bspwm is a tiling window manager that represents windows as the leaves of a full binary tree.
It is controlled and configured via bspc.
- -h
-
Print the synopsis and exit.
- -v
-
Print the version and exit.
- -c CONFIG_PATH
-
Use the given configuration file.
bspwm has only two sources of informations: the X events it receives and the messages it reads on a dedicated socket.
The default configuration file is $XDG_CONFIG_HOME/bspwm/bspwmrc.
Keyboard and pointer bindings are defined with sxhkd.
Example configuration files can be found in the examples directory.
New windows are inserted in the tree as close as possible to the focused window.
There are only two splitting modes: automatic and manual.
The default mode is automatic. The manual mode is entered by sending a preselection message.
Example: insertion of a new node (number 4) into the given tree in automatic mode:
b c
/ \ / \
3 a --> 4 b
^ / \ ^ / \
2 1 3 a
/ \
2 1
+-------------------------+ +-------------------------+
| | | | | |
| | 2 | | | 3 |
| | | | | |
| 3 |------------| --> | 4 |------------|
| ^ | | | ^ | | |
| | 1 | | | 1 | 2 |
| | | | | | |
+-------------------------+ +-------------------------+Same action, but the mode is manual, and a window --presel up message was sent beforehand:
b b
/ \ / \
3 a --> c a
^ / \ / \ / \
2 1 4 3 2 1
^
+-------------------------+ +-------------------------+
| | | | | |
| | 2 | | 4 | 2 |
| | | | ^ | |
| 3 |------------| --> |------------|------------|
| ^ | | | | |
| | 1 | | 3 | 1 |
| | | | | |
+-------------------------+ +-------------------------+Selectors are used to select a target window, desktop, or monitor. A selector can either describe the target relatively or name it globally.
Descriptive (relative) selectors consist of a primary selector and any number of non-conflicting modifiers as follows:
PRIMARY_SELECTOR[.MODIFIER]*For obvious reasons, neither desktop nor monitor names may be valid descriptive selectors.
Select a window.
WINDOW_SEL := <window_id>
| (DIR|CYCLE_DIR|biggest|last|focused|older|newer)[.floating|.tiled][.like|.unlike][.manual|.automatic][.urgent][.local][.unfocused]- DIR
-
Selects the window in the given (spacial) direction relative to the active window.
- CYCLE_DIR
-
Selects the window in the given (cyclic) direction.
- biggest
-
Selects the biggest window on the current desktop.
- last
-
Selects the previously focused window.
- focused
-
Selects the currently focused window.
- older
-
Selects the window older than the focused window in the history.
- newer
-
Selects the window newer than the focused window in the history.
- floating
-
Only consider floating windows.
- tiled
-
Only consider tiled windows.
- like
-
Only consider windows that have the same class as the current window.
- unlike
-
Only consider windows that have a different class than the current window.
- manual
-
Only consider windows in manual splitting mode.
- automatic
-
Only consider windows in automatic splitting mode.
- local
-
Only consider windows of the current desktop.
- urgent
-
Only consider urgent windows.
- unfocused
-
Only consider windows other than the focused window.
Select a desktop.
DESKTOP_SEL := <desktop_name>
| [MONITOR_SEL:]^<n>
| (CYCLE_DIR|last|[MONITOR_SEL:]focused|older|newer)[.occupied|.free][.urgent][.local]- <desktop_name>
-
Selects the desktop with the given name.
- ^<n>
-
Selects the nth desktop.
- CYCLE_DIR
-
Selects the desktop in the given direction relative to the active desktop.
- last
-
Selects the previously focused desktop.
- focused
-
Selects the currently focused desktop.
- older
-
Selects the desktop older than the focused desktop in the history.
- newer
-
Selects the desktop newer than the focused desktop in the history.
Select a monitor.
MONITOR_SEL := <monitor_name>
| ^<n>
| (DIR|CYCLE_DIR|last|primary|focused|older|newer)[.occupied|.free]- <monitor_name>
-
Selects the monitor with the given name.
- ^<n>
-
Selects the nth monitor.
- DIR
-
Selects the monitor in the given (spacial) direction relative to the active monitor.
- CYCLE_DIR
-
Selects the monitor in the given (cyclic) direction relative to the active monitor.
- primary
-
Selects the primary monitor.
- last
-
Selects the previously focused monitor.
- focused
-
Selects the currently focused monitor.
- older
-
Selects the monitor older than the focused monitor in the history.
- newer
-
Selects the monitor newer than the focused monitor in the history.
- floating
-
Is above any tiled window and can be moved/resized freely. Although it doesn’t occupy any tiling space, it is still part of the window tree.
- pseudo_tiled
-
Has an unrestricted size while being centered in its tiling space.
- fullscreen
-
Fills its monitor rectangle, is above all the other windows and has no borders.
- locked
-
Ignores the close message.
- sticky
-
Stays in the focused desktop of its monitor.
- private
-
Tries to keep the same tiling position/size.
- -f, --focus [WINDOW_SEL]
-
Focus the selected or given window.
- -d, --to-desktop DESKTOP_SEL
-
Send the selected window to the given desktop.
- -m, --to-monitor MONITOR_SEL
-
Send the selected window to the given monitor.
- -w, --to-window WINDOW_SEL
-
Transplant the selected window to the given window.
- -s, --swap WINDOW_SEL
-
Swap the selected window with the given window.
- -p, --presel DIR|cancel
-
Preselect the splitting area of the selected window (or cancel the preselection).
- -r, --ratio RATIO
-
Set the splitting ratio of the selected window (0 < RATIO < 1).
- -e, --edge DIR RATIO|±PIXELS
-
Set or change the splitting ratio of the edge located in the given direction in relation to the selected window.
- -R, --rotate DIR 90|270|180
-
Rotate the tree holding the edge located in the given direction in relation to the selected window.
- -t, --toggle floating|fullscreen|pseudo_tiled|locked|sticky|private[=on|off]
-
Set or toggle the given state for the selected window.
- -c, --close
-
Close the selected window.
- -k, --kill
-
Kill the selected window.
- -f, --focus [DESKTOP_SEL]
-
Focus the selected or given desktop.
- -m, --to-monitor MONITOR_SEL
-
Send the selected desktop to the given monitor.
- -l, --layout CYCLE_DIR|monocle|tiled
-
Set or cycle the layout of the selected desktop.
- -n, --rename <new_name>
-
Rename the selected desktop.
- -s, --swap DESKTOP_SEL
-
Swap the selected desktop with the given desktop.
- -b, --bubble CYCLE_DIR
-
Bubble the selected desktop in the given direction.
- -r, --remove
-
Remove the selected desktop.
- -c, --cancel-presel
-
Cancel the preselection of all the windows of the selected desktop.
- -F, --flip horizontal|vertical
-
Flip the tree of the selected desktop.
- -R, --rotate 90|270|180
-
Rotate the tree of the selected desktop.
- -E, --equalize
-
Reset the split ratios of the tree of the selected desktop.
- -B, --balance
-
Adjust the split ratios of the tree of the selected desktop so that all windows occupy the same area.
- -C, --circulate forward|backward
-
Circulate the leaves of the tree of the selected desktop.
- -t, --toggle floating[=on|off]
-
Set or toggle the given state for the selected desktop.
- -f, --focus [MONITOR_SEL]
-
Focus the selected or given monitor.
- -a, --add-desktops <name>…
-
Create desktops with the given names in the selected monitor.
- -r, --remove-desktops <name>…
-
Remove desktops with the given names.
- -o, --reorder-desktops <name>…
-
Reorder the desktops of the selected monitor to match the given order.
- -d, --reset-desktops <name>…
-
Rename, add or remove desktops depending on whether the number of given names is equal, superior or inferior to the number of existing desktops. Incidentally reset the settings of the existing desktops.
- -n, --rename <new_name>
-
Rename the selected monitor.
- -s, --swap MONITOR_SEL
-
Swap the selected monitor with the given monitor.
- -W, --windows
-
List matching windows.
- -D, --desktops
-
List matching desktops.
- -M, --monitors
-
List matching monitors.
- -T, --tree
-
Print tree rooted at query.
- -H, --history
-
Print the history as it relates to the query.
- -S, --stack
-
Print the window stacking order.
- [-m,--monitor [MONITOR_SEL]] | [-d,--desktop [DESKTOP_SEL]] | [-w, --window [WINDOW_SEL]]
-
Constrain matches to the selected monitor, desktop or window.
- --adopt-orphans
-
Manage all the unmanaged windows remaining from a previous session.
- --toggle-visibility
-
Toggle the visibility of all the windows.
- --record-history on|off
-
Enable or disable the recording of window focus history.
- --subscribe (all|report|monitor|desktop|window|…)*
-
Continuously print status information.
- --get-status
-
Print the current status information.
- -a, --add <class_name>|<instance_name>|* [-o|--one-shot] [monitor=MONITOR_SEL|desktop=DESKTOP_SEL|window=WINDOW_SEL] [(floating|fullscreen|pseudo_tiled|locked|sticky|private|center|follow|manage|focus|border)=(on|off)] [split_dir=DIR] [split_ratio=RATIO]
-
Create a new rule.
- -r, --remove ^<n>|head|tail|<class_name>|<instance_name>|*…
-
Remove the given rules.
- -l, --list [<class_name>|<instance_name>|*]
-
List the rules.
If the server can’t handle a message, bspc will return with one of the following exit codes:
- 1
-
Failure.
- 2
-
Syntax error.
- 3
-
Unknown command.
Colors are either #RRGGBB or X color names, booleans are true, on, false or off.
All the boolean settings are false by default unless stated otherwise.
- focused_border_color
-
Color of the border of a focused window of a focused monitor.
- active_border_color
-
Color of the border of a focused window of an unfocused monitor.
- normal_border_color
-
Color of the border of an unfocused window.
- presel_border_color
-
Color of the presel message feedback.
- focused_locked_border_color
-
Color of the border of a focused locked window of a focused monitor.
- active_locked_border_color
-
Color of the border of a focused locked window of an unfocused monitor.
- normal_locked_border_color
-
Color of the border of an unfocused locked window.
- focused_sticky_border_color
-
Color of the border of a focused sticky window of a focused monitor.
- active_sticky_border_color
-
Color of the border of a focused sticky window of an unfocused monitor.
- normal_sticky_border_color
-
Color of the border of an unfocused sticky window.
- focused_private_border_color
-
Color of the border of a focused private window of a focused monitor.
- active_private_border_color
-
Color of the border of a focused private window of an unfocused monitor.
- normal_private_border_color
-
Color of the border of an unfocused private window.
- urgent_border_color
-
Color of the border of an urgent window.
- split_ratio
-
Default split ratio.
- status_prefix
-
Prefix prepended to each of the status lines.
- external_rules_command
-
External command used to retrieve rule consequences. The command will receive the the ID of the window being processed as its first argument and the class and instance names as second and third arguments. The output of that command must have the following format: key1=value1 key2=value2 … (the valid key/value pairs are given in the description of the rule command).
- initial_polarity
-
On which child should a new window be attached when adding a window on a single window tree in automatic mode. Accept the following values: first_child, second_child.
- history_aware_focus
-
Give priority to the focus history when focusing nodes.
- focus_by_distance
-
Base focusing on distances between windows.
- borderless_monocle
-
Remove borders for tiled windows in monocle mode.
- gapless_monocle
-
Remove gaps for tiled windows in monocle mode.
- focus_follows_pointer
-
Focus the window under the pointer.
- pointer_follows_focus
-
When focusing a window, put the pointer at its center.
- pointer_follows_monitor
-
When focusing a monitor, put the pointer at its center.
- auto_alternate
-
Interpret two consecutive identical use messages as an alternate message.
- auto_cancel
-
Interpret two consecutive identical presel messages as a cancel message.
- apply_floating_atom
-
Set the value of the _BSPWM_FLOATING_WINDOW atom of each window according to its floating state.
- ignore_ewmh_focus
-
Ignore EWMH focus requests coming from applications.
- center_pseudo_tiled
-
Center pseudo tiled windows into their tiling rectangles. Defaults to true.
- remove_disabled_monitors
-
Consider disabled monitors as disconnected.
- remove_unplugged_monitors
-
Remove unplugged monitors.
- merge_overlapping_monitors
-
Merge overlapping monitors (the bigger remains).
- top_padding
- right_padding
- bottom_padding
- left_padding
-
Padding space added at the sides of the monitor or desktop.
Status information is composed of items separated by colons.
Each item has the form <type><value> where <type> is the first character of the item.
- M<monitor_name>
-
Focused monitor.
- m<monitor_name>
-
Unfocused monitor.
- O<desktop_name>
-
Occupied focused desktop.
- o<desktop_name>
-
Occupied unfocused desktop.
- F<desktop_name>
-
Free focused desktop.
- f<desktop_name>
-
Free unfocused desktop.
- U<desktop_name>
-
Urgent focused desktop.
- u<desktop_name>
-
Urgent unfocused desktop.
- L(T|M)
-
Layout of the focused desktop of a monitor.
- BSPWM_SOCKET
-
The path of the socket used for the communication between bspc and bspwm. If it isn’t defined, then the following path is used: /tmp/bspwm<host_name>_<display_number>_<screen_number>-socket.
-
Any EWMH compliant panel (e.g.: tint2, bmpanel2, etc.).
-
A custom panel (have a look at the files in examples/panel).
-
Configured and controlled through messages.
-
Multiple monitors support.
-
EWMH support.
-
Hybrid tiling.
-
Steven Allen <steven at stebalien.com>
-
Thomas Adam <thomas at xteddy.org>
-
Ivan Kanakarakis <ivan.kanak at gmail.com>