We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hello, i'm working on a SAMA5D27 and an ATECC608B_SSHB Secure Element on a Yocto distro (Kirkstone branch). The ATECC608B seems works correctly
The device is connected on the 4th I2C bus at the address 0x60, so
But, following https://github.com/MicrochipTech/cryptoauthlib/wiki/PKCS11-Linux-Setup when I or openssl req -new -engine pkcs11 -keyform engine -key label_mykey -subj "/CN=My CSR" -x509 -out mykey_selfsigned_cert.pem
openssl req -new -engine pkcs11 -keyform engine -key label_mykey -subj "/CN=My CSR" -x509 -out mykey_selfsigned_cert.pem
with
root@obugo:/# cat /etc/openssl_atecc608b.conf openssl_conf = openssl_conf [openssl_conf] engines = engine_section [engine_section] pkcs11 = pkcs11_section [pkcs11_section] engine_id = pkcs11 dynamic_path = /usr/lib/engines-3/libpkcs11.so MODULE_PATH = /usr/lib/libcryptoauth.so init = 0
I got:
Engine "pkcs11" set. Unable to load module /usr/lib/libcryptoauth.so Unable to load module /usr/lib/libcryptoauth.so PKCS11_get_private_key returned NULL Could not read private key from org.openssl.engine:pkcs11:label_mykey 40AFF5B6:error:4180000A:PKCS#11 module:ERR_CKR_error:Cannott lock:../../git/src/p11_load.c:92: 40AFF5B6:error:13000080:engine routines:ENGINE_load_private_key:failed loading private key:../openssl-3.0.8/crypto/engine/eng_pkey.c:79:
Any suggestions?
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Hello,
i'm working on a SAMA5D27 and an ATECC608B_SSHB Secure Element on a Yocto distro (Kirkstone branch).
The ATECC608B seems works correctly
The device is connected on the 4th I2C bus at the address 0x60, so
But, following
https://github.com/MicrochipTech/cryptoauthlib/wiki/PKCS11-Linux-Setup
when I
or
openssl req -new -engine pkcs11 -keyform engine -key label_mykey -subj "/CN=My CSR" -x509 -out mykey_selfsigned_cert.pem
with
I got:
Any suggestions?
The text was updated successfully, but these errors were encountered: