servoCODE.innno

#include <Servo.h>
 

/* 
cod to run servo via myservo.attach(0,500,2400);  0-180 
:----------- remove500and 2400 to get 0-45
*/


Servo myservo;  // create servo object to control a servo
int potpin = 0;  // analog pin used to connect the potentiometer
int val;    // variable to read the value from the analog pin
void setup() {
  Serial.begin(9600); 
  
  myservo.attach(0);
  pinMode(D4,OUTPUT);

    // myservo.write(180);
  delay(5000);
  myservo.write(0);
  delay(2000);
  myservo.write(10);// attaches the servo on pin 9 to the servo object
}

void loop() {
  val = Serial.parseInt();       
    if (val!=0)
      digitalWrite(D4,HIGH);
    else 
      digitalWrite(D4,LOW);
  
  myservo.write(10);       // sets the servo position according to the scaled value
  delay(15);                           // waits for the servo to get there
}