V4.1.5

IMPORTANT: Breaking change! V4.x recommends a minimum of 7.1.2 of the OpenEVSE controller firmware, some features do not function with older EVSE controller firmware.

• Current shaper support - Throttle charge current following your house loads to prevent exceeding import limit
• Solar PV divert (EcoMode) fixes: #431
• Add ability to write factory settings #437
• MQTT fixes #424 #379
• Add French language support #422
• Fix ESP gateway board OTA upload #415
• LCD display tweaks #344

What's Changed

• Mqtt reworked API version by @KipK in #379
• Current shaper module by @KipK in #382
• Updated installer/WiFi setup screen to add Timer setup and Upgrade by @jeremypoulter in #395
• ESP32-PoE-ISO support, Ethernet doc reorg by @ianrrees in #418
• LCD info display corrections and date format tweak by @toofishes in #344
• fix retain flag faulty after VirtualBool switch. by @KipK in #412
• Issue #187 - Feed watchdog in http_update_write() & ESP Ethernet OTA upload by @ianrrees in #415
• Fix#411 by @KipK in #416
• added /scheduler /scheduler/set {json} to MQTT. by @KipK in #421
• I18n by @KipK in #422
• fix #424 by @KipK in #425
• Bump gui from a97e0e4 to 6954336 by @dependabot in #426
• Bump gui from 6954336 to b28ab16 by @dependabot in #430
• Divert updates by @jeremypoulter in #431
• Added the ability to set some write once 'factory' settings by @jeremypoulter in #437

New Contributors

• @KipK made their first contribution in #379
• @ianrrees made their first contribution in #418

Full Changelog: 4.1.4...4.1.5

Updating Firmware

Firmware can be updated via the web interface. Be sure to select the correct firmware for your hardware and unzip before uploading .bin

• Huzzah ESP8266 - can only run V2.x firmware, see archive V2.x repository
• Huzzah ESP32 - can run V3.x and V4.x firmware - use openevse_huzzah32.bin
• OpenEVSE V1 - designed for V4.x firmware - currently shipping in 2021 use openevse_wifi_v1.bin
• Olimex ESP32 Gateway (Wired Ethernet) - can run V3.x and V4.x firmware - use esp32-gateway-e.bin for rev E hardware and esp32-gateway-f.bin for rev F and rev G hardware

After updating FW browser cache may need clearing to reload the web interface

---

If the web interface cannot be loaded, the firmware must be loaded via a USB to serial programmer, see instructions in Readme.md.