mic33153

\mainpage Main Page

---

MIC33153 Click

MIC33153 Click is a DC-DC adjustable step-down (buck) converter that is designed to deliver a substantial amount of current to very demanding loads, with the voltage output up to 3.5V.

Click Product page

---

Click library

• Author : MikroE Team
• Date : Jan 2020.
• Type : SPI type

Software Support

We provide a library for the Mic33153 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Mic33153 Click driver.

Standard key functions :

• Config Object Initialization function.

void mic33153_cfg_setup ( mic33153_cfg_t *cfg );

• Initialization function.

MIC33153_RETVAL mic33153_init ( mic33153_t *ctx, mic33153_cfg_t *cfg );

• Click Default Configuration function.

void mic33153_default_cfg ( mic33153_t *ctx );

Example key functions :

• This function writes 12-bit value to DAC and that causes that output voltage be seted on determined value.

void mic33153_write_dac ( mic33153_t *ctx, const uint16_t value_dac );

• This function enables or disables output voltage depending on the state value.

void mic33153_enable_out ( mic33153_t *ctx, uint8_t state );

• This function hecks state of PG (INT) pin. If state is 1 that means that output voltage is above 92% of its steady
• state voltage. If state is 0 that means that output voltage is below 86% of its steady state voltage.

uint8_t mic33153_check_power_good ( mic33153_t *ctx );

Examples Description

This app enables step-down (buck) converter.

The demo application is composed of two sections :

Application Init

Initializes Click driver.

void application_init ( void )
{
    log_cfg_t log_cfg;
    mic33153_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    mic33153_cfg_setup( &cfg );
    MIC33153_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    mic33153_init( &mic33153, &cfg );
    Delay_ms ( 100 );
}
  

Application Task

Activates the output voltage of the device, and then sets output voltage to various different values. All data is being logged on USB UART.

void application_task ( void )
{
    mic33153_enable_out( &mic33153, MIC33153_OUT_ENABLE );
    
    mic33153_write_dac ( &mic33153, MIC33153_VOLTAGE_1000MV );
    log_printf( &logger, "Output voltage set to 1000mV\r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    mic33153_write_dac ( &mic33153, MIC33153_VOLTAGE_1500MV );
    log_printf( &logger, "Output voltage set to 1500mV\r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    mic33153_write_dac ( &mic33153, MIC33153_VOLTAGE_2000MV );
    log_printf( &logger, "Output voltage set to 2000mV\r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    mic33153_write_dac ( &mic33153, MIC33153_VOLTAGE_2500MV );
    log_printf( &logger, "Output voltage set to 2500mV\r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    mic33153_write_dac ( &mic33153, MIC33153_VOLTAGE_3000MV );
    log_printf( &logger, "Output voltage set to 3000mV\r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    mic33153_write_dac ( &mic33153, MIC33153_VOLTAGE_3200MV );
    log_printf( &logger, "Output voltage set to 3200mV\r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    
    log_printf( &logger, "-----------------------------------\r\n" );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Mic33153

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---