A pure JavaScript implemetation of MODBUS-RTU (Serial and TCP) for NodeJS.
Modbus is a serial communications protocol, first used in 1979. Modbus is simple and robust, openly published, royalty-free and easy to deploy and maintain.
This package makes Modbus calls and serve fun and easy.
npm install modbus-serial
try these options on npm install to build, if you have problems to install
--unsafe-perm --build-from-source
This class makes it fun and easy to communicate with electronic devices such as irrigation controllers, protocol droids and robots. It talks with devices that use a serial line (e.g. RS485, RS232). Many industrial electronic devices implement modbus. Arduino can also talk modbus and you can control your projects and robots using modbus.
Arduino libraries for modbus slave:
- https://github.com/yaacov/arduino-modbus-slave
- https://github.com/smarmengol/Modbus-Master-Slave-for-Arduino
Arduino sketch for irrigation timer with modbus support:
Node Modbus-WebSocket bridge:
This module has not been tested on every single version of NodeJS. For best results you should stick to LTS versions, which are denoted by even major version numbers e.g. 4.x, 6.x, 8.x.
| Class | Function |
|---|---|
| FC1 "Read Coil Status" | readCoils(coil, len) |
| FC2 "Read Input Status" | readDiscreteInputs(addr, arg) |
| FC3 "Read Holding Registers" | readHoldingRegisters(addr, len) |
| FC4 "Read Input Registers" | readInputRegisters(addr, len) |
| FC5 "Force Single Coil" | writeCoil(coil, binary) //NOT setCoil |
| FC6 "Preset Single Register" | writeRegister(addr, value) |
| FC15 "Force Multiple Coil" | writeCoils(addr, valueAry) |
| FC16 "Preset Multiple Registers" | writeRegisters(addr, valueAry) |
| FC43/14 "Read Device Identification" (supported ports: TCP, RTU) | readDeviceIdentification(id, obj) |
- modbus-RTU (SerialPort): Over serial line [require node serialport].
- modbus-RTU (RTUBufferedPort): Over buffered serial line [require node serialport].
- modbus-ASCII (AsciiPort): Over serial line [require node serialport].
- modbus-TCP (TcpPort): Over TCP/IP line.
- modbus-RTU (UdpPort): Over C701 server, commercial UDP to serial bridge.
- modbus-RTU (TcpRTUBufferedPort): Over TCP/IP line, TCP/IP serial RTU buffered device.
- modbus-RTU (TelnetPort): Over Telnet server, TCP/IP serial bridge.
- modbus-TCP (ServerTCP): Over TCP/IP line.
// create an empty modbus client
var ModbusRTU = require("modbus-serial");
var client = new ModbusRTU();
// open connection to a serial port
client.connectRTUBuffered("/dev/ttyUSB0", { baudRate: 9600 }, write);
function write() {
client.setID(1);
// write the values 0, 0xffff to registers starting at address 5
// on device number 1.
client.writeRegisters(5, [0 , 0xffff])
.then(read);
}
function read() {
// read the 2 registers starting at address 5
// on device number 1.
client.readHoldingRegisters(5, 2)
.then(console.log);
}const ModbusRTU = require("modbus-serial");
// create an empty modbus client
const client = new ModbusRTU();
// open connection to a serial port
client.connectRTUBuffered("/dev/ttyS0", { baudRate: 9600 });
// set timeout, if slave did not reply back
client.setTimeout(500);
// list of meter's id
const metersIdList = [10, 11, 12, 13, 14];
const getMetersValue = async (meters) => {
try{
// get value of all meters
for(let meter of meters) {
// output value to console
console.log(await getMeterValue(meter));
// wait 100ms before get another device
await sleep(100);
}
} catch(e){
// if error, handle them here (it should not)
console.log(e)
} finally {
// after get all data from salve repeate it again
setImmediate(() => {
getMetersValue(metersIdList);
})
}
}
const getMeterValue = async (id) => {
try {
// set ID of slave
await client.setID(id);
// read the 1 registers starting at address 0 (first register)
let val = await client.readInputRegisters(0, 1);
// return the value
return val.data[0];
} catch(e){
// if error return -1
return -1
}
}
const sleep = (ms) => new Promise(resolve => setTimeout(resolve, ms));
// start get value
getMetersValue(metersIdList);// create an empty modbus client
var ModbusRTU = require("modbus-serial");
var client = new ModbusRTU();
// open connection to a serial port
client.connectRTUBuffered("/dev/ttyUSB0", { baudRate: 9600 });
client.setID(1);
// read the values of 10 registers starting at address 0
// on device number 1. and log the values to the console.
setInterval(function() {
client.readHoldingRegisters(0, 10, function(err, data) {
console.log(data.data);
});
}, 1000);// create an empty modbus client
var ModbusRTU = require("modbus-serial");
var client = new ModbusRTU();
// open connection to a tcp line
client.connectTCP("127.0.0.1", { port: 8502 });
client.setID(1);
// read the values of 10 registers starting at address 0
// on device number 1. and log the values to the console.
setInterval(function() {
client.readHoldingRegisters(0, 10, function(err, data) {
console.log(data.data);
});
}, 1000);// create an empty modbus client
var ModbusRTU = require("modbus-serial");
var client = new ModbusRTU();
// open connection to a udp line
client.connectUDP("127.0.0.1", { port: 8502 });
client.setID(1);
// read the values of 10 registers starting at address 0
// on device number 1. and log the values to the console.
setInterval(function() {
client.readHoldingRegisters(0, 10, function(err, data) {
console.log(data.data);
});
}, 1000);// create an empty modbus client
var ModbusRTU = require("modbus-serial");
var vector = {
getInputRegister: function(addr, unitID) {
// Synchronous handling
return addr;
},
getHoldingRegister: function(addr, unitID, callback) {
// Asynchronous handling (with callback)
setTimeout(function() {
// callback = function(err, value)
callback(null, addr + 8000);
}, 10);
},
getCoil: function(addr, unitID) {
// Asynchronous handling (with Promises, async/await supported)
return new Promise(function(resolve) {
setTimeout(function() {
resolve((addr % 2) === 0);
}, 10);
});
},
setRegister: function(addr, value, unitID) {
// Asynchronous handling supported also here
console.log("set register", addr, value, unitID);
return;
},
setCoil: function(addr, value, unitID) {
// Asynchronous handling supported also here
console.log("set coil", addr, value, unitID);
return;
},
readDeviceIdentification: function(addr) {
return {
0x00: "MyVendorName",
0x01: "MyProductCode",
0x02: "MyMajorMinorRevision",
0x05: "MyModelName",
0x97: "MyExtendedObject1",
0xAB: "MyExtendedObject2"
};
}
};
// set the server to answer for modbus requests
console.log("ModbusTCP listening on modbus://0.0.0.0:8502");
var serverTCP = new ModbusRTU.ServerTCP(vector, { host: "0.0.0.0", port: 8502, debug: true, unitID: 1 });
serverTCP.on("socketError", function(err){
// Handle socket error if needed, can be ignored
console.error(err);
});// create an empty modbus client
var Modbus = require("modbus-serial");
var client = new Modbus();
// open connection to a serial port
client.connectAsciiSerial(
"/dev/ttyUSB0",
{
baudRate: 9600,
startOfSlaveFrameChar: 0x3A // optional: slave frame delimiter
},
write);
function write() {
client.setID(1);
// write the values 0, 0xffff to registers starting at address 5
// on device number 1.
client.writeRegisters(5, [0 , 0xffff])
.then(read);
}
function read() {
// read the 2 registers starting at address 5
// on device number 1.
client.readHoldingRegisters(5, 2)
.then(console.log);
}to get more see Examples
node-modbus-serial use node-serialport for serial communication, for serial port options settings it passes to serial port the openOptions object, default serial port settings are 9600,8,n,1.
client.connectRTUBuffered("/dev/ttyUSB0", { baudRate: 9600, parity: 'even' });