diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7fb3482afeb9..dec1a81bee7e 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -34,7 +34,6 @@
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
- *
*/
#define CONFIGURATION_H_VERSION 020007
@@ -855,7 +854,6 @@
* - For simple switches connect...
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
- *
*/
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@@ -1567,7 +1565,6 @@
*
* Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change.
- *
*/
//#define NOZZLE_CLEAN_FEATURE
@@ -1720,7 +1717,6 @@
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
- *
*/
//#define SDSUPPORT
@@ -2343,7 +2339,6 @@
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.
- *
*/
//#define RGB_LED
//#define RGBW_LED
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 7d2d78e9dd4d..a7b6245c2b33 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
- *
*/
#define CONFIGURATION_ADV_H_VERSION 020007
@@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 |
- *
*/
#ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0
@@ -1954,7 +1952,6 @@
* Be sure to turn off auto-retract during filament change.
*
* Note that M207 / M208 / M209 settings are saved to EEPROM.
- *
*/
//#define FWRETRACT
#if ENABLED(FWRETRACT)
diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h
index 41f1acd32f68..b606d0c231b4 100644
--- a/Marlin/src/HAL/AVR/HAL.h
+++ b/Marlin/src/HAL/AVR/HAL.h
@@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
+ *
*/
#pragma once
diff --git a/Marlin/src/HAL/AVR/Servo.cpp b/Marlin/src/HAL/AVR/Servo.cpp
index 66ed993c6f18..526352b77339 100644
--- a/Marlin/src/HAL/AVR/Servo.cpp
+++ b/Marlin/src/HAL/AVR/Servo.cpp
@@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin.
- *
*/
#ifdef __AVR__
diff --git a/Marlin/src/HAL/AVR/timers.h b/Marlin/src/HAL/AVR/timers.h
index 6c40d3220924..82eb8b14b161 100644
--- a/Marlin/src/HAL/AVR/timers.h
+++ b/Marlin/src/HAL/AVR/timers.h
@@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
+ *
*/
#pragma once
diff --git a/Marlin/src/HAL/DUE/HAL_SPI.cpp b/Marlin/src/HAL/DUE/HAL_SPI.cpp
index 97d69f0d726b..54ae8eceb10c 100644
--- a/Marlin/src/HAL/DUE/HAL_SPI.cpp
+++ b/Marlin/src/HAL/DUE/HAL_SPI.cpp
@@ -759,7 +759,6 @@
*
* All of the above can be avoided by defining FORCE_SOFT_SPI to force the
* display to use software SPI.
- *
*/
void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified)
diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
index 3e7f6199973d..be4b49c0f992 100644
--- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
+++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
@@ -52,7 +52,6 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
*/
#ifdef __SAM3X8E__
diff --git a/Marlin/src/HAL/DUE/eeprom_flash.cpp b/Marlin/src/HAL/DUE/eeprom_flash.cpp
index d98f06039f51..67f1f9e40f46 100644
--- a/Marlin/src/HAL/DUE/eeprom_flash.cpp
+++ b/Marlin/src/HAL/DUE/eeprom_flash.cpp
@@ -53,7 +53,6 @@
* per page. We can't emulate EE endurance with FLASH for all
* bytes, but we can emulate endurance for a given percent of
* bytes.
- *
*/
//#define EE_EMU_DEBUG
diff --git a/Marlin/src/HAL/DUE/pinsDebug.h b/Marlin/src/HAL/DUE/pinsDebug.h
index 28687ff267c4..a99ca8ecce90 100644
--- a/Marlin/src/HAL/DUE/pinsDebug.h
+++ b/Marlin/src/HAL/DUE/pinsDebug.h
@@ -179,5 +179,4 @@ void pwm_details(int32_t pin) {
* ----------------+--------
* ID | PB11
* VBOF | PB10
- *
*/
diff --git a/Marlin/src/HAL/ESP32/HAL.h b/Marlin/src/HAL/ESP32/HAL.h
index 5eb84fdc3021..f6fa46dd93a7 100644
--- a/Marlin/src/HAL/ESP32/HAL.h
+++ b/Marlin/src/HAL/ESP32/HAL.h
@@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
+ *
*/
#pragma once
diff --git a/Marlin/src/HAL/ESP32/ota.h b/Marlin/src/HAL/ESP32/ota.h
index 7f9b237aa6e1..546ace82dbb8 100644
--- a/Marlin/src/HAL/ESP32/ota.h
+++ b/Marlin/src/HAL/ESP32/ota.h
@@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
+ *
*/
#pragma once
diff --git a/Marlin/src/HAL/LINUX/include/serial.h b/Marlin/src/HAL/LINUX/include/serial.h
index 94e0c758ee12..e91624938978 100644
--- a/Marlin/src/HAL/LINUX/include/serial.h
+++ b/Marlin/src/HAL/LINUX/include/serial.h
@@ -33,7 +33,6 @@
* Generic RingBuffer
* T type of the buffer array
* S size of the buffer (must be power of 2)
- *
*/
template class RingBuffer {
public:
diff --git a/Marlin/src/HAL/LINUX/servo_private.h b/Marlin/src/HAL/LINUX/servo_private.h
index 122cfef3ea21..bcc8d2037f90 100644
--- a/Marlin/src/HAL/LINUX/servo_private.h
+++ b/Marlin/src/HAL/LINUX/servo_private.h
@@ -45,7 +45,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
*
* The only modification was to update/delete macros to match the LPC176x.
- *
*/
#include
diff --git a/Marlin/src/HAL/LPC1768/Servo.h b/Marlin/src/HAL/LPC1768/Servo.h
index e953cb920475..eb12fd20f4d8 100644
--- a/Marlin/src/HAL/LPC1768/Servo.h
+++ b/Marlin/src/HAL/LPC1768/Servo.h
@@ -46,7 +46,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
*
* The only modification was to update/delete macros to match the LPC176x.
- *
*/
#include
diff --git a/Marlin/src/HAL/LPC1768/timers.h b/Marlin/src/HAL/LPC1768/timers.h
index 23dc20e2eb4e..e6744fb005bf 100644
--- a/Marlin/src/HAL/LPC1768/timers.h
+++ b/Marlin/src/HAL/LPC1768/timers.h
@@ -21,7 +21,6 @@
#pragma once
/**
- *
* HAL For LPC1768
*/
diff --git a/Marlin/src/HAL/SAMD51/QSPIFlash.h b/Marlin/src/HAL/SAMD51/QSPIFlash.h
index b6f22769ff60..db4abec91caf 100644
--- a/Marlin/src/HAL/SAMD51/QSPIFlash.h
+++ b/Marlin/src/HAL/SAMD51/QSPIFlash.h
@@ -24,7 +24,6 @@
* THE SOFTWARE.
*
* Derived from Adafruit_SPIFlash class with no SdFat references
- *
*/
#pragma once
diff --git a/Marlin/src/HAL/SAMD51/pinsDebug.h b/Marlin/src/HAL/SAMD51/pinsDebug.h
index c28937d6c6d6..81376db79add 100644
--- a/Marlin/src/HAL/SAMD51/pinsDebug.h
+++ b/Marlin/src/HAL/SAMD51/pinsDebug.h
@@ -150,5 +150,4 @@ void pwm_details(int32_t pin) {
* 93 | PA10 | QSPI: IO2
* 94 | PA11 | QSPI: IO3
* 95 | PB31 | SD: DETECT
- *
*/
diff --git a/Marlin/src/HAL/STM32F1/onboard_sd.cpp b/Marlin/src/HAL/STM32F1/onboard_sd.cpp
index 0440db9438a4..da25271734ba 100644
--- a/Marlin/src/HAL/STM32F1/onboard_sd.cpp
+++ b/Marlin/src/HAL/STM32F1/onboard_sd.cpp
@@ -9,7 +9,6 @@
* No restriction on use. You can use, modify and redistribute it for
* personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
* Redistributions of source code must retain the above copyright notice.
- *
*/
#include "../../inc/MarlinConfig.h"
diff --git a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp
index 4d116f440b8e..df3d40f159a7 100644
--- a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp
+++ b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp
@@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
- *
*/
#if defined(STM32GENERIC) && defined(STM32F7)
@@ -662,7 +661,6 @@ boolean TMC26XStepper::isEnabled() { return !!(chopper_config_register & T_OFF_P
/**
* reads a value from the TMC26X status register. The value is not obtained directly but can then
* be read by the various status routines.
- *
*/
void TMC26XStepper::readStatus(char read_value) {
uint32_t old_driver_configuration_register_value = driver_configuration_register_value;
diff --git a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h
index f1d0133a3b14..208c3bc7e062 100644
--- a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h
+++ b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h
@@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
- *
*/
#pragma once
diff --git a/Marlin/src/HAL/TEENSY35_36/timers.h b/Marlin/src/HAL/TEENSY35_36/timers.h
index 68060d0e1c06..ad6629f40df6 100644
--- a/Marlin/src/HAL/TEENSY35_36/timers.h
+++ b/Marlin/src/HAL/TEENSY35_36/timers.h
@@ -16,6 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
+ *
*/
#pragma once
diff --git a/Marlin/src/HAL/TEENSY40_41/timers.h b/Marlin/src/HAL/TEENSY40_41/timers.h
index 9c4bf8c274cc..81891c366be6 100644
--- a/Marlin/src/HAL/TEENSY40_41/timers.h
+++ b/Marlin/src/HAL/TEENSY40_41/timers.h
@@ -16,6 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
+ *
*/
#pragma once
diff --git a/Marlin/src/HAL/shared/servo.cpp b/Marlin/src/HAL/shared/servo.cpp
index d69cf2fe2c8f..cfec6f301737 100644
--- a/Marlin/src/HAL/shared/servo.cpp
+++ b/Marlin/src/HAL/shared/servo.cpp
@@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin.
- *
*/
#include "../../inc/MarlinConfig.h"
diff --git a/Marlin/src/HAL/shared/servo.h b/Marlin/src/HAL/shared/servo.h
index ccaf1f0255df..6d850da851d2 100644
--- a/Marlin/src/HAL/shared/servo.h
+++ b/Marlin/src/HAL/shared/servo.h
@@ -41,7 +41,6 @@
*/
/**
- *
* A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
* The servos are pulsed in the background using the value most recently written using the write() method
*
diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h
index ed97e52f891d..a644ab2fc8be 100644
--- a/Marlin/src/core/language.h
+++ b/Marlin/src/core/language.h
@@ -348,7 +348,6 @@
* However, internal to Marlin E0/T0 is the first tool, and
* most board silkscreens say "E0." Zero-based labels will
* make these indexes consistent but this defies expectation.
- *
*/
#if ENABLED(NUMBER_TOOLS_FROM_0)
#define LCD_FIRST_TOOL 0
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
index 63559e0bb88e..010b5951be5f 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
@@ -236,9 +236,7 @@
}
/**
- *
* Generic case of a line crossing both X and Y Mesh lines.
- *
*/
xy_int8_t cnt = (istart - iend).ABS();
diff --git a/Marlin/src/feature/encoder_i2c.cpp b/Marlin/src/feature/encoder_i2c.cpp
index f67d50a6e038..8a3e959e0702 100644
--- a/Marlin/src/feature/encoder_i2c.cpp
+++ b/Marlin/src/feature/encoder_i2c.cpp
@@ -816,7 +816,6 @@ int8_t I2CPositionEncodersMgr::parse() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
- *
*/
void I2CPositionEncodersMgr::M860() {
if (parse()) return;
@@ -846,7 +845,6 @@ void I2CPositionEncodersMgr::M860() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
- *
*/
void I2CPositionEncodersMgr::M861() {
if (parse()) return;
@@ -875,7 +873,6 @@ void I2CPositionEncodersMgr::M861() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
- *
*/
void I2CPositionEncodersMgr::M862() {
if (parse()) return;
@@ -905,7 +902,6 @@ void I2CPositionEncodersMgr::M862() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
- *
*/
void I2CPositionEncodersMgr::M863() {
if (parse()) return;
diff --git a/Marlin/src/feature/mmu2/mmu2.cpp b/Marlin/src/feature/mmu2/mmu2.cpp
index 31fa529d56b1..37a2404c332b 100644
--- a/Marlin/src/feature/mmu2/mmu2.cpp
+++ b/Marlin/src/feature/mmu2/mmu2.cpp
@@ -710,13 +710,11 @@ void MMU2::tool_change(const uint8_t index) {
}
/**
- *
* Handle special T?/Tx/Tc commands
*
* T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
* Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
* Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
- *
*/
void MMU2::tool_change(const char* special) {
if (!enabled) return;
@@ -922,9 +920,7 @@ void MMU2::filament_runout() {
}
/**
- *
* Switch material and load to nozzle
- *
*/
bool MMU2::load_filament_to_nozzle(const uint8_t index) {
diff --git a/Marlin/src/feature/twibus.h b/Marlin/src/feature/twibus.h
index 8bc8eb4e74d7..82aa9aa16a2a 100644
--- a/Marlin/src/feature/twibus.h
+++ b/Marlin/src/feature/twibus.h
@@ -48,7 +48,6 @@ typedef void (*twiRequestFunc_t)();
* For more information see
* - https://marlinfw.org/docs/gcode/M260.html
* - https://marlinfw.org/docs/gcode/M261.html
- *
*/
class TWIBus {
private:
diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp
index 9bb1ebe23819..e9b6e0e3a6db 100644
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -160,7 +160,6 @@
* E By default G29 will engage the Z probe, test the bed, then disengage.
* Include "E" to engage/disengage the Z probe for each sample.
* There's no extra effect if you have a fixed Z probe.
- *
*/
G29_TYPE GcodeSuite::G29() {
diff --git a/Marlin/src/gcode/bedlevel/mbl/G29.cpp b/Marlin/src/gcode/bedlevel/mbl/G29.cpp
index 68ac459ebb43..5da99386adc5 100644
--- a/Marlin/src/gcode/bedlevel/mbl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/mbl/G29.cpp
@@ -57,7 +57,6 @@ inline void echo_not_entered(const char c) { SERIAL_CHAR(c); SERIAL_ECHOLNPGM("
* S3 In Jn Zn.nn Manually modify a single point
* S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed.
* S5 Reset and disable mesh
- *
*/
void GcodeSuite::G29() {
diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
index be222a7b1724..7bc40b2127c4 100644
--- a/Marlin/src/gcode/calibrate/G28.cpp
+++ b/Marlin/src/gcode/calibrate/G28.cpp
@@ -192,7 +192,6 @@
* X Home to the X endstop
* Y Home to the Y endstop
* Z Home to the Z endstop
- *
*/
void GcodeSuite::G28() {
DEBUG_SECTION(log_G28, "G28", DEBUGGING(LEVELING));
diff --git a/Marlin/src/gcode/control/M999.cpp b/Marlin/src/gcode/control/M999.cpp
index 53d74322a39a..3bd908cad640 100644
--- a/Marlin/src/gcode/control/M999.cpp
+++ b/Marlin/src/gcode/control/M999.cpp
@@ -34,7 +34,6 @@
*
* Sending "M999 S1" will resume printing without flushing the
* existing command buffer.
- *
*/
void GcodeSuite::M999() {
marlin_state = MF_RUNNING;
diff --git a/Marlin/src/gcode/feature/L6470/M906.cpp b/Marlin/src/gcode/feature/L6470/M906.cpp
index cd7fc3dcb5d1..7bd446a1ab77 100644
--- a/Marlin/src/gcode/feature/L6470/M906.cpp
+++ b/Marlin/src/gcode/feature/L6470/M906.cpp
@@ -33,7 +33,6 @@
#include "../../../core/debug_out.h"
/**
- *
* M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the
* PWMs to the steppers
*
@@ -56,7 +55,6 @@
*
* L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx
* that affects the effective voltage seen by the stepper.
- *
*/
/**
diff --git a/Marlin/src/gcode/feature/L6470/M916-918.cpp b/Marlin/src/gcode/feature/L6470/M916-918.cpp
index 29efc06dd9c7..8165b71e4490 100644
--- a/Marlin/src/gcode/feature/L6470/M916-918.cpp
+++ b/Marlin/src/gcode/feature/L6470/M916-918.cpp
@@ -37,7 +37,6 @@
#include "../../../core/debug_out.h"
/**
- *
* M916: increase KVAL_HOLD until get thermal warning
* NOTE - on L6474 it is TVAL that is used
*
@@ -62,7 +61,6 @@
*
* D - time (in seconds) to run each setting of KVAL_HOLD/TVAL
* optional - defaults to zero (runs each setting once)
- *
*/
/**
@@ -187,7 +185,6 @@ void GcodeSuite::M916() {
}
/**
- *
* M917: Find minimum current thresholds
*
* Decrease OCD current until overcurrent error
@@ -214,7 +211,6 @@ void GcodeSuite::M916() {
*
* K - value for KVAL_HOLD (0 - 255) (ignored for L6474)
* optional - will report current value from driver if not specified
- *
*/
void GcodeSuite::M917() {
@@ -522,7 +518,6 @@ void GcodeSuite::M917() {
}
/**
- *
* M918: increase speed until error or max feedrate achieved (as shown in configuration.h))
*
* J - select which driver(s) to monitor on multi-driver axis
@@ -543,7 +538,6 @@ void GcodeSuite::M917() {
*
* M - value for microsteps (1 - 128) (optional)
* optional - will report current value from driver if not specified
- *
*/
void GcodeSuite::M918() {
diff --git a/Marlin/src/gcode/feature/i2c/M260_M261.cpp b/Marlin/src/gcode/feature/i2c/M260_M261.cpp
index 13c2cd1d10ed..526d9101e1c7 100644
--- a/Marlin/src/gcode/feature/i2c/M260_M261.cpp
+++ b/Marlin/src/gcode/feature/i2c/M260_M261.cpp
@@ -42,7 +42,6 @@
*
* M260 S1 ; Send the buffered data and reset the buffer
* M260 R1 ; Reset the buffer without sending data
- *
*/
void GcodeSuite::M260() {
// Set the target address
diff --git a/Marlin/src/gcode/feature/pause/M603.cpp b/Marlin/src/gcode/feature/pause/M603.cpp
index c40f3ae6e136..9c3b774bd2b2 100644
--- a/Marlin/src/gcode/feature/pause/M603.cpp
+++ b/Marlin/src/gcode/feature/pause/M603.cpp
@@ -39,7 +39,6 @@
* T[toolhead] - Select extruder to configure, active extruder if not specified
* U[distance] - Retract distance for removal, for the specified extruder
* L[distance] - Extrude distance for insertion, for the specified extruder
- *
*/
void GcodeSuite::M603() {
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 085f6b361895..425a85736932 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -289,7 +289,6 @@
* "T" Codes
*
* T0-T3 - Select an extruder (tool) by index: "T F"
- *
*/
#include "../inc/MarlinConfig.h"
diff --git a/Marlin/src/gcode/sd/M32.cpp b/Marlin/src/gcode/sd/M32.cpp
index a6f9fbcd8db1..55ec6ea49741 100644
--- a/Marlin/src/gcode/sd/M32.cpp
+++ b/Marlin/src/gcode/sd/M32.cpp
@@ -38,7 +38,6 @@
* M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO
* M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure
* M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60
- *
*/
void GcodeSuite::M32() {
if (IS_SD_PRINTING()) planner.synchronize();
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index fa65991c2f67..d2c939b9b448 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -512,7 +512,6 @@
* HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options
- *
*/
#if EXTRUDERS == 0
diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
index 211acc86c6d4..806f370db327 100644
--- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
+++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
@@ -11,7 +11,6 @@
* any later version. The code is distributed WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details.
- *
*/
/**
diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h
index 9f0815d099ce..b21724648484 100644
--- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h
+++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h
@@ -11,7 +11,6 @@
* any later version. The code is distributed WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details.
- *
*/
#pragma once
diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
index eb9b5315e575..0f53e45a27b5 100644
--- a/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
+++ b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
@@ -51,7 +51,6 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
*/
#include "../../inc/MarlinConfig.h"
diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.cpp b/Marlin/src/lcd/dwin/e3v2/dwin.cpp
index 2aaf66854ccc..55fcd842de64 100644
--- a/Marlin/src/lcd/dwin/e3v2/dwin.cpp
+++ b/Marlin/src/lcd/dwin/e3v2/dwin.cpp
@@ -1632,7 +1632,6 @@ void update_variable() {
* TODO: New code can follow the pattern of menu_media.cpp
* and rely on Marlin caching for performance. No need to
* cache files here.
- *
*/
#ifndef strcasecmp_P
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp
index 6a635b9ddb94..2c466ffd0449 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp
@@ -42,7 +42,6 @@ constexpr uint32_t flash_eeprom_version = 1;
* 0 16 DATA STORAGE AREA
* 16 1 VERSIONING DATA
* 17 inf MEDIA STORAGE AREA
- *
*/
#define DATA_STORAGE_SIZE_64K
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
index dd4be7a79387..2429e30e79f7 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
@@ -32,7 +32,6 @@
* Selecting an LCD Display
* Version 2.1
* Issue Date: 2017-11-14
- *
*/
#define COMPUTE_REGS_FROM_DATASHEET \
constexpr uint16_t Hoffset = thfp + thb - 1; \
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
index 9c5599ebe8ea..3dd2b88b19f7 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
@@ -109,7 +109,6 @@ namespace FTDI {
* - Handles auto-repetition by sending onTouchHeld to the active screen periodically.
* - Plays touch feedback "click" sounds when appropriate.
* - Performs debouncing to supress spurious touch events.
- *
*/
void EventLoop::process_events() {
// If the LCD is processing commands, don't check
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h
index 450b9c4415e0..a501de20ba87 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h
@@ -49,7 +49,6 @@
* ...
* }
* }
- *
*/
class PolyReader {
diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h
index 02c4717d77f4..15122ec69e15 100644
--- a/Marlin/src/lcd/extui/ui_api.h
+++ b/Marlin/src/lcd/extui/ui_api.h
@@ -375,7 +375,6 @@ namespace ExtUI {
* constexpr float increment = 10;
*
* UI_INCREMENT(TargetTemp_celsius, E0)
- *
*/
#define UI_INCREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) + inc, ##__VA_ARGS__)
#define UI_DECREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) - inc, ##__VA_ARGS__)
diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h
index 1cb64f985bcb..a5030fcd5636 100644
--- a/Marlin/src/lcd/language/language_an.h
+++ b/Marlin/src/lcd/language/language_an.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h
index 8917d98e681a..dcb06e31e703 100644
--- a/Marlin/src/lcd/language/language_bg.h
+++ b/Marlin/src/lcd/language/language_bg.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_5
diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h
index 1c4a029ff7dd..0657c4a75959 100644
--- a/Marlin/src/lcd/language/language_ca.h
+++ b/Marlin/src/lcd/language/language_ca.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_ca {
using namespace Language_en; // Inherit undefined strings from English
diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h
index b11a3686cb46..716c0a092956 100644
--- a/Marlin/src/lcd/language/language_cz.h
+++ b/Marlin/src/lcd/language/language_cz.h
@@ -31,7 +31,6 @@
* Translated by Petr Zahradnik, Computer Laboratory
* Blog and video blog Zahradnik se bavi
* https://www.zahradniksebavi.cz
- *
*/
#define DISPLAY_CHARSET_ISO10646_CZ
diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h
index da282be0b40f..0e4fa75aa610 100644
--- a/Marlin/src/lcd/language/language_da.h
+++ b/Marlin/src/lcd/language/language_da.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h
index 875444c0e7fe..5492cd5d5901 100644
--- a/Marlin/src/lcd/language/language_de.h
+++ b/Marlin/src/lcd/language/language_de.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_de {
diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h
index 8fe888765331..fea2bf58180d 100644
--- a/Marlin/src/lcd/language/language_el.h
+++ b/Marlin/src/lcd/language/language_el.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_GREEK
diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h
index ad170a348721..344618b1375e 100644
--- a/Marlin/src/lcd/language/language_el_gr.h
+++ b/Marlin/src/lcd/language/language_el_gr.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_GREEK
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index 04c58fd22a1d..f377a5184cb6 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define en 1234
diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h
index 15fa35ac75f5..c77b12ee7749 100644
--- a/Marlin/src/lcd/language/language_es.h
+++ b/Marlin/src/lcd/language/language_es.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_es {
diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h
index bee571bbde25..7e35c6ee41ec 100644
--- a/Marlin/src/lcd/language/language_eu.h
+++ b/Marlin/src/lcd/language/language_eu.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h
index 77424df35359..af7dd22af9f7 100644
--- a/Marlin/src/lcd/language/language_fi.h
+++ b/Marlin/src/lcd/language/language_fi.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h
index 21f7757fa953..714feeee9976 100644
--- a/Marlin/src/lcd/language/language_fr.h
+++ b/Marlin/src/lcd/language/language_fr.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h
index 53b0803518e5..2fd4bf69758a 100644
--- a/Marlin/src/lcd/language/language_gl.h
+++ b/Marlin/src/lcd/language/language_gl.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h
index 4873f5c25492..1b2ae41fcedb 100644
--- a/Marlin/src/lcd/language/language_hr.h
+++ b/Marlin/src/lcd/language/language_hr.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.
diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h
index 76aff51d9cc3..f93e5ee4e267 100644
--- a/Marlin/src/lcd/language/language_hu.h
+++ b/Marlin/src/lcd/language/language_hu.h
@@ -29,7 +29,6 @@
* A Magyar fordítást készítette: AntoszHUN
*
*
- *
*/
namespace Language_hu {
diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h
index e22e58708f51..a70463956a73 100644
--- a/Marlin/src/lcd/language/language_it.h
+++ b/Marlin/src/lcd/language/language_it.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h
index df6ad9b5d98f..f1289123a4e7 100644
--- a/Marlin/src/lcd/language/language_jp_kana.h
+++ b/Marlin/src/lcd/language/language_jp_kana.h
@@ -27,7 +27,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
//#define DISPLAY_CHARSET_ISO10646_KANA
diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h
index 2ffcdf7b41e0..1ab03dcf57df 100644
--- a/Marlin/src/lcd/language/language_ko_KR.h
+++ b/Marlin/src/lcd/language/language_ko_KR.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_ko_KR {
using namespace Language_en; // Inherit undefined strings from English
diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h
index c1a1a0605b31..7b6c16b3b3ac 100644
--- a/Marlin/src/lcd/language/language_nl.h
+++ b/Marlin/src/lcd/language/language_nl.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h
index f6a9e12c8ee5..770c872a4099 100644
--- a/Marlin/src/lcd/language/language_pl.h
+++ b/Marlin/src/lcd/language/language_pl.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_PL
diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h
index 8bd94d06e154..56426c032104 100644
--- a/Marlin/src/lcd/language/language_pt.h
+++ b/Marlin/src/lcd/language/language_pt.h
@@ -27,7 +27,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_1
diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h
index eb1e2f9bf32e..cf2f7a0ccef1 100644
--- a/Marlin/src/lcd/language/language_pt_br.h
+++ b/Marlin/src/lcd/language/language_pt_br.h
@@ -27,7 +27,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_pt_br {
using namespace Language_en; // Inherit undefined strings from English
diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h
index b8c146e515e8..0953bb8a71f8 100644
--- a/Marlin/src/lcd/language/language_ru.h
+++ b/Marlin/src/lcd/language/language_ru.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_5
diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h
index e936110d0768..8a59bfc673f0 100644
--- a/Marlin/src/lcd/language/language_sk.h
+++ b/Marlin/src/lcd/language/language_sk.h
@@ -30,7 +30,6 @@
*
* Translated by Michal Holeš, Farma MaM
* https://www.facebook.com/farmamam
- *
*/
#define DISPLAY_CHARSET_ISO10646_SK
diff --git a/Marlin/src/lcd/language/language_test.h b/Marlin/src/lcd/language/language_test.h
index b15f20619e7d..16cafbebbe2e 100644
--- a/Marlin/src/lcd/language/language_test.h
+++ b/Marlin/src/lcd/language/language_test.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
// Select ONE of the following Mappers.
diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h
index 95e4fb2a8bad..90208befe709 100644
--- a/Marlin/src/lcd/language/language_tr.h
+++ b/Marlin/src/lcd/language/language_tr.h
@@ -30,7 +30,6 @@
* Bu çeviri dosyasındaki sorunlar ve düzeltmeler için iletişim;
* Contact for issues and corrections in this translation file;
* Yücel Temel - (info@elektromanyetix.com) - https://elektromanyetix.com/
- *
*/
#define DISPLAY_CHARSET_ISO10646_TR
diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h
index 9041decbb251..54171e1ebc06 100644
--- a/Marlin/src/lcd/language/language_uk.h
+++ b/Marlin/src/lcd/language/language_uk.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
#define DISPLAY_CHARSET_ISO10646_5
diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h
index afd87d379838..fb60a5d82194 100644
--- a/Marlin/src/lcd/language/language_vi.h
+++ b/Marlin/src/lcd/language/language_vi.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_vi {
using namespace Language_en; // Inherit undefined strings from English
diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
index d30ee789dd85..53dac64c0b87 100644
--- a/Marlin/src/lcd/language/language_zh_CN.h
+++ b/Marlin/src/lcd/language/language_zh_CN.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_zh_CN {
using namespace Language_en; // Inherit undefined strings from English
diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h
index 6764af6d73ce..7f1fce649ea9 100644
--- a/Marlin/src/lcd/language/language_zh_TW.h
+++ b/Marlin/src/lcd/language/language_zh_TW.h
@@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
- *
*/
namespace Language_zh_TW {
using namespace Language_en; // Inherit undefined strings from English
diff --git a/Marlin/src/lcd/menu/menu_filament.cpp b/Marlin/src/lcd/menu/menu_filament.cpp
index 5d02d674aa84..d116a6a398c0 100644
--- a/Marlin/src/lcd/menu/menu_filament.cpp
+++ b/Marlin/src/lcd/menu/menu_filament.cpp
@@ -101,9 +101,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
}
/**
- *
* "Change Filament" submenu
- *
*/
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
diff --git a/Marlin/src/libs/least_squares_fit.cpp b/Marlin/src/libs/least_squares_fit.cpp
index ef6ef9e90d80..c7593c049fc4 100644
--- a/Marlin/src/libs/least_squares_fit.cpp
+++ b/Marlin/src/libs/least_squares_fit.cpp
@@ -29,7 +29,6 @@
* it saves roughly 10K of program memory. It also does not require all of
* coordinates to be present during the calculations. Each point can be
* probed and then discarded.
- *
*/
#include "../inc/MarlinConfig.h"
diff --git a/Marlin/src/libs/least_squares_fit.h b/Marlin/src/libs/least_squares_fit.h
index 5cd6a02514c5..44ca8afc76d8 100644
--- a/Marlin/src/libs/least_squares_fit.h
+++ b/Marlin/src/libs/least_squares_fit.h
@@ -30,7 +30,6 @@
* it saves roughly 10K of program memory. And even better... the data
* fed into the algorithm does not need to all be present at the same time.
* A point can be probed and its values fed into the algorithm and then discarded.
- *
*/
#include "../inc/MarlinConfig.h"
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index 2ef00f795953..4ad7c4ccf044 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -339,7 +339,6 @@ void Planner::init() {
* const uint32_t r = _BV(24) - x * d; // Estimate remainder
* if (r >= d) x++; // Check whether to adjust result
* return uint32_t(x); // x holds the proper estimation
- *
*/
static uint32_t get_period_inverse(uint32_t d) {
@@ -2243,7 +2242,6 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#define MAX_E_JERK(N) TERN(HAS_LINEAR_E_JERK, max_e_jerk[E_INDEX_N(N)], max_jerk.e)
/**
- *
* Use LIN_ADVANCE for blocks if all these are true:
*
* esteps : This is a print move, because we checked for A, B, C steps before.
diff --git a/Marlin/src/module/planner_bezier.cpp b/Marlin/src/module/planner_bezier.cpp
index 4025b773ed5c..02d878d5f51a 100644
--- a/Marlin/src/module/planner_bezier.cpp
+++ b/Marlin/src/module/planner_bezier.cpp
@@ -24,7 +24,6 @@
* planner_bezier.cpp
*
* Compute and buffer movement commands for bezier curves
- *
*/
#include "../inc/MarlinConfig.h"
diff --git a/Marlin/src/module/planner_bezier.h b/Marlin/src/module/planner_bezier.h
index 41a88b4058fd..72048c42739a 100644
--- a/Marlin/src/module/planner_bezier.h
+++ b/Marlin/src/module/planner_bezier.h
@@ -25,7 +25,6 @@
* planner_bezier.h
*
* Compute and buffer movement commands for Bézier curves
- *
*/
#include "../core/types.h"
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index dd6bd70d2c64..defc22b1fe8e 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -729,7 +729,6 @@ float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise
* when starting up the machine or rebooting the board.
* There's no way to know where the nozzle is positioned until
* homing has been done - no homing with z-probe without init!
- *
*/
STOW_Z_SERVO();
}
diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
index 0fc23099ccb8..3ccd8ffd9185 100644
--- a/Marlin/src/module/settings.cpp
+++ b/Marlin/src/module/settings.cpp
@@ -33,7 +33,6 @@
* ALSO: Variables in the Store and Retrieve sections must be in the same order.
* If a feature is disabled, some data must still be written that, when read,
* either sets a Sane Default, or results in No Change to the existing value.
- *
*/
// Change EEPROM version if the structure changes
diff --git a/Marlin/src/module/thermistor/thermistor_30.h b/Marlin/src/module/thermistor/thermistor_30.h
index 63cde610a4c4..bc1781b1351c 100644
--- a/Marlin/src/module/thermistor/thermistor_30.h
+++ b/Marlin/src/module/thermistor/thermistor_30.h
@@ -26,11 +26,11 @@
// Resistance Tolerance + / -1%
// B Value 3950K at 25/50 deg. C
// B Value Tolerance + / - 1%
-// Kis3d Silicone Heater 24V 200W/300W with 6mm Precision cast plate (EN AW 5083)
+// Kis3d Silicone Heater 24V 200W/300W with 6mm Precision cast plate (EN AW 5083)
// Temperature setting time 10 min to determine the 12Bit ADC value on the surface. (le3tspeak)
const temp_entry_t temptable_30[] PROGMEM = {
- { OV( 1), 938 },
- { OV( 298), 125 }, // 1193 - 125°
+ { OV( 1), 938 },
+ { OV( 298), 125 }, // 1193 - 125°
{ OV( 321), 121 }, // 1285 - 121°
{ OV( 348), 117 }, // 1392 - 117°
{ OV( 387), 113 }, // 1550 - 113°
diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
index c59c90ad1d59..df182049f994 100644
--- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
+++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
@@ -27,7 +27,6 @@
* Applies to the following boards:
*
* BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
- *
*/
#if NOT_TARGET(MCU_LPC1768)
diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
index 335e3a588d88..bcff04eb85e8 100644
--- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
+++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
@@ -27,7 +27,6 @@
* Applies to the following boards:
*
* BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
- *
*/
#if NOT_TARGET(MCU_LPC1768)
diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
index 1290200e55c3..196503c822c5 100644
--- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
+++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
@@ -372,7 +372,6 @@
* P1_31 - not 5V tolerant - EXP1
* P0_27 - open collector - EXP2
* P0_28 - open collector - EXP2
- *
*/
/**
@@ -387,5 +386,4 @@
* P0_03 - AUX1
* P0_29 - Port -1
* P0_30 - USB
- *
*/
diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
index 41763fb33c3a..c602af1c3028 100644
--- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
@@ -31,7 +31,6 @@
* RAMPS_14_EFF (Hotend, Fan0, Fan1)
* RAMPS_14_EEF (Hotend0, Hotend1, Fan)
* RAMPS_14_SF (Spindle, Controller Fan)
- *
*/
// Numbers in parentheses () are the corresponding mega2560 pin numbers
diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
index 0916d0d65b38..76c54c3bba21 100644
--- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
+++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
+ * along with this program. If not, see .
*
*/
#pragma once
diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
index 19c2d5032050..d67549997be5 100644
--- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
+++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
@@ -26,7 +26,6 @@
*
* The pins diagram can be found and the following URL:
* https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf
- *
*/
#if NOT_TARGET(MCU_LPC1769)
diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
index 50e7eb1914f1..a0174f260298 100644
--- a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
+++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
@@ -166,7 +166,6 @@
*
* A remote SD card is currently not supported because the pins routed to the EXP2
* connector are shared with the onboard SD card.
- *
*/
#if ENABLED(CR10_STOCKDISPLAY)
diff --git a/Marlin/src/pins/mega/pins_INTAMSYS40.h b/Marlin/src/pins/mega/pins_INTAMSYS40.h
index 3c4f3c719a99..be5f461dda38 100644
--- a/Marlin/src/pins/mega/pins_INTAMSYS40.h
+++ b/Marlin/src/pins/mega/pins_INTAMSYS40.h
@@ -137,7 +137,6 @@
///////////////////// SPARE HEADERS //////////////
/**
- *
* J25
* 1 D54
* 2 D55
diff --git a/Marlin/src/pins/mega/pins_MINITRONICS.h b/Marlin/src/pins/mega/pins_MINITRONICS.h
index 9cb4401da90c..bbe746461eca 100644
--- a/Marlin/src/pins/mega/pins_MINITRONICS.h
+++ b/Marlin/src/pins/mega/pins_MINITRONICS.h
@@ -29,7 +29,6 @@
* Rev B 2 JAN 2017
*
* Added pin definitions for M3, M4 & M5 spindle control commands
- *
*/
#if NOT_TARGET(__AVR_ATmega1281__)
diff --git a/Marlin/src/pins/pinsDebug.h b/Marlin/src/pins/pinsDebug.h
index 06a8144291ca..5f153cfa2b0f 100644
--- a/Marlin/src/pins/pinsDebug.h
+++ b/Marlin/src/pins/pinsDebug.h
@@ -31,7 +31,6 @@
*
* Both passes use the same pin list. The list contains two macro names. The
* actual macro definitions are changed depending on which pass is being done.
- *
*/
// first pass - put the name strings into FLASH
diff --git a/Marlin/src/pins/ramps/pins_RAMPS_13.h b/Marlin/src/pins/ramps/pins_RAMPS_13.h
index 032dd79c234d..6e7c8cbab592 100644
--- a/Marlin/src/pins/ramps/pins_RAMPS_13.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS_13.h
@@ -31,7 +31,6 @@
* RAMPS_13_EFF (Extruder, Fan, Fan)
* RAMPS_13_EEF (Extruder, Extruder, Fan)
* RAMPS_13_SF (Spindle, Controller Fan)
- *
*/
#ifndef BOARD_INFO_NAME
diff --git a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h
index 19209f1e2363..9908d9494f34 100644
--- a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h
@@ -35,7 +35,6 @@
* RAMPS_PLUS_EFF (Extruder, Fan, Fan)
* RAMPS_PLUS_EEF (Extruder, Extruder, Fan)
* RAMPS_PLUS_SF (Spindle, Controller Fan)
- *
*/
#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
diff --git a/Marlin/src/pins/sam/pins_ADSK.h b/Marlin/src/pins/sam/pins_ADSK.h
index c4d7c079407c..b0e171cf1716 100644
--- a/Marlin/src/pins/sam/pins_ADSK.h
+++ b/Marlin/src/pins/sam/pins_ADSK.h
@@ -204,5 +204,4 @@ A stepper for E0 extruder
*
* Standard ethernet pairs: 1&2, 3&6, 4&5, 7&8
* Use CAT7 cable to have all pairs shielded
- *
*/
diff --git a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h
index 2cfbecc08646..22edb7021302 100644
--- a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h
+++ b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h
@@ -170,5 +170,4 @@
* None of these are in the arduino_due_x variant so digitalWrite and digitalRead can't be used on them.
*
* They can be accessed via FASTIO functions WRITE, READ, OUT_WRITE, OUTPUT, ...
- *
*/
diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h
index f33cdc83acef..74692a21a390 100644
--- a/Marlin/src/pins/sanguino/pins_ANET_10.h
+++ b/Marlin/src/pins/sanguino/pins_ANET_10.h
@@ -30,7 +30,6 @@
*
* 1) no longer uses Sanguino files to define some of the pins
* 2) added pointers to useable Arduino IDE extensions
- *
*/
/**
@@ -48,7 +47,6 @@
* "Anet V1.0 (Optiboot)" frees up another 3K of FLASH. You'll need to burn
* a new bootloader to the board to be able to automatically download a
* compiled image.
- *
*/
/**
@@ -66,7 +64,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
/**
diff --git a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h
index e927aac124db..29905c108954 100644
--- a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h
+++ b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h
@@ -29,7 +29,6 @@
* Rev B 26 DEC 2016
*
* added pointer to a current Arduino IDE extension
- *
*/
/**
@@ -47,7 +46,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__)
diff --git a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
index 1961446e2274..33fc233f7ab1 100644
--- a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
+++ b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
@@ -29,7 +29,6 @@
* Rev B 26 DEC 2016
*
* added pointer to a current Arduino IDE extension
- *
*/
/**
@@ -47,7 +46,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the SANGUINO board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__)
diff --git a/Marlin/src/pins/sanguino/pins_GEN6.h b/Marlin/src/pins/sanguino/pins_GEN6.h
index 98eb616892e6..bfca8e90d9cc 100644
--- a/Marlin/src/pins/sanguino/pins_GEN6.h
+++ b/Marlin/src/pins/sanguino/pins_GEN6.h
@@ -31,7 +31,6 @@
* 1) added pointer to a current Arduino IDE extension
* 2) added support for M3, M4 & M5 spindle control commands
* 3) added case light pin definition
- *
*/
/**
@@ -49,7 +48,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__)
diff --git a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h
index a40c2ec15fde..9c635706202c 100644
--- a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h
+++ b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h
@@ -29,7 +29,6 @@
* Rev B 26 DEC 2016
*
* added pointer to a current Arduino IDE extension
- *
*/
/**
@@ -47,7 +46,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the SANGUINO board and then select the CPU.
- *
*/
diff --git a/Marlin/src/pins/sanguino/pins_GEN7_12.h b/Marlin/src/pins/sanguino/pins_GEN7_12.h
index ed550624f789..9db7d7214a5b 100644
--- a/Marlin/src/pins/sanguino/pins_GEN7_12.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_12.h
@@ -31,7 +31,6 @@
* 1) added pointer to a current Arduino IDE extension
* 2) added support for M3, M4 & M5 spindle control commands
* 3) added case light pin definition
- *
*/
/**
@@ -49,7 +48,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__)
diff --git a/Marlin/src/pins/sanguino/pins_GEN7_13.h b/Marlin/src/pins/sanguino/pins_GEN7_13.h
index 6743c8cf75fc..55881aaff58e 100644
--- a/Marlin/src/pins/sanguino/pins_GEN7_13.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_13.h
@@ -29,7 +29,6 @@
* Rev B 26 DEC 2016
*
* added pointer to a current Arduino IDE extension
- *
*/
/**
@@ -47,7 +46,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#define BOARD_INFO_NAME "Gen7 v1.3"
diff --git a/Marlin/src/pins/sanguino/pins_GEN7_14.h b/Marlin/src/pins/sanguino/pins_GEN7_14.h
index 752fe3074f07..66dba533e988 100644
--- a/Marlin/src/pins/sanguino/pins_GEN7_14.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_14.h
@@ -31,7 +31,6 @@
* 1) added pointer to a current Arduino IDE extension
* 2) added support for M3, M4 & M5 spindle control commands
* 3) added case light pin definition
- *
*/
/**
@@ -49,7 +48,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__)
diff --git a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
index 1a19c33deac4..0c4871fb27d5 100644
--- a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
@@ -34,7 +34,6 @@
* 1) added pointer to a current Arduino IDE extension
* 2) added support for M3, M4 & M5 spindle control commands
* 3) added case light pin definition
- *
*/
/**
@@ -52,7 +51,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__)
diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h
index d9f43995d481..7f18283d1c54 100644
--- a/Marlin/src/pins/sanguino/pins_OMCA.h
+++ b/Marlin/src/pins/sanguino/pins_OMCA.h
@@ -56,7 +56,6 @@
* Rev B 26 DEC 2016
*
* added pointer to a current Arduino IDE extension
- *
*/
/**
@@ -74,7 +73,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__)
diff --git a/Marlin/src/pins/sanguino/pins_OMCA_A.h b/Marlin/src/pins/sanguino/pins_OMCA_A.h
index 1b4c9b68b215..770732051900 100644
--- a/Marlin/src/pins/sanguino/pins_OMCA_A.h
+++ b/Marlin/src/pins/sanguino/pins_OMCA_A.h
@@ -48,14 +48,12 @@
* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
* +--------+
- *
*/
/**
* Rev B 26 DEC 2016
*
* added pointer to a current Arduino IDE extension
- *
*/
/**
@@ -73,7 +71,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644__)
diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
index 121e1db6f211..438d49d615c8 100644
--- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
+++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
@@ -31,7 +31,6 @@
* 1) added pointer to a current Arduino IDE extension
* 2) added support for M3, M4 & M5 spindle control commands
* 3) added case light pin definition
- *
*/
/**
@@ -49,7 +48,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__)
diff --git a/Marlin/src/pins/sanguino/pins_SETHI.h b/Marlin/src/pins/sanguino/pins_SETHI.h
index e0a0604619ce..dc2133e441dc 100644
--- a/Marlin/src/pins/sanguino/pins_SETHI.h
+++ b/Marlin/src/pins/sanguino/pins_SETHI.h
@@ -47,7 +47,6 @@
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.
- *
*/
#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__)
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
index 2bc94c45c5e7..63b97b666faf 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
@@ -257,7 +257,6 @@
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
- *
*/
#define CLCD_SPI_BUS 1 // SPI1 connector
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
index 09e47875ed67..50257f4f4608 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
@@ -202,7 +202,6 @@
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
- *
*/
#define TFTGLCD_CS PA9
@@ -245,7 +244,6 @@
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
- *
*/
#define CLCD_SPI_BUS 1 // SPI1 connector
diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h
index 6cd970501fde..021ef1d5f6b8 100644
--- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h
+++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h
@@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
+ * along with this program. If not, see .
*
*/
#pragma once
diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h
index f386b7690b52..d52bb11d1206 100644
--- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h
+++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h
@@ -23,7 +23,6 @@
/**
* Common pin assignments for all RUMBA32 boards
- *
*/
#if NOT_TARGET(STM32F4)
diff --git a/Marlin/src/pins/teensy2/pins_TEENSYLU.h b/Marlin/src/pins/teensy2/pins_TEENSYLU.h
index 09bbeebdd8c3..9de119b62b4a 100644
--- a/Marlin/src/pins/teensy2/pins_TEENSYLU.h
+++ b/Marlin/src/pins/teensy2/pins_TEENSYLU.h
@@ -17,7 +17,6 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
- *
*/
/**
diff --git a/Marlin/src/sd/SdBaseFile.cpp b/Marlin/src/sd/SdBaseFile.cpp
index 98d762f10b6a..2bc9f96e8c92 100644
--- a/Marlin/src/sd/SdBaseFile.cpp
+++ b/Marlin/src/sd/SdBaseFile.cpp
@@ -154,7 +154,6 @@ bool SdBaseFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) {
* an invalid DOS 8.3 file name, the FAT volume has not been initialized,
* a file is already open, the file already exists, the root
* directory is full or an I/O error.
- *
*/
bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char* path, uint32_t size) {
if (ENABLED(SDCARD_READONLY)) return false;
@@ -1663,7 +1662,6 @@ bool SdBaseFile::truncate(uint32_t length) {
* \a nbyte. If an error occurs, write() returns -1. Possible errors
* include write() is called before a file has been opened, write is called
* for a read-only file, device is full, a corrupt file system or an I/O error.
- *
*/
int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) {
#if ENABLED(SDCARD_READONLY)
diff --git a/Marlin/src/sd/SdFatStructs.h b/Marlin/src/sd/SdFatStructs.h
index e06e05981ad2..484d4e50c6c9 100644
--- a/Marlin/src/sd/SdFatStructs.h
+++ b/Marlin/src/sd/SdFatStructs.h
@@ -128,7 +128,6 @@ typedef struct masterBootRecord mbr_t;
* \struct fat_boot
*
* \brief Boot sector for a FAT12/FAT16 volume.
- *
*/
struct fat_boot {
/**
@@ -409,7 +408,6 @@ uint32_t const FSINFO_LEAD_SIG = 0x41615252, // 'AaRR' Lead signature for a F
* \struct fat32_fsinfo
*
* \brief FSINFO sector for a FAT32 volume.
- *
*/
struct fat32_fsinfo {
uint32_t leadSignature; // must be 0x52, 0x52, 0x61, 0x41 'RRaA'
diff --git a/Marlin/src/sd/SdFile.cpp b/Marlin/src/sd/SdFile.cpp
index a4f048d9502c..c82fe2c5ed77 100644
--- a/Marlin/src/sd/SdFile.cpp
+++ b/Marlin/src/sd/SdFile.cpp
@@ -57,7 +57,6 @@ SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) { }
* \a nbyte. If an error occurs, write() returns -1. Possible errors
* include write() is called before a file has been opened, write is called
* for a read-only file, device is full, a corrupt file system or an I/O error.
- *
*/
int16_t SdFile::write(const void* buf, uint16_t nbyte) { return SdBaseFile::write(buf, nbyte); }
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp
index 8f0dbf42e957..8a989157b40a 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp
@@ -640,7 +640,6 @@ uint8_t USB::AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lo
* 7: for (each driver) {
* 7a: Ask device if it knows this VID/PID. Acts exactly like 6a, but using VID/PID
* 8: if we get here, no driver likes the device plugged in, so exit failure.
- *
*/
uint8_t USB::Configuring(uint8_t parent, uint8_t port, bool lowspeed) {
//uint8_t bAddress = 0;
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp
index 8ead0b0093b6..d707a41a2702 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp
@@ -828,7 +828,6 @@ uint8_t BulkOnly::ClearEpHalt(uint8_t index) {
/**
* For driver use only.
- *
*/
void BulkOnly::Reset() {
while (pUsb->ctrlReq(bAddress, 0, bmREQ_MASSOUT, MASS_REQ_BOMSR, 0, 0, bIface, 0, 0, nullptr, nullptr) == 0x01) delay(6);
@@ -1163,7 +1162,6 @@ uint8_t BulkOnly::HandleSCSIError(uint8_t status) {
////////////////////////////////////////////////////////////////////////////////
/**
- *
* @param ep_ptr
*/
void BulkOnly::PrintEndpointDescriptor(const USB_FD_ENDPOINT_DESCRIPTOR * ep_ptr) {
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h
index 45830de9a162..15ed427697b6 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h
@@ -318,7 +318,6 @@ UHS_NI UHS_Bulk_Storage::UHS_Bulk_Storage(UHS_USB_HOST_BASE *p) {
}
/**
- *
* @param ei Enumeration information
* @return true if this interface driver can handle this interface description
*/
@@ -375,7 +374,6 @@ uint8_t UHS_NI UHS_Bulk_Storage::SetInterface(ENUMERATION_INFO *ei) {
};
/**
- *
* @return 0 for success
*/
uint8_t UHS_NI UHS_Bulk_Storage::Start() {
@@ -628,7 +626,6 @@ void UHS_NI UHS_Bulk_Storage::CheckMedia() {
/**
* For driver use only.
- *
*/
void UHS_NI UHS_Bulk_Storage::Poll() {
if((long)(millis() - qNextPollTime) >= 0L) {
@@ -839,7 +836,6 @@ uint8_t UHS_NI UHS_Bulk_Storage::ClearEpHalt(uint8_t index) {
/**
* For driver use only.
- *
*/
void UHS_NI UHS_Bulk_Storage::Reset() {
if(!bAddress) return;
@@ -1185,7 +1181,6 @@ uint8_t UHS_NI UHS_Bulk_Storage::HandleSCSIError(uint8_t status) {
////////////////////////////////////////////////////////////////////////////////
/**
- *
* @param ep_ptr
*/
void UHS_NI UHS_Bulk_Storage::PrintEndpointDescriptor(const USB_FD_ENDPOINT_DESCRIPTOR * ep_ptr) {
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h
index dec083390e3c..7843013b0442 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h
@@ -101,7 +101,6 @@ uint8_t UHS_USB_HOST_BASE::setEpInfoEntry(uint8_t addr, uint8_t iface, uint8_t e
*
* @param maxep How many endpoints to initialize
* @param device pointer to the device driver instance (this)
- *
*/
void UHS_USB_HOST_BASE::DeviceDefaults(uint8_t maxep, UHS_USBInterface *interface) {
@@ -208,7 +207,6 @@ uint8_t UHS_USB_HOST_BASE::doSoftReset(uint8_t parent, uint8_t port, uint8_t add
* example of one of these documents, see page Five:
* https://www.ftdichip.com/Support/Documents/TechnicalNotes/TN_113_Simplified%20Description%20of%20USB%20Device%20Enumeration.pdf
*
- *
*/
/**
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
index 625666170bca..b289a896efea 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
@@ -350,7 +350,6 @@ class UHS_USBInterface {
/**
* Executed before anything else in Release().
- *
*/
virtual void OnRelease() {
return;
@@ -403,7 +402,6 @@ class UHS_USBInterface {
#if 0
/**
- *
* @return true if this interface is Vendor Specific.
*/
virtual bool IsVSI() {
@@ -414,7 +412,6 @@ class UHS_USBInterface {
#if 0
/**
- *
* Vendor Specific interface class.
* This is used by a partner interface.
* It can also be used to force-enumerate an interface that
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h
index 114064044d17..0ac90f0df3a6 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h
@@ -6,7 +6,6 @@
*
* To test:
* gcc -DAJK_TEST_MACRO_LOGIC -E macro_logic.h
- *
*/
#ifndef MACRO_LOGIC_H
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h
index 5408a94ade70..f86054cad8a4 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h
@@ -165,7 +165,6 @@ static void Init_dyn_SWI() {
}
/**
- *
* @param klass class that extends dyn_SWI
* @return 0 on queue full, else returns queue position (ones based)
*/
@@ -219,7 +218,6 @@ static void Init_dyn_SWI() {
}
/**
- *
* @param klass class that extends dyn_SWI
* @return 0 on queue full, else returns queue position (ones based)
*/