VSDMemSOC

VSDMemSOC Implementation flow:: RTL2GDSII

VSDMemSoC

VSDMemSoC is an SoC that includes a RISC-V based processor called RVMYTH and an external 1kB SRAM instruction memory (Imem), separating the instruction memory from the processor core.

Introduction to VSDMemSoC

The purpose of designing such an SOC to is to demonstrate the concept of separating the main core and memories of processor. This would help to make the RISC-V more modular and portable. Here, the instruction memory is separated.

RVMYTH

RVMYTH core is a simple RISCV-based CPU, introduced in a workshop by RedwoodEDA and VSD.Core is developed using TL-Verilog for faster development.

SRAM

An SRAM is a type of random-access memory (RAM) that uses latching circuitry (flip-flop) to store each bit. It is a volatile memory where data is lost when power is removed. It is typically used for the cache and internal registers of a CPU as it very fast but expensive. The SRAM here is a 1 kB 6-transistor type with a 8-bit address bus and 32-bit data bus.

RVMYTH Modelling

RISC-V is developed using Transactional verilog. So, we use sandpiper tool to convert the RVMYTH core written in TL-verilog to verilog.

SRAM Modelling

Here we used one of the SRAM's present in the PDK provided by the skywater sky130 technology. Here the sram used has 32-bit word size and 8-bit address space which results in 256 memory locations(words).

OpenLane Flow

Running OpenLane

Go to the OpenLane folder and run make mount. OpenLane uses several tools. The scripsts and tools used during the atomic commands are found in <OpenLane_dir>/scripts. Also OpenRoad related scripts are found in <OpenLane_dir>/scripts/openroad.

Commands to create and Run the design

Command used for creating the project for the first time ./flow.tcl -design vsdmemsoc init_design_config -add_to_designs For running the design in interactive mode ./flow.tcl -interactive For prepping the design prep -design vsdmemsoc Since we are using a SRAM Macro from the PDK, we need to add LEF files of that SRAM before we start the openlane flow. The following two commands are used to add the SRAM lef files to the design flow

set lefs [glob $::env(DESIGN_DIR)/src/macros/*.lef]
add_lefs -src $lefs

Synthesis
- Command run_synthesis
- Generating gate-level netlist (yosys). - Performing cell mapping (abc).
- Performing pre-layout STA (OpenSTA).
- Usefull info for design stage: Flip-flop ratio, chip area, timing performance
Floorplanning
- Command run_floorplan
- Defining the core area for the macro as well as the cell sites and the tracks (init_fp).
- Placing the macro input and output ports (ioplacer).
- Generating the power distribution network (pdn).
  - /results/ *.def , contains the design Core Area.
Placement
- run_placement - Performing global placement (RePLace).
- Perfroming detailed placement to legalize the globally placed components (OpenDP).
Clock Tree Synthesis (CTS)
- Synthesizing the clock tree (TritonCTS).
Routing
- Performing global routing to generate a guide file for the detailed router (FastRoute).
- Performing detailed routing (TritonRoute)
GDSII Generation
- Streaming out the final GDSII layout file from the routed def (Magic).

List of commands used in the openlane flow

cd OpenLane/ 
make mount 
{ If Error occurs use the below commands in OpenLane directory:
sudo chown $USER /var/run/docker.sock 
PYTHON_BIN=python3 make mount
}

./flow.tcl -interactive
package require openlane 0.9
prep -design picorv32a
run_synthesis
run_floorplan
run_placement
run_cts
run_routing
run_magic
run_magic_spice_export
run_magic_drc
run_netgen
run_magic_antenna_check

Synthesis Exploration

At the begining a synthesis strategy exploration can be done using OpenLane command ./flow.tcl -design vsdmemsoc synth_explore The ouput gives area estimation for different stratagies.

Image of synthesis stratagies table

After running synthesis, Pre-layout STA report and chip Area information is available.

Image of synthesis STA, Power

yosys report

Next step is the floorplan

.def file is created. Can be viewed using magic tool using the command magic -d XR -T /home/pa1mantri/.volare/sky130A/libs.tech/magic/sky130A.tech lef read ../../tmp/merged.nom.lef def read vsdmemsoc.def & tech and lef information is also provided to the magic tool.