IP150+ module do support SWAN disable - only local LAN network

[wili98w]

Hi just want to let you know, that there are special code that you can enter durring the IP 150+ module configuraiton, which allows you to use the module in LAN mode, without forcing or using SWAN servers.
In that mode, you are loosing ability to control the panel trough a WEB interface of the IP150+ module itself, but still you can manage the panel trough Paradox Gold app (and also through babyware and reprogramming)
It is working perfectly fine with HAAS as well. (Currently running on EVO192 with 6.5 - not encrypted FW)
Now upgrade request, no additional configuration of 150+ needed

Copying the screenshot of it

So this is a dedicated firmware v5.06.016 for ip150+ with support with all the new panels and firmware.

The only thing you should do is to enter "special firmware access code "IP150PCN" durring the upgrade process of IP150+.
It is possible from inField and Paradox Gold App.

in the Paradox Gold App is available in installer section

Statement from paradox!
Use the "IP150PCN" beta key to downgrade the module to v.5.06.016 for closed network operation.
v5.06.016 has a web interface for network setup. When SWAN polling is disabled, there is no trouble for network connection in closed networks.

Feature description

[wili98w]

Some screenshots from the ip150+ gui

[yozik04]

Thank you @wili98w

[mharizanov]

Thanks @wili98w

[lpaolini]

That's great! Thanks.

[robertoamd90]

On my module the update remain to 0%, i'm on App
any idea?
thanks

[robertoamd90]

On my module the update remain to 0%, i'm on App any idea? thanks

i have resolved using BabyWare + In-Field.

Thanks!

[budix1]

Hi, i am waiting for instalation Paradox alarm in my house. I have EVOHD+ and IP150+ . It is possible change to local without supplier software or what should I ask them to make it work for me? ? I'm already confused by this, I was expecting a simple integration.... thanks

[thibault-78]

Hello,
@wili98w many thanks. It perfectly worked for me (I was able to disable SWAN-> closed network)
I did not success to connect thought your method, I had to use: Static IP

[gfplab-scaffardi]

Hi! Thanx for the info but... i have an IP150 with bootloader 2.14.000 that requires a specific old version of infield. So i cannot access that firmware. Is there any way to have the same feature with my version of IP150?

If not, do you confirm that buying and updating in this way an IP150+ makes it useable in the same time with PAI and Insite Gold app?

Thank you!

[yozik04]

Not possible to use PAI and Insite Gold at the same time.

[iliantihov]

I can't access the IP150+ web interface anymore. Does anyone know how I can set up email notifications via BabyWare or some other way?

[J-Prince]

I managed to upgrade my IP150+ connected to an SP7000+ to version 5.06.016. I can connect to it successfully with PAI, all works well in Home Assistant (except the Voltage readings).

However, I am unable to connect to the IP150+ web interface.

I stop PAI, I access the web interface and see the following:

I enter my Master code, and then see this:

But after 20-30 seconds, it goes back to this:

Or sometimes I see this instead:

I tried with Edge, Firefox and Safari, all the same result.

Is there something wrong with the web interface of the IP150+ with firmware version 5.06.016 ? I would like to connect to it to set up email reporting, and to be able to access the alarm if the PAI or MQTT server is down and I'm away.

Firmware versions at Paradox are a mess and so hard to figure out, let alone not being publicly available for download...

[yozik04]

If PAI is stopped then nothing can interfere. It is IP150+ bug then.

[J-Prince]

If PAI is stopped then nothing can interfere. It is IP150+ bug then.

Yes, definitely not PAI's problem. I was just hoping to hear from others using that particular firmware version if they had the same issue with the web interface.

[Zemenv]

This post fixed my system, many thanks for it. I downgraded the firmware and knock on wood it is working. Good job.