Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

mini wifi cam cant interrupt bootloader #1442

Open
pvtex opened this issue May 12, 2024 · 0 comments
Open

mini wifi cam cant interrupt bootloader #1442

pvtex opened this issue May 12, 2024 · 0 comments

Comments

@pvtex
Copy link

pvtex commented May 12, 2024

Hello,

i have a mini wifi cam with a T21 chip here.
it is a little cube with 4 IR LED in front.
modelname: SN-IPC-HW01

I am trying to interrupt the boot but cant do it;

i get this boot log:

`...test
mdev is ok......

aplink login: camera is run...

hsl_hw_eth...

hsl_router_filter...

hsl_hw_network product_type 16

ir_mode -1 tmp_mode -1

hsl_hw_upgrade...

hsl_get_product_type bat_type 0

hsl_net_search...

hsl_net_service...

hsl_media_service...

hsl_media_service1...

hsl_hw_sdcard...

hsl_hw_sdcard0...

hsl_hw_sdcard2...

hsl_hw_alarm0

hsl_hw_alarm1

hsl_hw_alarm2

hsl_net_web

camera is run0...

service_first_init

ioctl_msg_process is run...

set_date_time_init 1715284243

apmod 0 end_flag 5a81a518

hsl_danale_get_device_id0...

hsl_danale_get_device_id1...

hsl_danale_get_device_id:ccaa9ea835a5fab7e314621e9c61a454

hsl_danale_get_device_id len=32

system version:51.1.16.1.26

apmod 0 work_mode 0 pirconfig 1

danale_port 0

did:63-63

hsl_os_system init
init end
gpio_hw_init = 5

gpio_mux_init value=80260000 status 0

gpio_dir_init ok=0 value 80060000

gpio_adc_init is ok...

get_neight_value 77

get_day_value 101

hsl_hw_network check type 16

ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFADDR: No such device
ifconfig: eth0: error fetching interface information: Device not found
eth0 not find mac

hsl_hw_sensor init
sensor_drivers_insmod sensor_type 10

get_sensor_type sensor_type 22

Audio In GetChnParam usrFrmDepth : 20
IMP_AI_EnableAec...
set safe_suppression_value 1.500000
IMP_AI_EnableNs...
audio_in_init end...
audio_in_volume 30

audio_in_volume 30

===sensor_type===34

IMP_Encoder_SetPoolSize status 0
sensor name:jxh63

profile_begin 1592294000
aecMode = 0
dtdEnable = 1
dtdBandNum = 4
dtdPowThd = 6000000.000000
dtdDxRatio = 0.100000
safeSupression = 1.500000
timer_profile_end:869 IMP_ISP_AddSensor cost 291 ms
imp_sys_init...

sourcnt 3 picwidth 640 picheight 360

i264e[info]: profile High, level 3.1
i264e[info]: profile High, level 2.2
IMP_Encoder_CreateChn profile 0

imp_sys_encoder_init...

imp_osd_file_init=2054

osd init ok

service_first_start

profile_begin 1592294361
power on :0x00000001
value 31

play audio welcome...

audio_play_file_index 1

IMP_ISP_EnableTuning 0
video_mode 0

video_mode 0 modeH 0 modeV 0

video_env 1

enc_set_bitrate 1024

enc_set_bitrate 512

channel 0 isp_set_framerate 15

channel 1 isp_set_framerate 15

timer_profile_end:869 service_first_start cost 33 ms
service_first_start end

camera is run1...

profile_begin 1592294395
hsl_hw_ipc init...

hsl_hw_iic433 init
hsl_hw_eeprom init
hsl_hw_wdt timeout 30

hsl_hw_network type 16

product_type 16 platform_type 1 chip_type 51

hsl_hw_wifi...16

i 0 audio_file_index 1

audio_file_name = /system/audio/welcome.wav

tracker_license_init is ok...

IVS Version:1.0.5 built: Nov 30 2018 15:19:13
audio_out_volume 31

push main video seq 0

tracker_init is ok...

audio_out_volume 31

set safe_suppression_value 1.500000
===work on sta===

hsl_hw_wifi end

_get_wifi_mac ifconfig wlan0 > /tmp/get_wifi_mac.txt

hsl_hw_wifi end1

===wifi_ap_start_flag===0

killall: wpa_supplicant: no process killed
aecMode = 0
dtdEnable = 1
dtdBandNum = 4
dtdPowThd = 6000000.000000
dtdDxRatio = 0.100000
safeSupression = 1.500000
wifi_station_start...auth_type 4 wifi_index 1

7601 cmd:wpa_supplicant -Dnl80211 -i wlan0 -c /tmp/wifi_sta.config -B

hsl_log_init 0
Create broadcast success port(8600)
net search init...

sys_record.init...

sys_alarm.init...

===CURL_GLOBAL_ALL===

sys_web.init...

unzip web

unzip: can't open /system/www/web.zip[.zip]
web user:admin pwd:a123 ipaddr:192.168.88.149 webdir:/tmp/web webport:81
webdir:/tmp/web
timer_profile_end:869 service_init cost 5963 ms
profile_begin 1592300358
net search start...

hsl_net_cgi init...

timer_profile_end:869 service_start cost 4 ms
audio_live_process

search thread=0

_check_hardware_process...

===network_mode_switch=== network_mode 1 network_mode_back -1

camera is run2...

ifconfig: SIOCSIFADDR: No such device
wifi isn't connect...

network_mode = 1

===Ping 192.168.88.1(192.168.88.1): 56 bytes data in ICMP packets===
===network_mode_switch=== network_mode 1 network_mode_back -1

ifconfig: SIOCSIFADDR: No such device
---insmod sdcard drivers start---
wifi isn't connect...

network_mode = 1

===Ping 192.168.88.1(192.168.88.1): 56 bytes data in ICMP packets===
---insmod sdcard drivers---
===network_mode_switch=== network_mode 1 network_mode_back -1

ifconfig: SIOCSIFADDR: No such device
wifi_start_ipconfig...

network_type 1

wifi_status 2

killall: udhcpc: no process killed
ipaddr:192.168.88.149

mask:255.255.255.0

gateway:192.168.88.1

sysparam_save_note 0

sysparam_save_note...

===param_cmd===1 reboot_cmd=0

===param_cmd===1

sysparam save is start...

sysparam_write...0

network_mode = 1

===Ping 192.168.88.1(192.168.88.1): 56 bytes data in ICMP packets===
sysparam_write bak...0

---- (192.168.88.1) ping statistics ----
1 packets transmitted, 1 received, 0% packet loss
hw_p2p.init...

sys_cgi.init...
hsl_p2p_danale_user_init:16.1.26
hsl_p2p_danale_init...
hsl_p2p_dana_callback_init...
lib_danavideo_deviceid_from_conf...
did len 32
lib_danavideo_deviceid_from_conf...0
lib_danavideo_deviceid_from_conf:ccaa9ea835a5fab7e314621e9c61a454 filename:/factory
hsl_danale_get_device_id...
hsl_danale_get_device_id0...

hsl_danale_get_device_id1...

hsl_danale_get_device_id:ccaa9ea835a5fab7e314621e9c61a454

hsl_danale_get_device_id len=32

hsl_p2p_dana_suspend_init...
hsl_p2p_dana_suspend_init end
hsl_p2p_danale_start...
hsl_p2p_danavideo_init...
dbg_tail_start start Thread logtail_send succeeded
dbg_tail_start NOT Build with HAVE_DANA_LOCAL_LOGTAIL
sysparam save...

hsl_p2p_danavideo_start...
testdanavideo lib_danavideo_start succeeded
hsl_p2p_product_feature_init...
lib_danavideo_util_setdevicefeature 1 sizeof=8
lib_danavideo_util_setdeviceinfo 1 rom_version:16.1.26 api_version:1.0.190402 len 7
===deviceid:ccaa9ea835a5fab7e314621e9c61a454===
hsl_p2p_dana_cmd_callback...
hsl_p2p_dana_cmd_init...
hsl_p2p_danale_media_init...
hsl_p2p_danale_record_play_init...
hsl_p2p_dana_cloud_init...
lib_danavideo_cloud_set_cloud_mode_changed 0

===DANAVIDEO_CLOUD_MODE_REALTIME===

hsl_p2p_danale_reset_report...
CONF_create_or_updated conf_absolute_pathname: /factory/danale.conf
lib_danavideo_cloud_init is ok...

hsl_p2p_dana_cloud_init end...
dana_fw_upgrade_init status 1

now_time 1715549709 time_zone:GMT+02:00 ntp_server1:0.asia.pool.ntp.org ntp_server2:1.asia.pool.ntp.org
record_sync_timer_diff 265448

record_sync_timer_diff 265448

===utc_time 1715549709 cur_time 1715549709===
hsl_set_utc_time now 1715284261 utc_time 1715549709 diff 265448

sysparam_save_note 0

sysparam_save_note...

===param_cmd===1 reboot_cmd=0

===param_cmd===1

sysparam save is start...

sysparam_write...0

sysparam_write bak...0

sysparam save...

===gpio_irled_switch_by_hw===1

isp_ircut_switch by isp 1

isp_ircut_switch 1

status 0

isp_ircut_switch video_mode(1)[0:Day, 1:Night]

===gpio_irled_switch_by_hw===0

isp_ircut_switch by isp 0

isp_ircut_switch 0

isp_ircut_switch video_mode(0)[0:Day, 1:Night]

===gpio_irled_switch_by_hw===1

isp_ircut_switch by isp 1

isp_ircut_switch 1

status 0

isp_ircut_switch video_mode(1)[0:Day, 1:Night]
`

the login and password is not known.
does anybody know a way to interrupt the bootloader?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant