Skip to content

Latest commit

 

History

History
249 lines (208 loc) · 13.3 KB

README.md

File metadata and controls

249 lines (208 loc) · 13.3 KB
Raw

PigPen is map-reduce for Clojure, or distributed Clojure. It compiles to Apache Pig or Cascading but you don't need to know much about either of them to use it.

Getting Started, Tutorials & Documentation

Getting started with Clojure and PigPen is really easy.

Note: It is strongly recommended to familiarize yourself with Clojure before using PigPen.

Note: PigPen is not a Clojure wrapper for writing Pig scripts you can hand edit. While entirely possible, the resulting scripts are not intended for human consumption.

Questions & Complaints

Artifacts

pigpen is available from Maven:

With Leiningen:

;; core library
[com.netflix.pigpen/pigpen "0.3.3"]

;; pig support
[com.netflix.pigpen/pigpen-pig "0.3.3"]

;; cascading support
[com.netflix.pigpen/pigpen-cascading "0.3.3"]

;; rx support
[com.netflix.pigpen/pigpen-rx "0.3.3"]

The platform libraries all reference the core library, so you only need to reference the platform specific one that you require and the core library should be included transitively.

Note: PigPen requires Clojure 1.5.1 or greater

Parquet

To use the parquet loader, add this to your dependencies:

[com.netflix.pigpen/pigpen-parquet-pig "0.3.3"]

Here an example of how to write parquet data.

(require '[pigpen.core :as pig])
(require '[pigpen.parquet :as pqt])

;;
;; assuming that `data` is in tuples
;;
;; [["John" "Smith" 28]
;;  ["Jane" "Doe"   21]]

(defn save-to-parquet
  [output-file data]
  (->> data
       ;; turning tuples into a map
       (pig/map (partial zipmap [:firstname :lastname :age]))
       ;; then storing to Parquet files
       (pqt/store-parquet
        output-file
        (pqt/message "test-schema"
                     ;; the field names here MUST match the map's keys
                     (pqt/binary "firstname")
                     (pqt/binary "lastname")
                     (pqt/int64  "age")))))

And how to load the records back:

(defn load-from-parquet
  [input-file]
  ;; the output will be a sequence of maps
  (pqt/load-parquet
   input-file
   (pqt/message "test-schema"
                (pqt/binary "firstname")
                (pqt/binary "lastname")
                (pqt/int64  "age"))))

And check out the pigpen.parquet namespace for usage.

Note: Parquet is currently only supported by Pig

Avro

To use the avro loader (alpha), add this to your dependencies:

[com.netflix.pigpen/pigpen-avro-pig "0.3.3"]

And check out the pigpen.avro namespace for usage.

Note: Avro is currently only supported by Pig

Release Notes

  • 0.3.3 - 5/19/16

    • Explicitly disable *print-length* and *print-level* when generating scripts
    • Add a better error message for storage types that expect a map with keywords

  • 0.3.2 - 1/12/16

    • Allow more types in generated pig scripts

  • 0.3.1 - 10/19/15

    • Update cascading version to 2.7.0
    • Report correct pigpen version to concurrent
    • Update nippy to 2.10.0 & tune performance

  • 0.3.0 - 5/18/15

    • No changes

  • 0.3.0-rc-7 - 4/29/15

    • Fixed bug in local mode where nils weren't handled consistently

  • 0.3.0-rc.6 - 4/14/15

    • Add local mode code eval memoization to avoid thrashing permgen
    • Added pigpen.pig/set-options command to explicitly set pig options in a script. This was previously available (though undocumented) by setting {:pig-options {...}} in any options block, but is now official.

  • 0.3.0-rc.5 - 4/9/15

    • Update core.async version

  • 0.3.0-rc.4 - 4/8/15

    • Memoize code evaluation when run in the cluster

  • 0.3.0-rc.3 - 4/2/15

    • Bugfixes

  • 0.3.0-rc.2 - 3/30/15

    • Parquet refactor. Local parquet loading no longer depends on Pig. Parquet schemas are now defined using Parquet classes.

  • 0.3.0-rc.1 - 3/23/15

    • Added Cascading support
    • Added pigpen.core/keys-fn, a new convenience macro to support named anonymous functions. Like keys destructuring, but less verbose.
    • New function based operators to build more dynamic scripts. These are function versions of all the core pigpen macros, but you have to handle quoting user code manually. These were previously available, but not officially supported. Now they're alpha, but supported and documented. See pigpen.core.fn
    • New lower-level operators to build custom storage and commands. These were previously available, but not officially supported. Now they're alpha, but supported and documented. See pigpen.core.op
    • *** Breaking Changes ***
      • pigpen.core/script is now pigpen.core/store-many
      • pigpen.core/generate-script is now pigpen.pig/generate-script
      • pigpen.core/write-script is now pigpen.pig/write-script
      • pigpen.core/show is now pigpen.viz/show (requires dependency [com.netflix.pigpen/pigpen-viz "..."])
      • pig/dump has changed. The old version was based on rx-java, and still exists as pigpen.rx/dump. The replacement for pigpen.core/dump is now entirely Clojure based. The Clojure version is better for unit tests and small data. All stages are evaluated eagerly, so the stack traces are simpler to read. The rx version is lazy, including the load-* commands. This means that you can load a large file, take a few rows, and process them without loading the entire file into memory. The downside is confusing stack traces and extra dependencies. See here for more details.
      • The interface for building custom loaders and storage has changed. See here for more details. Please email pigpen-support@googlegroups.com with any questions.

  • 0.2.15 - 2/20/15

    • Include sources in jars

  • 0.2.14 - 2/18/15

    • Avro updates

  • 0.2.13 - 1/19/15

    • Added load-avro in the pigpen-avro project: http://avro.apache.org/
    • Fixed the nRepl configuration; use gradlew nRepl to start an nRepl
    • Exclude nested relations from closures

  • 0.2.12 - 12/16/14

    • Added load-csv, which allows for quoting per RFC 4180

  • 0.2.11 - 10/24/14

    • Fixed a bug (feature?) introduced by new rx version. Also upgraded to rc7. This would have only affected local mode where the data being read was faster than the code consuming it.

  • 0.2.10 - 9/21/14

    • Removed load-pig and store-pig. The pig data format is very bad and should not be used. If you used these and want them back, email pigpen-support@googlegroups.com and we'll put it into a separate jar. The jars required for this feature were causing conflicts elsewhere.
    • Upgraded the following dependencies:
      • org.clojure/clojure 1.5.1 -> 1.6.0 - this was also changed to a provided dependency, so you should be able to use any version greater than 1.5.1
      • org.clojure/data.json 0.2.2 -> 0.2.5
      • com.taoensso/nippy 2.6.0-RC1 -> 2.6.3
      • clj-time 0.5.0 - no longer needed
      • joda-time 2.2 -> 2.4 - pig needs this to run locally
      • instaparse 1.2.14 - no longer needed
      • io.reactivex/rxjava 0.9.2 -> 1.0.0-rc.1
    • Fixed the rx limit bug. pigpen.local/*max-load-records* is no longer required.

  • 0.2.9 - 9/16/14

    • Fix a local-mode bug in pigpen.fold/avg where some collections would produce a NPE.
    • Change fake pig delimiter to \n instead of \0. Allows for \0 to exist in input data.
    • Remove 1000 record limit for local-mode. This was originally introduced to mitigate an rx bug. Until #61 is fixed, bind pigpen.local/*max-load-records* to the maximum number of records you want to read locally when reading large files. This now defaults to nil (no limit).
    • Fix a local dispatch bug that would prevent loading folders locally

  • 0.2.8 - 7/31/14

    • Fix a bug in load-tsv and load-lazy

  • 0.2.7 - 7/31/14 *** Don't use ***

  • 0.2.6 - 6/17/14

    • Minor optimization for local mode. The creation of a UDF was occurring for every value processed, causing it to run out of perm-gen space when processing large collections locally.
    • Fix (pig/return [])
    • Fix (pig/dump (pig/reduce + (pig/return [])))
    • Fix Longs in scripts that are larger than an Integer
    • Memoize local UDF instances per use of pig/dump
    • The jar location in the generated script is now configurable. Use the :pigpen-jar-location option with pig/generate-script or pig/write-script.

  • 0.2.5 - 4/9/14

    • Remove dump&show and dump&show+ in favor of pigpen.oven/bake. Call bake once and pass to as many outputs as you want. This is a breaking change, but I didn't increment the version because dump&show was just a tool to be used in the REPL. No scripts should break because of this change.
    • Remove dymp-async. It appeared to be broken and was a bad idea from the start.
    • Fix self-joins. This was a rare issue as a self join (with the same key) just duplicates data in a very expensive way.
    • Clean up functional tests
    • Fix pigpen.oven/clean. When it was pruning the graph, it was also removing REGISTER commands.

  • 0.2.4 - 4/2/14

    • Fix arity checking bug (affected varargs fns)
    • Fix cases where an Algebraic fold function was falling back to the Accumulator interface, which was not supported. This affected using cogroup with fold over multiple relations.
    • Fix debug mode (broken in 0.1.5)
    • Change UDF initialization to not rely on memoization (caused stale data in REPL)
    • Enable AOT. Improves cluster perf
    • Add :partition-by option to distinct

  • 0.2.3 - 3/27/14

    • Added load-json, store-json, load-string, store-string
    • Added filter-by, and remove-by

  • 0.2.2 - 3/25/14

    • Fixed bug in pigpen.fold/vec. This would also cause fold/map and fold/filter to not work when run in the cluster.

  • 0.2.1 - 3/24/14

    • Fixed bug when using for to generate scripts
    • Fixed local mode bug with map followed by reduce or fold

  • 0.2.0 - 3/3/14

    • Added pigpen.fold - Note: this includes a breaking change in the join and cogroup syntax as follows:
    ; before
(pig/join (foo on :f)
          (bar on :b optional)
          (fn [f b] ...))

; after
(pig/join [(foo :on :f)
           (bar :on :b :type :optional)]
          (fn [f b] ...))

    Each of the select clauses must now be wrapped in a vector - there is no longer a varargs overload to either of these forms. Within each of the select clauses, :on is now a keyword instead of a symbol, but a symbol will still work if used. If optional or required were used, they must be updated to :type :optional and :type :required, respectively.

  • 0.1.5 - 2/17/14

    • Performance improvements
      • Implemented Pig's Accumulator interface
      • Tuned nippy
      • Reduced number of times data is serialized

  • 0.1.4 - 1/31/14

    • Fix sort bug in local mode

  • 0.1.3 - 1/30/14

    • Change Pig & Hadoop to be transitive dependencies
    • Add support for consuming user code via closure

  • 0.1.2 - 1/3/14

    • Upgrade instaparse to 1.2.14

  • 0.1.1 - 1/3/14

    • Initial Release