/src/HAL/DUE/usb/udi_msc.c @@ -372,9 +372,7 @@ static void udi_msc_sbc_trans(bool b_read); //@} - -bool udi_msc_enable(void) -{ +bool udi_msc_enable(void) { uint8_t lun; udi_msc_b_trans_req = false; udi_msc_b_cbw_invalid = false; @@ -397,18 +395,14 @@ bool udi_msc_enable(void) return true; } - -void udi_msc_disable(void) -{ +void udi_msc_disable(void) { udi_msc_b_trans_req = false; udi_msc_b_ack_trans = true; udi_msc_b_reset_trans = true; UDI_MSC_DISABLE_EXT(); } - -bool udi_msc_setup(void) -{ +bool udi_msc_setup(void) { if (Udd_setup_is_in()) { // Requests Interface GET if (Udd_setup_type() == USB_REQ_TYPE_CLASS) { @@ -451,17 +445,14 @@ bool udi_msc_setup(void) return false; // Not supported request } -uint8_t udi_msc_getsetting(void) -{ +uint8_t udi_msc_getsetting(void) { return 0; // MSC don't have multiple alternate setting } - // ------------------------ //------- Routines to process CBW packet -static void udi_msc_cbw_invalid(void) -{ +static void udi_msc_cbw_invalid(void) { if (!udi_msc_b_cbw_invalid) return; // Don't re-stall endpoint if error reset by setup udd_ep_set_halt(UDI_MSC_EP_OUT); @@ -469,8 +460,7 @@ static void udi_msc_cbw_invalid(void) udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_invalid); } -static void udi_msc_csw_invalid(void) -{ +static void udi_msc_csw_invalid(void) { if (!udi_msc_b_cbw_invalid) return; // Don't re-stall endpoint if error reset by setup udd_ep_set_halt(UDI_MSC_EP_IN); @@ -478,8 +468,7 @@ static void udi_msc_csw_invalid(void) udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_invalid); } -static void udi_msc_cbw_wait(void) -{ +static void udi_msc_cbw_wait(void) { // Register buffer and callback on OUT endpoint if (!udd_ep_run(UDI_MSC_EP_OUT, true, (uint8_t *) & udi_msc_cbw, @@ -490,10 +479,8 @@ static void udi_msc_cbw_wait(void) } } - static void udi_msc_cbw_received(udd_ep_status_t status, - iram_size_t nb_received, udd_ep_id_t ep) -{ + iram_size_t nb_received, udd_ep_id_t ep) { UNUSED(ep); // Check status of transfer if (UDD_EP_TRANSFER_OK != status) { @@ -582,9 +569,7 @@ static void udi_msc_cbw_received(udd_ep_status_t status, } } - -static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag) -{ +static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag) { /* * The following cases should result in a phase error: * - Case 2: Hn < Di @@ -612,12 +597,10 @@ static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag) return true; } - // ------------------------ //------- Routines to process small data packet -static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size) -{ +static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size) { // Sends data on IN endpoint if (!udd_ep_run(UDI_MSC_EP_IN, true, buffer, buf_size, udi_msc_data_sent)) { @@ -627,10 +610,8 @@ static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size) } } - static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent, - udd_ep_id_t ep) -{ + udd_ep_id_t ep) { UNUSED(ep); if (UDD_EP_TRANSFER_OK != status) { // Error protocol @@ -644,12 +625,10 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent, udi_msc_csw_process(); } - // ------------------------ //------- Routines to process CSW packet -static void udi_msc_csw_process(void) -{ +static void udi_msc_csw_process(void) { if (0 != udi_msc_csw.dCSWDataResidue) { // Residue not NULL // then STALL next request from USB host on corresponding endpoint @@ -664,9 +643,7 @@ static void udi_msc_csw_process(void) udi_msc_csw_send(); } - -void udi_msc_csw_send(void) -{ +void udi_msc_csw_send(void) { // Sends CSW on IN endpoint if (!udd_ep_run(UDI_MSC_EP_IN, false, (uint8_t *) & udi_msc_csw, @@ -678,10 +655,8 @@ void udi_msc_csw_send(void) } } - static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent, - udd_ep_id_t ep) -{ + udd_ep_id_t ep) { UNUSED(ep); UNUSED(status); UNUSED(nb_sent); @@ -690,20 +665,17 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent, udi_msc_cbw_wait(); } - // ------------------------ //------- Routines manage sense data -static void udi_msc_clear_sense(void) -{ +static void udi_msc_clear_sense(void) { memset((uint8_t*)&udi_msc_sense, 0, sizeof(struct scsi_request_sense_data)); udi_msc_sense.valid_reponse_code = SCSI_SENSE_VALID | SCSI_SENSE_CURRENT; udi_msc_sense.AddSenseLen = SCSI_SENSE_ADDL_LEN(sizeof(udi_msc_sense)); } static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense, - uint32_t lba) -{ + uint32_t lba) { udi_msc_clear_sense(); udi_msc_csw.bCSWStatus = USB_CSW_STATUS_FAIL; udi_msc_sense.sense_flag_key = sense_key; @@ -715,53 +687,39 @@ static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense, udi_msc_sense.AddSnsCodeQlfr = add_sense; } -static void udi_msc_sense_pass(void) -{ +static void udi_msc_sense_pass(void) { udi_msc_clear_sense(); udi_msc_csw.bCSWStatus = USB_CSW_STATUS_PASS; } - -static void udi_msc_sense_fail_not_present(void) -{ +static void udi_msc_sense_fail_not_present(void) { udi_msc_sense_fail(SCSI_SK_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT, 0); } -static void udi_msc_sense_fail_busy_or_change(void) -{ - udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION, - SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0); +static void udi_msc_sense_fail_busy_or_change(void) { + udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION, SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0); } -static void udi_msc_sense_fail_hardware(void) -{ - udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR, - SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0); +static void udi_msc_sense_fail_hardware(void) { + udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR, SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0); } -static void udi_msc_sense_fail_protected(void) -{ +static void udi_msc_sense_fail_protected(void) { udi_msc_sense_fail(SCSI_SK_DATA_PROTECT, SCSI_ASC_WRITE_PROTECTED, 0); } -static void udi_msc_sense_fail_cdb_invalid(void) -{ - udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, - SCSI_ASC_INVALID_FIELD_IN_CDB, 0); +static void udi_msc_sense_fail_cdb_invalid(void) { + udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, SCSI_ASC_INVALID_FIELD_IN_CDB, 0); } -static void udi_msc_sense_command_invalid(void) -{ - udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, - SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0); +static void udi_msc_sense_command_invalid(void) { + udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0); } - // ------------------------ //------- Routines manage SCSI Commands -static void udi_msc_spc_requestsense(void) -{ +static void udi_msc_spc_requestsense(void) { uint8_t length = udi_msc_cbw.CDB[4]; // Can't send more than sense data length @@ -774,9 +732,7 @@ static void udi_msc_spc_requestsense(void) udi_msc_data_send((uint8_t*)&udi_msc_sense, length); } - -static void udi_msc_spc_inquiry(void) -{ +static void udi_msc_spc_inquiry(void) { uint8_t length, i; UDC_DATA(4) // Constant inquiry data for all LUNs @@ -835,9 +791,7 @@ static void udi_msc_spc_inquiry(void) udi_msc_data_send((uint8_t *) & udi_msc_inquiry_data, length); } - -static bool udi_msc_spc_testunitready_global(void) -{ +static bool udi_msc_spc_testunitready_global(void) { switch (mem_test_unit_ready(udi_msc_cbw.bCBWLUN)) { case CTRL_GOOD: return true; // Don't change sense data @@ -855,9 +809,7 @@ static bool udi_msc_spc_testunitready_global(void) return false; } - -static void udi_msc_spc_testunitready(void) -{ +static void udi_msc_spc_testunitready(void) { if (udi_msc_spc_testunitready_global()) { // LUN ready, then update sense data with status pass udi_msc_sense_pass(); @@ -866,9 +818,7 @@ static void udi_msc_spc_testunitready(void) udi_msc_csw_process(); } - -static void udi_msc_spc_mode_sense(bool b_sense10) -{ +static void udi_msc_spc_mode_sense(bool b_sense10) { // Union of all mode sense structures union sense_6_10 { struct { @@ -943,9 +893,7 @@ static void udi_msc_spc_mode_sense(bool b_sense10) udi_msc_data_send((uint8_t *) & sense, request_lgt); } - -static void udi_msc_spc_prevent_allow_medium_removal(void) -{ +static void udi_msc_spc_prevent_allow_medium_removal(void) { uint8_t prevent = udi_msc_cbw.CDB[4]; if (0 == prevent) { udi_msc_sense_pass(); @@ -955,9 +903,7 @@ static void udi_msc_spc_prevent_allow_medium_removal(void) udi_msc_csw_process(); } - -static void udi_msc_sbc_start_stop(void) -{ +static void udi_msc_sbc_start_stop(void) { bool start = 0x1 & udi_msc_cbw.CDB[4]; bool loej = 0x2 & udi_msc_cbw.CDB[4]; if (loej) { @@ -967,9 +913,7 @@ static void udi_msc_sbc_start_stop(void) udi_msc_csw_process(); } - -static void udi_msc_sbc_read_capacity(void) -{ +static void udi_msc_sbc_read_capacity(void) { UDC_BSS(4) static struct sbc_read_capacity10_data udi_msc_capacity; if (!udi_msc_cbw_validate(sizeof(udi_msc_capacity), @@ -1003,9 +947,7 @@ static void udi_msc_sbc_read_capacity(void) sizeof(udi_msc_capacity)); } - -static void udi_msc_sbc_trans(bool b_read) -{ +static void udi_msc_sbc_trans(bool b_read) { uint32_t trans_size; if (!b_read) { @@ -1038,9 +980,7 @@ static void udi_msc_sbc_trans(bool b_read) UDI_MSC_NOTIFY_TRANS_EXT(); } - -bool udi_msc_process_trans(void) -{ +bool udi_msc_process_trans(void) { Ctrl_status status; if (!udi_msc_b_trans_req) @@ -1084,10 +1024,8 @@ bool udi_msc_process_trans(void) return true; } - static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n, - udd_ep_id_t ep) -{ + udd_ep_id_t ep) { UNUSED(ep); UNUSED(n); // Update variable to signal the end of transfer @@ -1095,10 +1033,8 @@ static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n, udi_msc_b_ack_trans = true; } - bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, - void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)) -{ + void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)) { if (!udi_msc_b_ack_trans) return false; // No possible, transfer on going diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.h b/Marlin/src/HAL/DUE/usb/udi_msc.h index 730dbc8eec56..0ede4d6a8346 100644 --- a/Marlin/src/HAL/DUE/usb/udi_msc.h +++ b/Marlin/src/HAL/DUE/usb/udi_msc.h @@ -77,9 +77,9 @@ extern UDC_DESC_STORAGE udi_api_t udi_api_msc; //! Interface descriptor structure for MSC typedef struct { - usb_iface_desc_t iface; - usb_ep_desc_t ep_in; - usb_ep_desc_t ep_out; + usb_iface_desc_t iface; + usb_ep_desc_t ep_in; + usb_ep_desc_t ep_out; } udi_msc_desc_t; //! By default no string associated to this interface @@ -94,32 +94,32 @@ typedef struct { //! Content of MSC interface descriptor for all speeds #define UDI_MSC_DESC \ - .iface.bLength = sizeof(usb_iface_desc_t),\ - .iface.bDescriptorType = USB_DT_INTERFACE,\ - .iface.bInterfaceNumber = UDI_MSC_IFACE_NUMBER,\ - .iface.bAlternateSetting = 0,\ - .iface.bNumEndpoints = 2,\ - .iface.bInterfaceClass = MSC_CLASS,\ - .iface.bInterfaceSubClass = MSC_SUBCLASS_TRANSPARENT,\ - .iface.bInterfaceProtocol = MSC_PROTOCOL_BULK,\ - .iface.iInterface = UDI_MSC_STRING_ID,\ - .ep_in.bLength = sizeof(usb_ep_desc_t),\ - .ep_in.bDescriptorType = USB_DT_ENDPOINT,\ - .ep_in.bEndpointAddress = UDI_MSC_EP_IN,\ - .ep_in.bmAttributes = USB_EP_TYPE_BULK,\ - .ep_in.bInterval = 0,\ - .ep_out.bLength = sizeof(usb_ep_desc_t),\ - .ep_out.bDescriptorType = USB_DT_ENDPOINT,\ - .ep_out.bEndpointAddress = UDI_MSC_EP_OUT,\ - .ep_out.bmAttributes = USB_EP_TYPE_BULK,\ - .ep_out.bInterval = 0, + .iface.bLength = sizeof(usb_iface_desc_t),\ + .iface.bDescriptorType = USB_DT_INTERFACE,\ + .iface.bInterfaceNumber = UDI_MSC_IFACE_NUMBER,\ + .iface.bAlternateSetting = 0,\ + .iface.bNumEndpoints = 2,\ + .iface.bInterfaceClass = MSC_CLASS,\ + .iface.bInterfaceSubClass = MSC_SUBCLASS_TRANSPARENT,\ + .iface.bInterfaceProtocol = MSC_PROTOCOL_BULK,\ + .iface.iInterface = UDI_MSC_STRING_ID,\ + .ep_in.bLength = sizeof(usb_ep_desc_t),\ + .ep_in.bDescriptorType = USB_DT_ENDPOINT,\ + .ep_in.bEndpointAddress = UDI_MSC_EP_IN,\ + .ep_in.bmAttributes = USB_EP_TYPE_BULK,\ + .ep_in.bInterval = 0,\ + .ep_out.bLength = sizeof(usb_ep_desc_t),\ + .ep_out.bDescriptorType = USB_DT_ENDPOINT,\ + .ep_out.bEndpointAddress = UDI_MSC_EP_OUT,\ + .ep_out.bmAttributes = USB_EP_TYPE_BULK,\ + .ep_out.bInterval = 0, //! Content of MSC interface descriptor for full speed only #define UDI_MSC_DESC_FS {\ - UDI_MSC_DESC \ - .ep_in.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\ - .ep_out.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\ - } + UDI_MSC_DESC \ + .ep_in.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\ + .ep_out.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\ + } //! Content of MSC interface descriptor for high speed only #define UDI_MSC_DESC_HS {\ @@ -129,7 +129,6 @@ typedef struct { } //@} - /** * \ingroup udi_group * \defgroup udi_msc_group USB Device Interface (UDI) for Mass Storage Class (MSC) @@ -163,14 +162,13 @@ bool udi_msc_process_trans(void); * \return \c 1 if function was successfully done, otherwise \c 0. */ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, - void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)); + void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)); //@} #ifdef __cplusplus } #endif - /** * \page udi_msc_quickstart Quick start guide for USB device Mass Storage module (UDI MSC) * @@ -200,35 +198,32 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, * \subsection udi_msc_basic_use_case_usage_code Example code * Content of conf_usb.h: * \code - #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC - #define UDI_MSC_GLOBAL_VENDOR_ID \ - 'A', 'T', 'M', 'E', 'L', ' ', ' ', ' ' - #define UDI_MSC_GLOBAL_PRODUCT_VERSION \ - '1', '.', '0', '0' - #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable() - extern bool my_callback_msc_enable(void); - #define UDI_MSC_DISABLE_EXT() my_callback_msc_disable() - extern void my_callback_msc_disable(void); - #include "udi_msc_conf.h" // At the end of conf_usb.h file + #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC + #define UDI_MSC_GLOBAL_VENDOR_ID \ + 'A', 'T', 'M', 'E', 'L', ' ', ' ', ' ' + #define UDI_MSC_GLOBAL_PRODUCT_VERSION \ + '1', '.', '0', '0' + #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable() + extern bool my_callback_msc_enable(void); + #define UDI_MSC_DISABLE_EXT() my_callback_msc_disable() + extern void my_callback_msc_disable(void); + #include "udi_msc_conf.h" // At the end of conf_usb.h file \endcode * * Add to application C-file: * \code - static bool my_flag_autorize_msc_transfert = false; - bool my_callback_msc_enable(void) - { - my_flag_autorize_msc_transfert = true; - return true; - } - void my_callback_msc_disable(void) - { - my_flag_autorize_msc_transfert = false; - } + static bool my_flag_autorize_msc_transfert = false; + bool my_callback_msc_enable(void) { + my_flag_autorize_msc_transfert = true; + return true; + } + void my_callback_msc_disable(void) { + my_flag_autorize_msc_transfert = false; + } - void task(void) - { - udi_msc_process_trans(); - } + void task(void) { + udi_msc_process_trans(); + } \endcode * * \subsection udi_msc_basic_use_case_setup_flow Workflow @@ -237,14 +232,14 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, * - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC \endcode * \note The USB serial number is mandatory when a MSC interface is used. * - \code //! Vendor name and Product version of MSC interface - #define UDI_MSC_GLOBAL_VENDOR_ID \ - 'A', 'T', 'M', 'E', 'L', ' ', ' ', ' ' - #define UDI_MSC_GLOBAL_PRODUCT_VERSION \ - '1', '.', '0', '0' \endcode + #define UDI_MSC_GLOBAL_VENDOR_ID \ + 'A', 'T', 'M', 'E', 'L', ' ', ' ', ' ' + #define UDI_MSC_GLOBAL_PRODUCT_VERSION \ + '1', '.', '0', '0' \endcode * \note The USB MSC interface requires a vendor ID (8 ASCII characters) * and a product version (4 ASCII characters). * - \code #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable() - extern bool my_callback_msc_enable(void); \endcode + extern bool my_callback_msc_enable(void); \endcode * \note After the device enumeration (detecting and identifying USB devices), * the USB host starts the device configuration. When the USB MSC interface * from the device is accepted by the host, the USB host enables this interface and the @@ -252,7 +247,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, * Thus, when this event is received, the tasks which call * udi_msc_process_trans() must be enabled. * - \code #define UDI_MSC_DISABLE_EXT() my_callback_msc_disable() - extern void my_callback_msc_disable(void); \endcode + extern void my_callback_msc_disable(void); \endcode * \note When the USB device is unplugged or is reset by the USB host, the USB * interface is disabled and the UDI_MSC_DISABLE_EXT() callback function * is called. Thus, it is recommended to disable the task which is called udi_msc_process_trans(). @@ -261,15 +256,15 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, * must be done outside USB interrupt routine. This is done in the MSC process * ("udi_msc_process_trans()") called by main loop: * - \code * void task(void) { - udi_msc_process_trans(); - } \endcode + udi_msc_process_trans(); + } \endcode * -# The MSC speed depends on task periodicity. To get the best speed * the notification callback "UDI_MSC_NOTIFY_TRANS_EXT" can be used to wakeup * this task (Example, through a mutex): * - \code #define UDI_MSC_NOTIFY_TRANS_EXT() msc_notify_trans() - void msc_notify_trans(void) { - wakeup_my_task(); - } \endcode + void msc_notify_trans(void) { + wakeup_my_task(); + } \endcode * * \section udi_msc_use_cases Advanced use cases * For more advanced use of the UDI MSC module, see the following use cases: @@ -302,72 +297,72 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, * \subsection udi_msc_use_case_composite_usage_code Example code * Content of conf_usb.h: * \code - #define USB_DEVICE_EP_CTRL_SIZE 64 - #define USB_DEVICE_NB_INTERFACE (X+1) - #define USB_DEVICE_MAX_EP (X+2) + #define USB_DEVICE_EP_CTRL_SIZE 64 + #define USB_DEVICE_NB_INTERFACE (X+1) + #define USB_DEVICE_MAX_EP (X+2) - #define UDI_MSC_EP_IN (X | USB_EP_DIR_IN) - #define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT) - #define UDI_MSC_IFACE_NUMBER X + #define UDI_MSC_EP_IN (X | USB_EP_DIR_IN) + #define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT) + #define UDI_MSC_IFACE_NUMBER X - #define UDI_COMPOSITE_DESC_T \ - udi_msc_desc_t udi_msc; \ - ... - #define UDI_COMPOSITE_DESC_FS \ - .udi_msc = UDI_MSC_DESC, \ - ... - #define UDI_COMPOSITE_DESC_HS \ - .udi_msc = UDI_MSC_DESC, \ - ... - #define UDI_COMPOSITE_API \ - &udi_api_msc, \ - ... + #define UDI_COMPOSITE_DESC_T \ + udi_msc_desc_t udi_msc; \ + ... + #define UDI_COMPOSITE_DESC_FS \ + .udi_msc = UDI_MSC_DESC, \ + ... + #define UDI_COMPOSITE_DESC_HS \ + .udi_msc = UDI_MSC_DESC, \ + ... + #define UDI_COMPOSITE_API \ + &udi_api_msc, \ + ... \endcode * * \subsection udi_msc_use_case_composite_usage_flow Workflow * -# Ensure that conf_usb.h is available and contains the following parameters * required for a USB composite device configuration: * - \code // Endpoint control size, This must be: - // - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM) - // - 64 for a high speed device - #define USB_DEVICE_EP_CTRL_SIZE 64 - // Total Number of interfaces on this USB device. - // Add 1 for MSC. - #define USB_DEVICE_NB_INTERFACE (X+1) - // Total number of endpoints on this USB device. - // This must include each endpoint for each interface. - // Add 2 for MSC. - #define USB_DEVICE_MAX_EP (X+2) \endcode + // - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM) + // - 64 for a high speed device + #define USB_DEVICE_EP_CTRL_SIZE 64 + // Total Number of interfaces on this USB device. + // Add 1 for MSC. + #define USB_DEVICE_NB_INTERFACE (X+1) + // Total number of endpoints on this USB device. + // This must include each endpoint for each interface. + // Add 2 for MSC. + #define USB_DEVICE_MAX_EP (X+2) \endcode * -# Ensure that conf_usb.h contains the description of * composite device: * - \code // The endpoint numbers chosen by you for the MSC. - // The endpoint numbers starting from 1. - #define UDI_MSC_EP_IN (X | USB_EP_DIR_IN) - #define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT) - // The interface index of an interface starting from 0 - #define UDI_MSC_IFACE_NUMBER X \endcode + // The endpoint numbers starting from 1. + #define UDI_MSC_EP_IN (X | USB_EP_DIR_IN) + #define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT) + // The interface index of an interface starting from 0 + #define UDI_MSC_IFACE_NUMBER X \endcode * -# Ensure that conf_usb.h contains the following parameters * required for a USB composite device configuration: * - \code // USB Interfaces descriptor structure - #define UDI_COMPOSITE_DESC_T \ - ... - udi_msc_desc_t udi_msc; \ - ... - // USB Interfaces descriptor value for Full Speed - #define UDI_COMPOSITE_DESC_FS \ - ... - .udi_msc = UDI_MSC_DESC_FS, \ - ... - // USB Interfaces descriptor value for High Speed - #define UDI_COMPOSITE_DESC_HS \ - ... - .udi_msc = UDI_MSC_DESC_HS, \ - ... - // USB Interface APIs - #define UDI_COMPOSITE_API \ - ... - &udi_api_msc, \ - ... \endcode + #define UDI_COMPOSITE_DESC_T \ + ... + udi_msc_desc_t udi_msc; \ + ... + // USB Interfaces descriptor value for Full Speed + #define UDI_COMPOSITE_DESC_FS \ + ... + .udi_msc = UDI_MSC_DESC_FS, \ + ... + // USB Interfaces descriptor value for High Speed + #define UDI_COMPOSITE_DESC_HS \ + ... + .udi_msc = UDI_MSC_DESC_HS, \ + ... + // USB Interface APIs + #define UDI_COMPOSITE_API \ + ... + &udi_api_msc, \ + ... \endcode * - \note The descriptors order given in the four lists above must be the * same as the order defined by all interface indexes. The interface index * orders are defined through UDI_X_IFACE_NUMBER defines. diff --git a/Marlin/src/HAL/DUE/usb/uotghs_otg.h b/Marlin/src/HAL/DUE/usb/uotghs_otg.h index eca5e938bbe1..f0e55c896fac 100644 --- a/Marlin/src/HAL/DUE/usb/uotghs_otg.h +++ b/Marlin/src/HAL/DUE/usb/uotghs_otg.h @@ -127,13 +127,13 @@ void otg_dual_disable(void); //! These macros allows to enable/disable pad and UOTGHS hardware //! @{ //! Reset USB macro -#define otg_reset() \ - do { \ - UOTGHS->UOTGHS_CTRL = 0; \ - while( UOTGHS->UOTGHS_SR & 0x3FFF) {\ - UOTGHS->UOTGHS_SCR = 0xFFFFFFFF;\ - } \ - } while (0) +#define otg_reset() \ + do { \ + UOTGHS->UOTGHS_CTRL = 0; \ + while( UOTGHS->UOTGHS_SR & 0x3FFF) { \ + UOTGHS->UOTGHS_SCR = 0xFFFFFFFF; \ + } \ + } while (0) //! Enable USB macro #define otg_enable() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE)) //! Disable USB macro @@ -157,15 +157,14 @@ void otg_dual_disable(void); //! Configure time-out of specified OTG timer #define otg_configure_timeout(timer, timeout) (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\ - Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\ - Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk, timeout),\ - Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK)) + Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\ + Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk, timeout),\ + Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK)) //! Get configured time-out of specified OTG timer #define otg_get_timeout(timer) (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\ - Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\ - Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\ - Rd_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk)) - + Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\ + Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\ + Rd_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk)) //! Get the dual-role device state of the internal USB finite state machine of the UOTGHS controller #define otg_get_fsm_drd_state() (Rd_bitfield(UOTGHS->UOTGHS_FSM, UOTGHS_FSM_DRDSTATE_Msk)) diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol.h b/Marlin/src/HAL/DUE/usb/usb_protocol.h index ea51a8689649..4540247df826 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol.h @@ -108,17 +108,17 @@ * \brief Standard USB requests (bRequest) */ enum usb_reqid { - USB_REQ_GET_STATUS = 0, - USB_REQ_CLEAR_FEATURE = 1, - USB_REQ_SET_FEATURE = 3, - USB_REQ_SET_ADDRESS = 5, - USB_REQ_GET_DESCRIPTOR = 6, - USB_REQ_SET_DESCRIPTOR = 7, - USB_REQ_GET_CONFIGURATION = 8, - USB_REQ_SET_CONFIGURATION = 9, - USB_REQ_GET_INTERFACE = 10, - USB_REQ_SET_INTERFACE = 11, - USB_REQ_SYNCH_FRAME = 12, + USB_REQ_GET_STATUS = 0, + USB_REQ_CLEAR_FEATURE = 1, + USB_REQ_SET_FEATURE = 3, + USB_REQ_SET_ADDRESS = 5, + USB_REQ_GET_DESCRIPTOR = 6, + USB_REQ_SET_DESCRIPTOR = 7, + USB_REQ_GET_CONFIGURATION = 8, + USB_REQ_SET_CONFIGURATION = 9, + USB_REQ_GET_INTERFACE = 10, + USB_REQ_SET_INTERFACE = 11, + USB_REQ_SYNCH_FRAME = 12, }; /** @@ -126,9 +126,9 @@ enum usb_reqid { * */ enum usb_device_status { - USB_DEV_STATUS_BUS_POWERED = 0, - USB_DEV_STATUS_SELF_POWERED = 1, - USB_DEV_STATUS_REMOTEWAKEUP = 2 + USB_DEV_STATUS_BUS_POWERED = 0, + USB_DEV_STATUS_SELF_POWERED = 1, + USB_DEV_STATUS_REMOTEWAKEUP = 2 }; /** @@ -136,7 +136,7 @@ enum usb_device_status { * */ enum usb_interface_status { - USB_IFACE_STATUS_RESERVED = 0 + USB_IFACE_STATUS_RESERVED = 0 }; /** @@ -144,7 +144,7 @@ enum usb_interface_status { * */ enum usb_endpoint_status { - USB_EP_STATUS_HALTED = 1, + USB_EP_STATUS_HALTED = 1, }; /** @@ -153,11 +153,11 @@ enum usb_endpoint_status { * \note valid for SetFeature request. */ enum usb_device_feature { - USB_DEV_FEATURE_REMOTE_WAKEUP = 1, //!< Remote wakeup enabled - USB_DEV_FEATURE_TEST_MODE = 2, //!< USB test mode - USB_DEV_FEATURE_OTG_B_HNP_ENABLE = 3, - USB_DEV_FEATURE_OTG_A_HNP_SUPPORT = 4, - USB_DEV_FEATURE_OTG_A_ALT_HNP_SUPPORT = 5 + USB_DEV_FEATURE_REMOTE_WAKEUP = 1, //!< Remote wakeup enabled + USB_DEV_FEATURE_TEST_MODE = 2, //!< USB test mode + USB_DEV_FEATURE_OTG_B_HNP_ENABLE = 3, + USB_DEV_FEATURE_OTG_A_HNP_SUPPORT = 4, + USB_DEV_FEATURE_OTG_A_ALT_HNP_SUPPORT = 5 }; /** @@ -166,54 +166,54 @@ enum usb_device_feature { * \note valid for USB_DEV_FEATURE_TEST_MODE request. */ enum usb_device_hs_test_mode { - USB_DEV_TEST_MODE_J = 1, - USB_DEV_TEST_MODE_K = 2, - USB_DEV_TEST_MODE_SE0_NAK = 3, - USB_DEV_TEST_MODE_PACKET = 4, - USB_DEV_TEST_MODE_FORCE_ENABLE = 5, + USB_DEV_TEST_MODE_J = 1, + USB_DEV_TEST_MODE_K = 2, + USB_DEV_TEST_MODE_SE0_NAK = 3, + USB_DEV_TEST_MODE_PACKET = 4, + USB_DEV_TEST_MODE_FORCE_ENABLE = 5, }; /** * \brief Standard USB endpoint feature/status flags */ enum usb_endpoint_feature { - USB_EP_FEATURE_HALT = 0, + USB_EP_FEATURE_HALT = 0, }; /** * \brief Standard USB Test Mode Selectors */ enum usb_test_mode_selector { - USB_TEST_J = 0x01, - USB_TEST_K = 0x02, - USB_TEST_SE0_NAK = 0x03, - USB_TEST_PACKET = 0x04, - USB_TEST_FORCE_ENABLE = 0x05, + USB_TEST_J = 0x01, + USB_TEST_K = 0x02, + USB_TEST_SE0_NAK = 0x03, + USB_TEST_PACKET = 0x04, + USB_TEST_FORCE_ENABLE = 0x05, }; /** * \brief Standard USB descriptor types */ enum usb_descriptor_type { - USB_DT_DEVICE = 1, - USB_DT_CONFIGURATION = 2, - USB_DT_STRING = 3, - USB_DT_INTERFACE = 4, - USB_DT_ENDPOINT = 5, - USB_DT_DEVICE_QUALIFIER = 6, - USB_DT_OTHER_SPEED_CONFIGURATION = 7, - USB_DT_INTERFACE_POWER = 8, - USB_DT_OTG = 9, - USB_DT_IAD = 0x0B, - USB_DT_BOS = 0x0F, - USB_DT_DEVICE_CAPABILITY = 0x10, + USB_DT_DEVICE = 1, + USB_DT_CONFIGURATION = 2, + USB_DT_STRING = 3, + USB_DT_INTERFACE = 4, + USB_DT_ENDPOINT = 5, + USB_DT_DEVICE_QUALIFIER = 6, + USB_DT_OTHER_SPEED_CONFIGURATION = 7, + USB_DT_INTERFACE_POWER = 8, + USB_DT_OTG = 9, + USB_DT_IAD = 0x0B, + USB_DT_BOS = 0x0F, + USB_DT_DEVICE_CAPABILITY = 0x10, }; /** * \brief USB Device Capability types */ enum usb_capability_type { - USB_DC_USB20_EXTENSION = 0x02, + USB_DC_USB20_EXTENSION = 0x02, }; /** @@ -221,7 +221,7 @@ enum usb_capability_type { * To fill bmAttributes field of usb_capa_ext_desc_t structure. */ enum usb_capability_extension_attr { - USB_DC_EXT_LPM = 0x00000002, + USB_DC_EXT_LPM = 0x00000002, }; #define HIRD_50_US 0 @@ -254,18 +254,18 @@ enum usb_capability_extension_attr { * \brief Standard USB endpoint transfer types */ enum usb_ep_type { - USB_EP_TYPE_CONTROL = 0x00, - USB_EP_TYPE_ISOCHRONOUS = 0x01, - USB_EP_TYPE_BULK = 0x02, - USB_EP_TYPE_INTERRUPT = 0x03, - USB_EP_TYPE_MASK = 0x03, + USB_EP_TYPE_CONTROL = 0x00, + USB_EP_TYPE_ISOCHRONOUS = 0x01, + USB_EP_TYPE_BULK = 0x02, + USB_EP_TYPE_INTERRUPT = 0x03, + USB_EP_TYPE_MASK = 0x03, }; /** * \brief Standard USB language IDs for string descriptors */ enum usb_langid { - USB_LANGID_EN_US = 0x0409, //!< English (United States) + USB_LANGID_EN_US = 0x0409, //!< English (United States) }; /** @@ -308,31 +308,31 @@ COMPILER_PACK_SET(1) * The data payload of SETUP packets always follows this structure. */ typedef struct { - uint8_t bmRequestType; - uint8_t bRequest; - le16_t wValue; - le16_t wIndex; - le16_t wLength; + uint8_t bmRequestType; + uint8_t bRequest; + le16_t wValue; + le16_t wIndex; + le16_t wLength; } usb_setup_req_t; /** * \brief Standard USB device descriptor structure */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; - le16_t bcdUSB; - uint8_t bDeviceClass; - uint8_t bDeviceSubClass; - uint8_t bDeviceProtocol; - uint8_t bMaxPacketSize0; - le16_t idVendor; - le16_t idProduct; - le16_t bcdDevice; - uint8_t iManufacturer; - uint8_t iProduct; - uint8_t iSerialNumber; - uint8_t bNumConfigurations; + uint8_t bLength; + uint8_t bDescriptorType; + le16_t bcdUSB; + uint8_t bDeviceClass; + uint8_t bDeviceSubClass; + uint8_t bDeviceProtocol; + uint8_t bMaxPacketSize0; + le16_t idVendor; + le16_t idProduct; + le16_t bcdDevice; + uint8_t iManufacturer; + uint8_t iProduct; + uint8_t iSerialNumber; + uint8_t bNumConfigurations; } usb_dev_desc_t; /** @@ -344,15 +344,15 @@ typedef struct { * the device was operating at full speed.) */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; - le16_t bcdUSB; - uint8_t bDeviceClass; - uint8_t bDeviceSubClass; - uint8_t bDeviceProtocol; - uint8_t bMaxPacketSize0; - uint8_t bNumConfigurations; - uint8_t bReserved; + uint8_t bLength; + uint8_t bDescriptorType; + le16_t bcdUSB; + uint8_t bDeviceClass; + uint8_t bDeviceSubClass; + uint8_t bDeviceProtocol; + uint8_t bMaxPacketSize0; + uint8_t bNumConfigurations; + uint8_t bReserved; } usb_dev_qual_desc_t; /** @@ -368,10 +368,10 @@ typedef struct { * The descriptor type in the GetDescriptor() request is set to BOS. */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; - le16_t wTotalLength; - uint8_t bNumDeviceCaps; + uint8_t bLength; + uint8_t bDescriptorType; + le16_t wTotalLength; + uint8_t bNumDeviceCaps; } usb_dev_bos_desc_t; @@ -381,10 +381,10 @@ typedef struct { * Defines the set of USB 1.1-specific device level capabilities. */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bDevCapabilityType; - le32_t bmAttributes; + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDevCapabilityType; + le32_t bmAttributes; } usb_dev_capa_ext_desc_t; /** @@ -393,22 +393,22 @@ typedef struct { * The BOS descriptor and capabilities descriptors for LPM. */ typedef struct { - usb_dev_bos_desc_t bos; - usb_dev_capa_ext_desc_t capa_ext; + usb_dev_bos_desc_t bos; + usb_dev_capa_ext_desc_t capa_ext; } usb_dev_lpm_desc_t; /** * \brief Standard USB Interface Association Descriptor structure */ typedef struct { - uint8_t bLength; //!< size of this descriptor in bytes - uint8_t bDescriptorType; //!< INTERFACE descriptor type - uint8_t bFirstInterface; //!< Number of interface - uint8_t bInterfaceCount; //!< value to select alternate setting - uint8_t bFunctionClass; //!< Class code assigned by the USB - uint8_t bFunctionSubClass;//!< Sub-class code assigned by the USB - uint8_t bFunctionProtocol;//!< Protocol code assigned by the USB - uint8_t iFunction; //!< Index of string descriptor + uint8_t bLength; //!< size of this descriptor in bytes + uint8_t bDescriptorType; //!< INTERFACE descriptor type + uint8_t bFirstInterface; //!< Number of interface + uint8_t bInterfaceCount; //!< value to select alternate setting + uint8_t bFunctionClass; //!< Class code assigned by the USB + uint8_t bFunctionSubClass;//!< Sub-class code assigned by the USB + uint8_t bFunctionProtocol;//!< Protocol code assigned by the USB + uint8_t iFunction; //!< Index of string descriptor } usb_association_desc_t; @@ -416,14 +416,14 @@ typedef struct { * \brief Standard USB configuration descriptor structure */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; - le16_t wTotalLength; - uint8_t bNumInterfaces; - uint8_t bConfigurationValue; - uint8_t iConfiguration; - uint8_t bmAttributes; - uint8_t bMaxPower; + uint8_t bLength; + uint8_t bDescriptorType; + le16_t wTotalLength; + uint8_t bNumInterfaces; + uint8_t bConfigurationValue; + uint8_t iConfiguration; + uint8_t bmAttributes; + uint8_t bMaxPower; } usb_conf_desc_t; @@ -438,41 +438,41 @@ typedef struct { * \brief Standard USB association descriptor structure */ typedef struct { - uint8_t bLength; //!< Size of this descriptor in bytes - uint8_t bDescriptorType; //!< Interface descriptor type - uint8_t bFirstInterface; //!< Number of interface - uint8_t bInterfaceCount; //!< value to select alternate setting - uint8_t bFunctionClass; //!< Class code assigned by the USB - uint8_t bFunctionSubClass; //!< Sub-class code assigned by the USB - uint8_t bFunctionProtocol; //!< Protocol code assigned by the USB - uint8_t iFunction; //!< Index of string descriptor + uint8_t bLength; //!< Size of this descriptor in bytes + uint8_t bDescriptorType; //!< Interface descriptor type + uint8_t bFirstInterface; //!< Number of interface + uint8_t bInterfaceCount; //!< value to select alternate setting + uint8_t bFunctionClass; //!< Class code assigned by the USB + uint8_t bFunctionSubClass; //!< Sub-class code assigned by the USB + uint8_t bFunctionProtocol; //!< Protocol code assigned by the USB + uint8_t iFunction; //!< Index of string descriptor } usb_iad_desc_t; /** * \brief Standard USB interface descriptor structure */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bInterfaceNumber; - uint8_t bAlternateSetting; - uint8_t bNumEndpoints; - uint8_t bInterfaceClass; - uint8_t bInterfaceSubClass; - uint8_t bInterfaceProtocol; - uint8_t iInterface; + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bInterfaceNumber; + uint8_t bAlternateSetting; + uint8_t bNumEndpoints; + uint8_t bInterfaceClass; + uint8_t bInterfaceSubClass; + uint8_t bInterfaceProtocol; + uint8_t iInterface; } usb_iface_desc_t; /** * \brief Standard USB endpoint descriptor structure */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bEndpointAddress; - uint8_t bmAttributes; - le16_t wMaxPacketSize; - uint8_t bInterval; + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bEndpointAddress; + uint8_t bmAttributes; + le16_t wMaxPacketSize; + uint8_t bInterval; } usb_ep_desc_t; @@ -480,13 +480,13 @@ typedef struct { * \brief A standard USB string descriptor structure */ typedef struct { - uint8_t bLength; - uint8_t bDescriptorType; + uint8_t bLength; + uint8_t bDescriptorType; } usb_str_desc_t; typedef struct { - usb_str_desc_t desc; - le16_t string[1]; + usb_str_desc_t desc; + le16_t string[1]; } usb_str_lgid_desc_t; COMPILER_PACK_RESET() diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h index d594db52e33b..9b82afc6242b 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h @@ -58,42 +58,42 @@ * \name Possible values of class */ //@{ -#define CDC_CLASS_DEVICE 0x02 //!< USB Communication Device Class -#define CDC_CLASS_COMM 0x02 //!< CDC Communication Class Interface -#define CDC_CLASS_DATA 0x0A //!< CDC Data Class Interface +#define CDC_CLASS_DEVICE 0x02 //!< USB Communication Device Class +#define CDC_CLASS_COMM 0x02 //!< CDC Communication Class Interface +#define CDC_CLASS_DATA 0x0A //!< CDC Data Class Interface #define CDC_CLASS_MULTI 0xEF //!< CDC Multi-interface Function //@} //! \name USB CDC Subclass IDs //@{ -#define CDC_SUBCLASS_DLCM 0x01 //!< Direct Line Control Model -#define CDC_SUBCLASS_ACM 0x02 //!< Abstract Control Model -#define CDC_SUBCLASS_TCM 0x03 //!< Telephone Control Model -#define CDC_SUBCLASS_MCCM 0x04 //!< Multi-Channel Control Model -#define CDC_SUBCLASS_CCM 0x05 //!< CAPI Control Model -#define CDC_SUBCLASS_ETH 0x06 //!< Ethernet Networking Control Model -#define CDC_SUBCLASS_ATM 0x07 //!< ATM Networking Control Model +#define CDC_SUBCLASS_DLCM 0x01 //!< Direct Line Control Model +#define CDC_SUBCLASS_ACM 0x02 //!< Abstract Control Model +#define CDC_SUBCLASS_TCM 0x03 //!< Telephone Control Model +#define CDC_SUBCLASS_MCCM 0x04 //!< Multi-Channel Control Model +#define CDC_SUBCLASS_CCM 0x05 //!< CAPI Control Model +#define CDC_SUBCLASS_ETH 0x06 //!< Ethernet Networking Control Model +#define CDC_SUBCLASS_ATM 0x07 //!< ATM Networking Control Model //@} //! \name USB CDC Communication Interface Protocol IDs //@{ -#define CDC_PROTOCOL_V25TER 0x01 //!< Common AT commands +#define CDC_PROTOCOL_V25TER 0x01 //!< Common AT commands //@} //! \name USB CDC Data Interface Protocol IDs //@{ -#define CDC_PROTOCOL_I430 0x30 //!< ISDN BRI -#define CDC_PROTOCOL_HDLC 0x31 //!< HDLC -#define CDC_PROTOCOL_TRANS 0x32 //!< Transparent -#define CDC_PROTOCOL_Q921M 0x50 //!< Q.921 management protocol -#define CDC_PROTOCOL_Q921 0x51 //!< Q.931 [sic] Data link protocol -#define CDC_PROTOCOL_Q921TM 0x52 //!< Q.921 TEI-multiplexor -#define CDC_PROTOCOL_V42BIS 0x90 //!< Data compression procedures -#define CDC_PROTOCOL_Q931 0x91 //!< Euro-ISDN protocol control -#define CDC_PROTOCOL_V120 0x92 //!< V.24 rate adaption to ISDN -#define CDC_PROTOCOL_CAPI20 0x93 //!< CAPI Commands -#define CDC_PROTOCOL_HOST 0xFD //!< Host based driver +#define CDC_PROTOCOL_I430 0x30 //!< ISDN BRI +#define CDC_PROTOCOL_HDLC 0x31 //!< HDLC +#define CDC_PROTOCOL_TRANS 0x32 //!< Transparent +#define CDC_PROTOCOL_Q921M 0x50 //!< Q.921 management protocol +#define CDC_PROTOCOL_Q921 0x51 //!< Q.931 [sic] Data link protocol +#define CDC_PROTOCOL_Q921TM 0x52 //!< Q.921 TEI-multiplexor +#define CDC_PROTOCOL_V42BIS 0x90 //!< Data compression procedures +#define CDC_PROTOCOL_Q931 0x91 //!< Euro-ISDN protocol control +#define CDC_PROTOCOL_V120 0x92 //!< V.24 rate adaption to ISDN +#define CDC_PROTOCOL_CAPI20 0x93 //!< CAPI Commands +#define CDC_PROTOCOL_HOST 0xFD //!< Host based driver /** * \brief Describes the Protocol Unit Functional Descriptors [sic] * on Communication Class Interface @@ -103,16 +103,16 @@ //! \name USB CDC Functional Descriptor Types //@{ -#define CDC_CS_INTERFACE 0x24 //!< Interface Functional Descriptor -#define CDC_CS_ENDPOINT 0x25 //!< Endpoint Functional Descriptor +#define CDC_CS_INTERFACE 0x24 //!< Interface Functional Descriptor +#define CDC_CS_ENDPOINT 0x25 //!< Endpoint Functional Descriptor //@} //! \name USB CDC Functional Descriptor Subtypes //@{ -#define CDC_SCS_HEADER 0x00 //!< Header Functional Descriptor -#define CDC_SCS_CALL_MGMT 0x01 //!< Call Management -#define CDC_SCS_ACM 0x02 //!< Abstract Control Management -#define CDC_SCS_UNION 0x06 //!< Union Functional Descriptor +#define CDC_SCS_HEADER 0x00 //!< Header Functional Descriptor +#define CDC_SCS_CALL_MGMT 0x01 //!< Call Management +#define CDC_SCS_ACM 0x02 //!< Abstract Control Management +#define CDC_SCS_UNION 0x06 //!< Union Functional Descriptor //@} //! \name USB CDC Request IDs @@ -171,36 +171,36 @@ COMPILER_PACK_SET(1) //! CDC Header Functional Descriptor typedef struct { - uint8_t bFunctionLength; - uint8_t bDescriptorType; - uint8_t bDescriptorSubtype; - le16_t bcdCDC; + uint8_t bFunctionLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubtype; + le16_t bcdCDC; } usb_cdc_hdr_desc_t; //! CDC Call Management Functional Descriptor typedef struct { - uint8_t bFunctionLength; - uint8_t bDescriptorType; - uint8_t bDescriptorSubtype; - uint8_t bmCapabilities; - uint8_t bDataInterface; + uint8_t bFunctionLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubtype; + uint8_t bmCapabilities; + uint8_t bDataInterface; } usb_cdc_call_mgmt_desc_t; //! CDC ACM Functional Descriptor typedef struct { - uint8_t bFunctionLength; - uint8_t bDescriptorType; - uint8_t bDescriptorSubtype; - uint8_t bmCapabilities; + uint8_t bFunctionLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubtype; + uint8_t bmCapabilities; } usb_cdc_acm_desc_t; //! CDC Union Functional Descriptor typedef struct { - uint8_t bFunctionLength; - uint8_t bDescriptorType; - uint8_t bDescriptorSubtype; - uint8_t bMasterInterface; - uint8_t bSlaveInterface0; + uint8_t bFunctionLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubtype; + uint8_t bMasterInterface; + uint8_t bSlaveInterface0; } usb_cdc_union_desc_t; @@ -235,24 +235,24 @@ typedef struct { //@{ //! Line Coding structure typedef struct { - le32_t dwDTERate; - uint8_t bCharFormat; - uint8_t bParityType; - uint8_t bDataBits; + le32_t dwDTERate; + uint8_t bCharFormat; + uint8_t bParityType; + uint8_t bDataBits; } usb_cdc_line_coding_t; //! Possible values of bCharFormat enum cdc_char_format { - CDC_STOP_BITS_1 = 0, //!< 1 stop bit - CDC_STOP_BITS_1_5 = 1, //!< 1.5 stop bits - CDC_STOP_BITS_2 = 2, //!< 2 stop bits + CDC_STOP_BITS_1 = 0, //!< 1 stop bit + CDC_STOP_BITS_1_5 = 1, //!< 1.5 stop bits + CDC_STOP_BITS_2 = 2, //!< 2 stop bits }; //! Possible values of bParityType enum cdc_parity { - CDC_PAR_NONE = 0, //!< No parity - CDC_PAR_ODD = 1, //!< Odd parity - CDC_PAR_EVEN = 2, //!< Even parity - CDC_PAR_MARK = 3, //!< Parity forced to 0 (space) - CDC_PAR_SPACE = 4, //!< Parity forced to 1 (mark) + CDC_PAR_NONE = 0, //!< No parity + CDC_PAR_ODD = 1, //!< Odd parity + CDC_PAR_EVEN = 2, //!< Even parity + CDC_PAR_MARK = 3, //!< Parity forced to 0 (space) + CDC_PAR_SPACE = 4, //!< Parity forced to 1 (mark) }; //@} @@ -262,7 +262,7 @@ enum cdc_parity { //! Control signal structure typedef struct { - uint16_t value; + uint16_t value; } usb_cdc_control_signal_t; //! \name Possible values in usb_cdc_control_signal_t @@ -283,11 +283,11 @@ typedef struct { //@{ typedef struct { - uint8_t bmRequestType; - uint8_t bNotification; - le16_t wValue; - le16_t wIndex; - le16_t wLength; + uint8_t bmRequestType; + uint8_t bNotification; + le16_t wValue; + le16_t wIndex; + le16_t wLength; } usb_cdc_notify_msg_t; //! \name USB CDC serial state @@ -295,8 +295,8 @@ typedef struct { //! Hardware handshake support (cdc spec 1.1 chapter 6.3.5) typedef struct { - usb_cdc_notify_msg_t header; - le16_t value; + usb_cdc_notify_msg_t header; + le16_t value; } usb_cdc_notify_serial_state_t; //! \name Possible values in usb_cdc_notify_serial_state_t diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h index e1e59237d823..cc30a94e4fc8 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h @@ -59,7 +59,7 @@ * \name Possible Class value */ //@{ -#define MSC_CLASS 0x08 +#define MSC_CLASS 0x08 //@} /** @@ -71,12 +71,12 @@ * operating systems like Windows XP. */ //@{ -#define MSC_SUBCLASS_RBC 0x01 //!< Reduced Block Commands -#define MSC_SUBCLASS_ATAPI 0x02 //!< CD/DVD devices -#define MSC_SUBCLASS_QIC_157 0x03 //!< Tape devices -#define MSC_SUBCLASS_UFI 0x04 //!< Floppy disk drives -#define MSC_SUBCLASS_SFF_8070I 0x05 //!< Floppy disk drives -#define MSC_SUBCLASS_TRANSPARENT 0x06 //!< Determined by INQUIRY +#define MSC_SUBCLASS_RBC 0x01 //!< Reduced Block Commands +#define MSC_SUBCLASS_ATAPI 0x02 //!< CD/DVD devices +#define MSC_SUBCLASS_QIC_157 0x03 //!< Tape devices +#define MSC_SUBCLASS_UFI 0x04 //!< Floppy disk drives +#define MSC_SUBCLASS_SFF_8070I 0x05 //!< Floppy disk drives +#define MSC_SUBCLASS_TRANSPARENT 0x06 //!< Determined by INQUIRY //@} /** @@ -84,9 +84,9 @@ * \note Only the BULK protocol should be used in new designs. */ //@{ -#define MSC_PROTOCOL_CBI 0x00 //!< Command/Bulk/Interrupt -#define MSC_PROTOCOL_CBI_ALT 0x01 //!< W/o command completion -#define MSC_PROTOCOL_BULK 0x50 //!< Bulk-only +#define MSC_PROTOCOL_CBI 0x00 //!< Command/Bulk/Interrupt +#define MSC_PROTOCOL_CBI_ALT 0x01 //!< W/o command completion +#define MSC_PROTOCOL_BULK 0x50 //!< Bulk-only //@} @@ -94,8 +94,8 @@ * \brief MSC USB requests (bRequest) */ enum usb_reqid_msc { - USB_REQ_MSC_BULK_RESET = 0xFF, //!< Mass Storage Reset - USB_REQ_MSC_GET_MAX_LUN = 0xFE //!< Get Max LUN + USB_REQ_MSC_BULK_RESET = 0xFF, //!< Mass Storage Reset + USB_REQ_MSC_GET_MAX_LUN = 0xFE //!< Get Max LUN }; @@ -106,20 +106,20 @@ COMPILER_PACK_SET(1) */ //@{ struct usb_msc_cbw { - le32_t dCBWSignature; //!< Must contain 'USBC' - le32_t dCBWTag; //!< Unique command ID - le32_t dCBWDataTransferLength; //!< Number of bytes to transfer - uint8_t bmCBWFlags; //!< Direction in bit 7 - uint8_t bCBWLUN; //!< Logical Unit Number - uint8_t bCBWCBLength; //!< Number of valid CDB bytes - uint8_t CDB[16]; //!< SCSI Command Descriptor Block + le32_t dCBWSignature; //!< Must contain 'USBC' + le32_t dCBWTag; //!< Unique command ID + le32_t dCBWDataTransferLength; //!< Number of bytes to transfer + uint8_t bmCBWFlags; //!< Direction in bit 7 + uint8_t bCBWLUN; //!< Logical Unit Number + uint8_t bCBWCBLength; //!< Number of valid CDB bytes + uint8_t CDB[16]; //!< SCSI Command Descriptor Block }; -#define USB_CBW_SIGNATURE 0x55534243 //!< dCBWSignature value -#define USB_CBW_DIRECTION_IN (1<<7) //!< Data from device to host -#define USB_CBW_DIRECTION_OUT (0<<7) //!< Data from host to device -#define USB_CBW_LUN_MASK 0x0F //!< Valid bits in bCBWLUN -#define USB_CBW_LEN_MASK 0x1F //!< Valid bits in bCBWCBLength +#define USB_CBW_SIGNATURE 0x55534243 //!< dCBWSignature value +#define USB_CBW_DIRECTION_IN (1<<7) //!< Data from device to host +#define USB_CBW_DIRECTION_OUT (0<<7) //!< Data from host to device +#define USB_CBW_LUN_MASK 0x0F //!< Valid bits in bCBWLUN +#define USB_CBW_LEN_MASK 0x1F //!< Valid bits in bCBWCBLength //@} @@ -128,16 +128,16 @@ struct usb_msc_cbw { */ //@{ struct usb_msc_csw { - le32_t dCSWSignature; //!< Must contain 'USBS' - le32_t dCSWTag; //!< Same as dCBWTag - le32_t dCSWDataResidue; //!< Number of bytes not transferred - uint8_t bCSWStatus; //!< Status code + le32_t dCSWSignature; //!< Must contain 'USBS' + le32_t dCSWTag; //!< Same as dCBWTag + le32_t dCSWDataResidue; //!< Number of bytes not transferred + uint8_t bCSWStatus; //!< Status code }; -#define USB_CSW_SIGNATURE 0x55534253 //!< dCSWSignature value -#define USB_CSW_STATUS_PASS 0x00 //!< Command Passed -#define USB_CSW_STATUS_FAIL 0x01 //!< Command Failed -#define USB_CSW_STATUS_PE 0x02 //!< Phase Error +#define USB_CSW_SIGNATURE 0x55534253 //!< dCSWSignature value +#define USB_CSW_STATUS_PASS 0x00 //!< Command Passed +#define USB_CSW_STATUS_FAIL 0x01 //!< Command Failed +#define USB_CSW_STATUS_PE 0x02 //!< Phase Error //@} COMPILER_PACK_RESET() diff --git a/buildroot/share/PlatformIO/variants/marlin_maple_CHITU_F103/board/board.h b/buildroot/share/PlatformIO/variants/marlin_maple_CHITU_F103/board/board.h index 80261d30274d..5664a1ad2c68 100644 --- a/buildroot/share/PlatformIO/variants/marlin_maple_CHITU_F103/board/board.h +++ b/buildroot/share/PlatformIO/variants/marlin_maple_CHITU_F103/board/board.h @@ -100,12 +100,12 @@ /* * SDIO Pins */ -#define BOARD_SDIO_D0 PC8 -#define BOARD_SDIO_D1 PC9 -#define BOARD_SDIO_D2 PC10 -#define BOARD_SDIO_D3 PC11 -#define BOARD_SDIO_CLK PC12 -#define BOARD_SDIO_CMD PD2 +#define BOARD_SDIO_D0 PC8 +#define BOARD_SDIO_D1 PC9 +#define BOARD_SDIO_D2 PC10 +#define BOARD_SDIO_D3 PC11 +#define BOARD_SDIO_CLK PC12 +#define BOARD_SDIO_CMD PD2 /* Pin aliases: these give the GPIO port/bit for each pin as an * enum. These are optional, but recommended. They make it easier to diff --git a/buildroot/share/PlatformIO/variants/marlin_maple_MEEB_3DP/board/board.h b/buildroot/share/PlatformIO/variants/marlin_maple_MEEB_3DP/board/board.h index 6ffa2447460d..24458fe79ab2 100644 --- a/buildroot/share/PlatformIO/variants/marlin_maple_MEEB_3DP/board/board.h +++ b/buildroot/share/PlatformIO/variants/marlin_maple_MEEB_3DP/board/board.h @@ -100,12 +100,12 @@ /* * SDIO Pins */ -#define BOARD_SDIO_D0 PC8 -#define BOARD_SDIO_D1 PC9 -#define BOARD_SDIO_D2 PC10 -#define BOARD_SDIO_D3 PC11 -#define BOARD_SDIO_CLK PC12 -#define BOARD_SDIO_CMD PD2 +#define BOARD_SDIO_D0 PC8 +#define BOARD_SDIO_D1 PC9 +#define BOARD_SDIO_D2 PC10 +#define BOARD_SDIO_D3 PC11 +#define BOARD_SDIO_CLK PC12 +#define BOARD_SDIO_CMD PD2 /* Pin aliases: these give the GPIO port/bit for each pin as an * enum. These are optional, but recommended. They make it easier to