pac1954

\mainpage Main Page

---

PAC1954 Click

PAC1954 Click is a compact add-on board that contains an energy monitoring solution. This board features the PAC1954, a four-channel DC power/energy monitor from Microchip Technology. It uses real-time calibration to minimize offset and gain errors with no input filters required for this device.

Click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Jun 2021.
• Type : I2C type

Software Support

We provide a library for the PAC1954 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for PAC1954 Click driver.

Standard key functions :

• pac1954_cfg_setup Config Object Initialization function.

void pac1954_cfg_setup ( pac1954_cfg_t *cfg );

• pac1954_init Initialization function.

err_t pac1954_init ( pac1954_t *ctx, pac1954_cfg_t *cfg );

• pac1954_default_cfg Click Default Configuration function.

err_t pac1954_default_cfg ( pac1954_t *ctx );

Example key functions :

• pac1954_refresh_cmd This function updates the readable registers for the VBUS, VSENSE, Power, accumulator outputs and accumulator count by issuing the REFRESH command. The values will be static until the next REFRESH command.

err_t pac1954_refresh_cmd ( pac1954_t *ctx );

• pac1954_get_calc_measurement This function calls the function for getting the selected measurement data and performs all the necessary calculations to get the measurement value in standard unit.

err_t pac1954_get_calc_measurement ( pac1954_t *ctx, uint8_t meas_sel, uint8_t ch_sel, uint8_t avg_sel, uint8_t meas_mode, float *data_out );

• pac1954_generic_write This function writes a desired number of data bytes starting from the selected register by using I2C serial interface.

err_t pac1954_generic_write ( pac1954_t *ctx, uint8_t reg, uint8_t *tx_buf, uint8_t tx_len );

Example Description

This example demonstrates the use of PAC1954 Click board.

The demo application is composed of two sections :

Application Init

Initializes the driver and performs the Click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;          /**< Logger config object. */
    pac1954_cfg_t pac1954_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    pac1954_cfg_setup( &pac1954_cfg );
    PAC1954_MAP_MIKROBUS( pac1954_cfg, MIKROBUS_1 );
    err_t init_flag = pac1954_init( &pac1954, &pac1954_cfg );
    if ( I2C_MASTER_ERROR == init_flag ) 
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }

    pac1954_default_cfg ( &pac1954 );
    log_info( &logger, " Application Task " );
}

Application Task

Reads the voltage, current, and power from Channel 1 and displays all values on the USB UART once per second.

void application_task ( void )
{
    float vsource = 0;
    float isense = 0;
    float power = 0;

    pac1954_refresh_cmd ( &pac1954 );
    
    pac1954_get_calc_measurement ( &pac1954, PAC1954_MEAS_SEL_V_SOURCE, 
                                             PAC1954_CH_SEL_CH_1, 
                                             PAC1954_AVG_SEL_ENABLE, 
                                             PAC1954_MEAS_MODE_BIPOLAR_FSR,
                                             &vsource );
    pac1954_get_calc_measurement ( &pac1954, PAC1954_MEAS_SEL_I_SENSE, 
                                             PAC1954_CH_SEL_CH_1, 
                                             PAC1954_AVG_SEL_ENABLE, 
                                             PAC1954_MEAS_MODE_BIPOLAR_FSR, 
                                             &isense );
    pac1954_get_calc_measurement ( &pac1954, PAC1954_MEAS_SEL_P_SENSE, 
                                             PAC1954_CH_SEL_CH_1, 
                                             0, 
                                             PAC1954_MEAS_MODE_BIPOLAR_FSR, 
                                             &power );
    
    log_printf( &logger, " Voltage: %.3f V\r\n", vsource );
    log_printf( &logger, " Current: %.3f A\r\n", isense );
    log_printf( &logger, " Power: %.3f W\r\n", power );
    log_printf( &logger, "---------------------------\r\n" );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.PAC1954

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---