diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index a010480c6144..17255d1f2520 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -966,6 +966,9 @@
    */
   //#define BLTOUCH_SET_5V_MODE
 
+  // Safety: Enable voltage mode settings in the LCD menu.
+  //#define BLTOUCH_LCD_VOLTAGE_MENU
+
   /**
    * Safety: Activate if connecting a probe with an unknown voltage mode.
    * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
@@ -984,8 +987,12 @@
    */
   //#define BLTOUCH_HS_MODE true
 
-  // Safety: Enable voltage mode settings in the LCD menu.
-  //#define BLTOUCH_LCD_VOLTAGE_MENU
+  #if ENABLED(BLTOUCH_HS_MODE)
+    // The probe Z offset (M851 Z) is the height at which the probe triggers.
+    // This must be large enough to keep the probe pin off the bed and prevent
+    // it from snagging on the bed clips.
+    #define BLTOUCH_HS_EXTRA_CLEARANCE    7 // Extra Z Clearance
+  #endif
 
 #endif // BLTOUCH
 
diff --git a/Marlin/src/feature/bltouch.h b/Marlin/src/feature/bltouch.h
index fa857bb96ab6..2ced649a4eb2 100644
--- a/Marlin/src/feature/bltouch.h
+++ b/Marlin/src/feature/bltouch.h
@@ -76,7 +76,7 @@ class BLTouch {
     static constexpr bool high_speed_mode = false;
   #endif
 
-  static float z_extra_clearance() { return high_speed_mode ? 7 : 0; }
+  static float z_extra_clearance() { return high_speed_mode ? TERN0(BLTOUCH_HS_MODE, BLTOUCH_HS_EXTRA_CLEARANCE) : 0; }
 
   // DEPLOY and STOW are wrapped for error handling - these are used by homing and by probing
   static bool deploy()              { return deploy_proc(); }
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 7dbd4c765d56..5c594abff3dc 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1895,9 +1895,15 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
       #endif
     #endif
 
-    #if ENABLED(BLTOUCH_HS_MODE) && BLTOUCH_HS_MODE == 0
-      #error "BLTOUCH_HS_MODE must now be defined as true or false, indicating the default state."
+    #if ENABLED(BLTOUCH_HS_MODE)
+      #if BLTOUCH_HS_MODE == 0
+        #error "BLTOUCH_HS_MODE must now be defined as true or false, indicating the default state."
+      #endif
+      #ifdef BLTOUCH_HS_EXTRA_CLEARANCE
+        static_assert(BLTOUCH_HS_EXTRA_CLEARANCE > 0, "BLTOUCH_HS_MODE requires a positive BLTOUCH_HS_EXTRA_CLEARANCE.");
+      #endif
     #endif
+
     #if BLTOUCH_DELAY < 200
       #error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
     #endif