You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hello, I have tried getting support through facebook and telegram and i can say task failed succesfully, despite i had enough evidence that my hardware setup is functional the people could not help me because they dont understand how to properly debug the issue. First of all i would like to address the installation process: i downloaded the image, used balena etcher and it booted. Pressing CTRL+ALT+F1 returned me to the terminal,i resized the filsystem connecting to my network through the inbuilt wifi went fine and also got a successful ssh connection. After that i used the keygen to make a drone.key and gs.key and transfered the key to the camera. checking the wifibroadcast.cfg file on the radxa and the wfb.cfg file on the camera they were on the same channel. I also checked the majestic.yaml file and it was set on h265 . by executing the lsusb command on both groundstation and camera the groundstation shows
realtek 8812au wifi adapter and the camera doesent show a name it just shows device id 0bda:881a witch is the device id for the rtl8812au, so basically i know that both air unit and ground station have been propely connected to the module. i have also went to the etc folder of the camera after transfering the drone key and removed it using rm -rf drone.key than used the following command:
root@openipc-ssc338q:scp root@192.168.1.245:/etc/drone.key . to retry copying the new drone key to the radxa. i attach the evidence of what happened in the terminal in the screenshots. even if it were to be a broken rf frontend on the wifi adapter, its highly unlikely and it should be easy to test, the wlan boards im using are basically brand new
The text was updated successfully, but these errors were encountered:
Hello, I have tried getting support through facebook and telegram and i can say task failed succesfully, despite i had enough evidence that my hardware setup is functional the people could not help me because they dont understand how to properly debug the issue. First of all i would like to address the installation process: i downloaded the image, used balena etcher and it booted. Pressing CTRL+ALT+F1 returned me to the terminal,i resized the filsystem connecting to my network through the inbuilt wifi went fine and also got a successful ssh connection. After that i used the keygen to make a drone.key and gs.key and transfered the key to the camera. checking the wifibroadcast.cfg file on the radxa and the wfb.cfg file on the camera they were on the same channel. I also checked the majestic.yaml file and it was set on h265 . by executing the lsusb command on both groundstation and camera the groundstation shows
realtek 8812au wifi adapter and the camera doesent show a name it just shows device id 0bda:881a witch is the device id for the rtl8812au, so basically i know that both air unit and ground station have been propely connected to the module. i have also went to the etc folder of the camera after transfering the drone key and removed it using rm -rf drone.key than used the following command:
root@openipc-ssc338q:scp root@192.168.1.245:/etc/drone.key . to retry copying the new drone key to the radxa. i attach the evidence of what happened in the terminal in the screenshots. even if it were to be a broken rf frontend on the wifi adapter, its highly unlikely and it should be easy to test, the wlan boards im using are basically brand new
The text was updated successfully, but these errors were encountered: