forked from KiloQubit/probe_accuracy
-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathtest_probe_accuracy.cfg
125 lines (111 loc) · 6.1 KB
/
test_probe_accuracy.cfg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
[gcode_macro TEST_PROBE_ACCURACY]
# Continuously run PROBE_ACCURACY while:
# - idling for START_IDLE_MINUTES
# - heating the bed to BED_TEMP
# - once at BED_TEMP, letting the bed soak for BED_SOAK_MINUTES
# - with the bed still on, heating the extruder to EXTRUDER_TEMP
# - once at EXTRUDER_TEMP, letting the extruder soak for EXTRUDER_SOAK_MINUTES
# - turning off the heaters, and idling for END_IDLE_MINUTES
default_parameter_START_IDLE_MINUTES: 5
default_parameter_END_IDLE_MINUTES: 10
default_parameter_BED_TEMP: 110
default_parameter_EXTRUDER_TEMP: 240
default_parameter_BED_SOAK_MINUTES: 30
default_parameter_EXTRUDER_SOAK_MINUTES: 15
default_parameter_DWELL_SECONDS: 1
default_parameter_DWELL_LIFT_Z: -1
variable_start_idle_minutes: 0
variable_bed_temp: 0
variable_extruder_temp: 0
variable_bed_soak_minutes: 0
variable_extruder_soak_minutes: 0
variable_dwell_seconds: 0
variable_dwell_lift_z: 0
variable_end_idle_minutes: 0
variable_state: 'start'
variable_next_state: 'none'
gcode:
# Copy parameters into gcode variables.
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=start_idle_minutes VALUE={ START_IDLE_MINUTES|int }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=bed_temp VALUE={ BED_TEMP|int }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=extruder_temp VALUE={ EXTRUDER_TEMP|int }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=bed_soak_minutes VALUE={ BED_SOAK_MINUTES|int }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=extruder_soak_minutes VALUE={ EXTRUDER_SOAK_MINUTES|int }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=dwell_seconds VALUE={ DWELL_SECONDS|int }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=dwell_lift_z VALUE={ DWELL_LIFT_Z|int }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=end_idle_minutes VALUE={ END_IDLE_MINUTES|int }
# Initialize state variables in case they have old values from last run.
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"start"'
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=next_state VALUE='"none"'
# Schedule main loop.
UPDATE_DELAYED_GCODE ID=probe_accuracy_loop DURATION=1
[delayed_gcode probe_accuracy_loop]
gcode:
{% set tmacro = printer['gcode_macro TEST_PROBE_ACCURACY'] %}
{% if tmacro.state == 'start' %}
{ action_respond_info('TEST_PROBE_ACCURACY: START') }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"start_idle"'
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=next_state VALUE='"start_idle_done"'
UPDATE_DELAYED_GCODE ID=probe_accuracy_set_next_state DURATION={ tmacro.start_idle_minutes|int * 60 }
{% elif tmacro.state == 'start_idle_done' %}
{% if tmacro.bed_temp >= 0 %}
M140 S{ tmacro.bed_temp }
{ action_respond_info('TEST_PROBE_ACCURACY: BED HEATING TO %s' % tmacro.bed_temp) }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"bed_heating"'
{% else %}
# Skip heating and soaking the bed, go directly to bed_soaked state.
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"bed_soaked"'
{% endif %}
{% elif tmacro.state == 'bed_heating' %}
{% if printer.heater_bed.temperature >= tmacro.bed_temp %}
{ action_respond_info('TEST_PROBE_ACCURACY: BED HEATED TO %s' % tmacro.bed_temp) }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"bed_soaking"'
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=next_state VALUE='"bed_soaked"'
UPDATE_DELAYED_GCODE ID=probe_accuracy_set_next_state DURATION={ tmacro.bed_soak_minutes|int * 60 }
{% endif %}
{% elif tmacro.state == 'bed_soaked' %}
{% if tmacro.bed_temp >= 0 %}
{ action_respond_info('TEST_PROBE_ACCURACY: BED SOAKED') }
{% endif %}
{% if tmacro.extruder_temp >= 0 %}
M104 S{ tmacro.extruder_temp }
{ action_respond_info('TEST_PROBE_ACCURACY: EXTRUDER HEATING TO %s' % tmacro.extruder_temp) }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"extruder_heating"'
{% else %}
# Skip heating and soaking the extruder, go directly to extruder_soaked state.
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"extruder_soaked"'
{% endif %}
{% elif tmacro.state == 'extruder_heating' %}
{% if printer.extruder.temperature >= tmacro.extruder_temp %}
{ action_respond_info('TEST_PROBE_ACCURACY: EXTRUDER HEATED TO %s' % tmacro.extruder_temp) }
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"extruder_soaking"'
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=next_state VALUE='"extruder_soaked"'
UPDATE_DELAYED_GCODE ID=probe_accuracy_set_next_state DURATION={ tmacro.extruder_soak_minutes|int * 60 }
{% endif %}
{% elif tmacro.state == 'extruder_soaked' %}
{% if tmacro.extruder_temp >= 0 %}
{ action_respond_info('TEST_PROBE_ACCURACY: EXTRUDER SOAKED') }
{% endif %}
TURN_OFF_HEATERS
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"end_idle"'
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=next_state VALUE='"done"'
UPDATE_DELAYED_GCODE ID=probe_accuracy_set_next_state DURATION={ tmacro.end_idle_minutes|int * 60 }
{% elif tmacro.state == 'done' %}
{ action_respond_info('TEST_PROBE_ACCURACY: DONE') }
G90
G1 Z30
UPDATE_DELAYED_GCODE ID=probe_accuracy_loop DURATION=0
{% endif %}
{% if tmacro.state != 'done' %}
M105
PROBE_ACCURACY
{% if tmacro.dwell_lift_z >= 0 %}
G1 Z{ tmacro.dwell_lift_z }
{% endif %}
M400
UPDATE_DELAYED_GCODE ID=probe_accuracy_loop DURATION={ tmacro.dwell_seconds }
{% endif %}
[delayed_gcode probe_accuracy_set_next_state]
gcode:
{% set tmacro = printer['gcode_macro TEST_PROBE_ACCURACY'] %}
SET_GCODE_VARIABLE MACRO=TEST_PROBE_ACCURACY VARIABLE=state VALUE='"{ tmacro.next_state }"'