pyspice.simulator.noise not working as expected

[MaxRonce]

Hello, could I have an example about how to use the simulation.noise with PySpice ?
All the online documentation that can be found online isn't very helpfull and I couldn't properly find how to use this function

I need to simulate a simple RLC circuit. (cf bellow)

and perform a noise analysis on this circuit. I've tried to use the transcient analysis or measure an impedance using pyspice spiluation : everything is working well.

But when I try to use the .noise simulation I can't use it properly.

    f_start = 1
    f_stop = 1000000
    circuit = Circuit(' Imp JUICE')

    V1 = circuit.SinusoidalVoltageSource('V1', 'N1', circuit.gnd, amplitude=1 @ u_V, frequency=1 @ u_kHz)
    circuit.R('1', 'N1', 'N001', 550 @ u_Ω)
    circuit.C('1', 'N2', 'N1', 150 @ u_pF)
    circuit.L('1', 'N2', 'N001', 12 @ u_H)
    circuit.R('2', 'N2', circuit.gnd, 1 @ u_kΩ)

    temperature = 25
    f_start = 1
    f_stop = 1000000


    simulator = circuit.simulator(temperature=temperature, nominal_temperature=25)
    analysis = simulator.noise(
        output_node='N1', 
        ref_node='N2', 
        src='V1',  
        points=100,
        start_frequency=f_start @u_Hz,  
        stop_frequency=f_stop @u_Hz,  
        variation='dec'
    )

error

Traceback (most recent call last):
  File "XX\PLASMAG\src\model\strategies\strategy_lib\SPICE.py", line 384, in <module>
    analysis = simulator.noise(
  File "XX\PLASMAG\lib\site-packages\PySpice\Spice\Simulation.py", line 1176, in noise
    return self._run('noise', *args, **kwargs)
  File "XX\lib\site-packages\PySpice\Spice\NgSpice\Simulation.py", line 118, in _run
    self._ngspice_shared.run()
  File "XX\lib\site-packages\PySpice\Spice\NgSpice\Shared.py", line 1168, in run
    self.exec_command(command)
  File "XX\lib\site-packages\PySpice\Spice\NgSpice\Shared.py", line 842, in exec_command
    raise NgSpiceCommandError("Command '{}' failed".format(command))
PySpice.Spice.NgSpice.Shared.NgSpiceCommandError: Command 'run' failed

I've ran the same simulation in the LTSpice software after recreating the RLC circuit in it, and the noise analysis works.

Does anyone could help me fixing this ? Or have a hint about how to use this function ?
I spent a lot of time without getting proper results.

[Kreijstal]

did you enable debug ouput