You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I moved from some older bugfix-2.0.x to the current bugfix-2.1.x branch.
I found out that the printer does not respect Z_MAX endstop which was used during Z_HOMING process to ensure that (because of a need to provide clearance for Z_PROBE) the bed will not be lowered beyond the physical machine limits.
Bug Timeline
No information since I've stopped to use newer versions of bugfix-2.0.x and jumped in to the recent bugfix-2.1.x
Expected behavior
When hitting Z_MAX endstop during homing, the bed should stop moving down, but the process of homing should not be interrupted.
Actual behavior
The Z_MAX endstop is not triggered.
The M119 command does not list Z_MAX endstop at all.
Steps to Reproduce
Initiate Z_HOMING
press the Z_MAX endstop while the bed moves down
Version of Marlin Firmware
bugfix-2.1.x
Printer model
TwoTrees Sapphire Pro
Electronics
MKS_ROBIN_NANO_1.2
Add-ons
BL_TOUCH, Z_MAX endstop
Bed Leveling
ABL Bilinear mesh
Your Slicer
Prusa Slicer
Host Software
SD Card (headless)
Don't forget to include
A ZIP file containing your Configuration.h and Configuration_adv.h.
This issue has had no activity in the last 60 days. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed within 10 days.
Did you test the latest
bugfix-2.1.x
code?Yes, and the problem still exists.
Bug Description
I moved from some older bugfix-2.0.x to the current bugfix-2.1.x branch.
I found out that the printer does not respect Z_MAX endstop which was used during Z_HOMING process to ensure that (because of a need to provide clearance for Z_PROBE) the bed will not be lowered beyond the physical machine limits.
Bug Timeline
No information since I've stopped to use newer versions of bugfix-2.0.x and jumped in to the recent bugfix-2.1.x
Expected behavior
When hitting Z_MAX endstop during homing, the bed should stop moving down, but the process of homing should not be interrupted.
Actual behavior
The Z_MAX endstop is not triggered.
The M119 command does not list Z_MAX endstop at all.
Steps to Reproduce
Version of Marlin Firmware
bugfix-2.1.x
Printer model
TwoTrees Sapphire Pro
Electronics
MKS_ROBIN_NANO_1.2
Add-ons
BL_TOUCH, Z_MAX endstop
Bed Leveling
ABL Bilinear mesh
Your Slicer
Prusa Slicer
Host Software
SD Card (headless)
Don't forget to include
Configuration.h
andConfiguration_adv.h
.Additional information & file uploads
config.zip
M119 output:
17:29:47.540 : Reporting endstop status
17:29:47.542 : x_min: open
17:29:47.542 : y_max: open
17:29:47.545 : z_min: TRIGGERED
17:29:47.545 : filament: TRIGGERED
The text was updated successfully, but these errors were encountered: