mv_ddr4_training_leveling.c

/*******************************************************************************
Copyright (C) 2016 Marvell International Ltd.

This software file (the "File") is owned and distributed by Marvell
International Ltd. and/or its affiliates ("Marvell") under the following
alternative licensing terms.  Once you have made an election to distribute the
File under one of the following license alternatives, please (i) delete this
introductory statement regarding license alternatives, (ii) delete the three
license alternatives that you have not elected to use and (iii) preserve the
Marvell copyright notice above.

********************************************************************************
Marvell Commercial License Option

If you received this File from Marvell and you have entered into a commercial
license agreement (a "Commercial License") with Marvell, the File is licensed
to you under the terms of the applicable Commercial License.

********************************************************************************
Marvell GPL License Option

This program is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation, either version 2 of the License, or any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

********************************************************************************
Marvell GNU General Public License FreeRTOS Exception

If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File in accordance with the terms and conditions of the Lesser
General Public License Version 2.1 plus the following FreeRTOS exception.
An independent module is a module which is not derived from or based on
FreeRTOS.
Clause 1:
Linking FreeRTOS statically or dynamically with other modules is making a
combined work based on FreeRTOS. Thus, the terms and conditions of the GNU
General Public License cover the whole combination.
As a special exception, the copyright holder of FreeRTOS gives you permission
to link FreeRTOS with independent modules that communicate with FreeRTOS solely
through the FreeRTOS API interface, regardless of the license terms of these
independent modules, and to copy and distribute the resulting combined work
under terms of your choice, provided that:
1. Every copy of the combined work is accompanied by a written statement that
details to the recipient the version of FreeRTOS used and an offer by yourself
to provide the FreeRTOS source code (including any modifications you may have
made) should the recipient request it.
2. The combined work is not itself an RTOS, scheduler, kernel or related
product.
3. The independent modules add significant and primary functionality to
FreeRTOS and do not merely extend the existing functionality already present in
FreeRTOS.
Clause 2:
FreeRTOS may not be used for any competitive or comparative purpose, including
the publication of any form of run time or compile time metric, without the
express permission of Real Time Engineers Ltd. (this is the norm within the
industry and is intended to ensure information accuracy).

********************************************************************************
Marvell BSD License Option

If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File under the following licensing terms.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

	* Redistributions of source code must retain the above copyright notice,
	  this list of conditions and the following disclaimer.

	* Redistributions in binary form must reproduce the above copyright
	  notice, this list of conditions and the following disclaimer in the
	  documentation and/or other materials provided with the distribution.

	* Neither the name of Marvell nor the names of its contributors may be
	  used to endorse or promote products derived from this software without
	  specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

*******************************************************************************/

#if defined(CONFIG_DDR4)

#include "ddr3_init.h"
#include "mv_ddr_regs.h"

static int mv_ddr4_dynamic_pb_wl_supp(u32 dev_num, enum mv_wl_supp_mode ecc_mode);

/* compare test for ddr4 write leveling supplementary */
#define MV_DDR4_COMP_TEST_NO_RESULT	0
#define MV_DDR4_COMP_TEST_RESULT_0	1
#define MV_DDR4_XSB_COMP_PATTERNS_NUM	8

static u8 mv_ddr4_xsb_comp_test(u32 dev_num, u32 subphy_num, u32 if_id,
				enum mv_wl_supp_mode ecc_mode)
{
	u32 wl_invert;
	u8 pb_key, bit, bit_max, word;
	struct pattern_info *pattern_table = ddr3_tip_get_pattern_table();
	struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
	u32 subphy_max = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE);
	uint64_t read_pattern_64[MV_DDR4_XSB_COMP_PATTERNS_NUM] = {0};
	/*
	 * FIXME: the pattern below is used for writing to the memory
	 * by the cpu. it was changed to be written through the odpg.
	 * for a workaround
	 * uint64_t pattern_test_table_64[MV_DDR4_XSB_COMP_PATTERNS_NUM] = {
	 *	0xffffffffffffffff,
	 *	0xffffffffffffffff,
	 *	0x0000000000000000,
	 *	0x0000000000000000,
	 *	0x0000000000000000,
	 *	0x0000000000000000,
	 *	0xffffffffffffffff,
	 *	0xffffffffffffffff};
	 */
	u32 read_pattern[MV_DDR4_XSB_COMP_PATTERNS_NUM];
	/*u32 pattern_test_table[MV_DDR4_XSB_COMP_PATTERNS_NUM] = {
		0xffffffff,
		0xffffffff,
		0x00000000,
		0x00000000,
		0x00000000,
		0x00000000,
		0xffffffff,
		0xffffffff};	TODO: use pattern_table_get_word */
	int i, status;
	uint64_t data64;
	uintptr_t addr64;
	int ecc_running = 0;
	u32 ecc_read_subphy_num = 0; /* FIXME: change ecc read subphy num to be configurable */
	u8 bit_counter = 0;
	int edge = 0;
	/* write and read data */
	if (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask)) {
		status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG,
					   effective_cs << ODPG_DATA_CS_OFFS,
					   ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS);
		if (status != MV_OK)
			return status;

		addr64 = (uintptr_t)pattern_table[PATTERN_TEST].start_addr;
		/*
		 * FIXME: changed the load pattern to memory through the odpg
		 * this change is needed to be validate
		 * this change is done due to un calibrated dm at this stage
		 * the below code is the code for loading the pattern directly
		 * to the memory
		 *
		 * for (i = 0; i < MV_DDR4_XSB_COMP_PATTERNS_NUM; i++) {
		 *	data64 = pattern_test_table_64[i];
		 *	writeq(addr64, data64);
		 *	addr64 +=  sizeof(uint64_t);
		 *}
		 * FIXME: the below code loads the pattern to the memory through the odpg
		 * it loads it twice to due supplementary failure, need to check it
		 */
		int j;
		for (j = 0; j < 2; j++)
			ddr3_tip_load_pattern_to_mem(dev_num, PATTERN_TEST);

	} else if (MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(tm->bus_act_mask, subphy_max)) {
		status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG,
					       effective_cs << ODPG_DATA_CS_OFFS,
					       ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS);
		if (status != MV_OK)
			return status;

		/*
		 * FIXME: changed the load pattern to memory through the odpg
		 * this change is needed to be validate
		 * this change is done due to un calibrated dm at this stage
		 * the below code is the code for loading the pattern directly
		 * to the memory
		 */
		int j;
		for (j = 0; j < 2; j++)
			ddr3_tip_load_pattern_to_mem(dev_num, PATTERN_TEST);
	} else {
		/*
		 * FIXME: changed the load pattern to memory through the odpg
		 * this change is needed to be validate
		 * this change is done due to un calibrated dm at this stage
		 * the below code is the code for loading the pattern directly
		 * to the memory
		 */
		int j;
		for (j = 0; j < 2; j++)
			ddr3_tip_load_pattern_to_mem(dev_num, PATTERN_TEST);
	}

	if ((ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4) ||
	    (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3 ||
	     ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8)) {
		/* disable ecc write mux */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_SW_2_REG, 0x0, 0x100);
		if (status != MV_OK)
			return status;

		/* enable read data ecc mux */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_SW_2_REG, 0x3, 0x3);
		if (status != MV_OK)
			return status;

		/* unset training start bit */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_REG, 0x80000000, 0x80000000);
		if (status != MV_OK)
			return status;

		ecc_running = 1;
		ecc_read_subphy_num = ECC_READ_BUS_0;
	}

	if (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask)) {
		status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG,
					       effective_cs << ODPG_DATA_CS_OFFS,
					       ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS);
		if (status != MV_OK)
			return status;
		/*
		 * in case of reading the pattern read it from the address x 8
		 * the odpg multiply by 8 the addres to read from
		 */
		addr64 = ((uintptr_t)pattern_table[PATTERN_TEST].start_addr) << 3;
		for (i = 0; i < MV_DDR4_XSB_COMP_PATTERNS_NUM; i++) {
			data64 = readq(addr64);
			addr64 +=  sizeof(uint64_t);
			read_pattern_64[i] = data64;
		}

		DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("xsb comp: if %d bus id %d\n", 0, subphy_num));
		for (edge = 0; edge < 8; edge++)
			DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("0x%16llx\n", (unsigned long long)read_pattern_64[edge]));
		DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("\n"));
	} else if (MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(tm->bus_act_mask, subphy_max)) {
		status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG,
					       effective_cs << ODPG_DATA_CS_OFFS,
					       ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS);
		if (status != MV_OK)
			return status;

		status = ddr3_tip_ext_read(dev_num, if_id, pattern_table[PATTERN_TEST].start_addr << 3,
					   1, read_pattern);
		if (status != MV_OK)
			return status;

		DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("xsb comp: if %d bus id %d\n", 0, subphy_num));
		for (edge = 0; edge < 8; edge++)
			DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("0x%16x\n", read_pattern[edge]));
		DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("\n"));
	} else {
		status = ddr3_tip_ext_read(dev_num, if_id, ((pattern_table[PATTERN_TEST].start_addr << 3) +
					    ((SDRAM_CS_SIZE + 1) * effective_cs)), 1, read_pattern);
		if (status != MV_OK)
			return status;

		DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("xsb comp: if %d bus id %d\n", 0, subphy_num));
		for (edge = 0; edge < 8; edge++)
			DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("0x%16x\n", read_pattern[edge]));
		DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("\n"));
	}

	/* read centralization result to decide on half phase by inverse bit */
	status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA,
				   CTX_PHY_REG(0), &wl_invert);
	if (status != MV_OK)
		return status;

	if ((wl_invert & 0x20) != 0)
		wl_invert = 1;
	else
		wl_invert = 0;

	/* for ecc, read from the "read" subphy (usualy subphy 0) */
	if (ecc_running)
		subphy_num = ecc_read_subphy_num;

	/* per bit loop*/
	bit_max = subphy_num * BUS_WIDTH_IN_BITS + BUS_WIDTH_IN_BITS;
	for (bit = subphy_num * BUS_WIDTH_IN_BITS; bit < bit_max; bit++) {
		/* get per bit pattern key (value of the same bit in the pattern) */
		pb_key = 0;
		for (word = 0; word < MV_DDR4_XSB_COMP_PATTERNS_NUM; word++) {
			if (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask)) {
				if ((read_pattern_64[word] & ((uint64_t)1 << bit)) != 0)
					pb_key |= (1 << word);
			} else {
				if ((read_pattern[word] & (1 << bit)) != 0)
					pb_key |= (1 << word);
			}
		}

		/* find the key value and make decision */
		switch (pb_key) {
		/* case(s) for 0 */
		case 0b11000011:	/* nominal */
		case 0b10000011:	/* sample at start of UI sample at the dqvref TH */
		case 0b10000111:	/* sample at start of UI sample at the dqvref TH */
		case 0b11000001:	/* sample at start of UI sample at the dqvref TH */
		case 0b11100001:	/* sample at start of UI sample at the dqvref TH */
		case 0b11100011:	/* sample at start of UI sample at the dqvref TH */
		case 0b11000111:	/* sample at start of UI sample at the dqvref TH */
			bit_counter++;
			break;
		} /* end of switch */
	} /* end of per bit loop */

	/* check all bits in the current subphy has met the switch condition above */
	if (bit_counter == BUS_WIDTH_IN_BITS)
		return MV_DDR4_COMP_TEST_RESULT_0;
	else {
		DEBUG_LEVELING(
			       DEBUG_LEVEL_INFO,
			       ("different supplementary results (%d -> %d)\n",
			       MV_DDR4_COMP_TEST_NO_RESULT, MV_DDR4_COMP_TEST_RESULT_0));
		return MV_DDR4_COMP_TEST_NO_RESULT;
	}
}

int mv_ddr4_dynamic_wl_supp(u32 dev_num)
{
	int status = MV_OK;
	struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();

	if (DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask) ||
	    DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask) ||
	    DDR3_IS_ECC_PUP8_MODE(tm->bus_act_mask)) {
		if (DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask))
			status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4);
		else if (DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask))
			status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3);
		else /* WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8 */
			status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8);
		if (status != MV_OK)
			return status;
		status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_DATA_PUPS);
	} else { /* regular supplementary for data subphys in non-ecc mode */
		status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_REG_MODE);
	}

	return status;
}

/* dynamic per bit write leveling supplementary */
static int mv_ddr4_dynamic_pb_wl_supp(u32 dev_num, enum mv_wl_supp_mode ecc_mode)
{
	u32 if_id;
	u32 subphy_start, subphy_end;
	u32 subphy_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE);
	u8 compare_result = 0;
	u32 orig_phase;
	u32 rd_data, wr_data = 0;
	u32 flag, step;
	struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
	u32 ecc_phy_access_id;
	int status;

	if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4 ||
	    ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3 ||
	    ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8) {
		/* enable ecc write mux */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_SW_2_REG, 0x100, 0x100);
		if (status != MV_OK)
			return status;

		/* disable read data ecc mux */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_SW_2_REG, 0x0, 0x3);
		if (status != MV_OK)
			return status;

		/* unset training start bit */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_REG, 0x0, 0x80000000);
		if (status != MV_OK)
			return status;

		if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3)
			ecc_phy_access_id = ECC_PHY_ACCESS_3;
		else if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4)
			ecc_phy_access_id = ECC_PHY_ACCESS_4;
		else /* ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8 */
			ecc_phy_access_id = ECC_PHY_ACCESS_8;

		subphy_start = ecc_phy_access_id;
		subphy_end = subphy_start + 1;
	} else if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_DATA_PUPS) {
		/* disable ecc write mux */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_SW_2_REG, 0x0, 0x100);
		if (status != MV_OK)
			return status;

		/* disable ecc mode*/
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   SDRAM_CFG_REG, 0, 0x40000);
		if (status != MV_OK)
			return status;

		subphy_start = 0;
		if (MV_DDR_IS_HALF_BUS_DRAM_MODE(tm->bus_act_mask, subphy_num))
			subphy_end = (subphy_num - 1) / 2;
		else
			subphy_end = subphy_num - 1;
	} else { /* ecc_mode == WRITE_LEVELING_SUPP_REG_MODE */
		subphy_start = 0;
		/* remove ecc subphy prior to algorithm's start */
		subphy_end = subphy_num - 1; /* TODO: check it */
	}

	for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) {
		VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id);
		for (subphy_num = subphy_start; subphy_num < subphy_end; subphy_num++) {
			VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num);
			flag = 1;
			step = 0;
			status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA,
						   WL_PHY_REG(effective_cs), &rd_data);
			if (status != MV_OK)
				return status;
			orig_phase = (rd_data >> 6) & 0x7;
			while (flag != 0) {
				/* get decision for subphy */
				compare_result = mv_ddr4_xsb_comp_test(dev_num, subphy_num, if_id, ecc_mode);
				if (compare_result == MV_DDR4_COMP_TEST_RESULT_0) {
					flag = 0;
				} else { /* shift phase to -1 */
					step++;
					if (step == 1) { /* set phase (0x0[6-8]) to -2 */
						if (orig_phase > 1)
							wr_data = (rd_data & ~0x1c0) | ((orig_phase - 2) << 6);
						else if (orig_phase == 1)
							wr_data = (rd_data & ~0x1df);
						if (orig_phase >= 1)
							ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id,
									   ACCESS_TYPE_UNICAST, subphy_num,
									   DDR_PHY_DATA,
									   WL_PHY_REG(effective_cs), wr_data);
					} else if (step == 2) { /* shift phase to +1 */
						if (orig_phase <= 5) {
							wr_data = (rd_data & ~0x1c0) | ((orig_phase + 2) << 6);
							ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id,
									   ACCESS_TYPE_UNICAST, subphy_num,
									   DDR_PHY_DATA,
									   WL_PHY_REG(effective_cs), wr_data);
						}
					} else if (step == 3) {
						if (orig_phase <= 3) {
							wr_data = (rd_data & ~0x1c0) | ((orig_phase + 4) << 6);
							ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id,
									   ACCESS_TYPE_UNICAST, subphy_num,
									   DDR_PHY_DATA,
									   WL_PHY_REG(effective_cs), wr_data);
						}
					} else { /* error */
						flag = 0;
						compare_result = MV_DDR4_COMP_TEST_NO_RESULT;
						training_result[training_stage][if_id] = TEST_FAILED;
					}
				}
			}
		}
		if ((training_result[training_stage][if_id] == NO_TEST_DONE) ||
		    (training_result[training_stage][if_id] == TEST_SUCCESS))
			training_result[training_stage][if_id] = TEST_SUCCESS;
	}

	if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_DATA_PUPS) {
		/* enable ecc write mux */
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   TRAINING_SW_2_REG, 0x100, 0x100);
		if (status != MV_OK)
			return status;

		/* enable ecc mode*/
		status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
					   SDRAM_CFG_REG, 0x40000, 0x40000);
		if (status != MV_OK)
			return status;
	} else if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4 ||
		   ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3 ||
		   ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8) {
			/* enable ecc write mux */
			status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
						   TRAINING_SW_2_REG, 0x100, 0x100);
			if (status != MV_OK)
				return status;

			/* disable read data ecc mux */
			status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
						   TRAINING_SW_2_REG, 0x0, 0x3);
			if (status != MV_OK)
				return status;

			/* unset training start bit */
			status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
						   TRAINING_REG, 0x0, 0x80000000);
			if (status != MV_OK)
				return status;

			status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE,
						   TRAINING_SW_1_REG, 0x1 << 16, 0x1 << 16);
			if (status != MV_OK)
				return status;
	} else {
		/* do nothing for WRITE_LEVELING_SUPP_REG_MODE */;
	}
	if (training_result[training_stage][0] == TEST_SUCCESS)
		return MV_OK;
	else
		return MV_FAIL;
}
#endif /* CONFIG_DDR4 */